Let's distribute the Internet from an Android smartphone. How to distribute WiFi Internet from a laptop? WiFi router. Ownership setting.

Golovna / Main functionality

This article will teach you how to distribute the Internet in Windows 7 local lines or through Wi-Fi, as well as creating and creating folders from the open access.

Important! Possibility of distribution to the Internet standard procedures blocked in Windows 7 Starter, so you are a "happy" master of this version of the OS, further information will be available.

Setting up the physical connection of computers

D For starters, you will need to reconsider what you need computers connected to the LAN physically:

machines connected without intermediary via cable\router;
set all ranges of IP-address;
setting unique array names;
PCs are united into one working group.

Even with the first point, everything is easy to do (buy the cable, insert the cable from the required sockets), otherwise you can have some additional explanations.

The names of the extensions should be kept as short as possible, but sensible, so as not to let the swindler get away.
Those same hundred names working group for example, it is planned to grow a sprat.

I will especially protect the following at the assigned address.
You can set the system's median mask independently, and the axis without the middle range of IP can be set manually (for LAN - 192.168.xx.xx).

Important! IP-addresses at any time are not guilty of repetition!

How much do you need to connect two PCs

When connecting two computers for "rozsharuvannya", one PC takes over the role of the server (there can be attachments, which can go to the Internet), and the other - the client.

It is important to understand that with such a scheme of robots, it will be possible to enter the network with PC 2 ONLY when PC 1 is turned on, which will function properly.

In addition, for the server it is necessary to add additional property to a friend merezhu card(The Web will have connections to the slot of the first card, and LAN, obviously, to the slot of the other).

It will take more than two PCs to charge

If you want to connect to the Internet on a larger locale, below two computers, then there is nothing foldable in any of them, the difference is less in the wires, if you happen to be stretched and in the range of the required IP address.

In fact, for the task of connecting a large number of machines to the Internet, where it is easier to buy that set up a special router.
It is not necessary to forgive the tycoon and change the fee (the server will not need to work 24/7).

Important! For serious work (on a grand occasion or in a serious office) it is really recommended to use one simple and cheap router.

Setting up a computer that distributes the Internet

It’s over with the hardware part, it’s time to go, without a middle, to software customization computer.

Let's get it from the server, which needs to be configured through the standard Windows service 7 - ICS (Corruption Service).

Let's go:

Done, since you have everything set up correctly, the server can be upgraded and we are ready to work again.

Setting up a computer-client

Now let's move on to the installation of other outbuildings at the LAN.
The stinks will be called clients, and they will take away until “ to the all-world spider” via PC server.

Yak revert

In order for the system to work, it is necessary to specify the following parameters on the skin machine at the power connection:

IP addresses: 192.168.137.xx (xx > 1)
Default gateway: 192.168.137.1
DNS server: 192.168.137.1

Install the system mask independently.

Important! In the parameters, there is a button “Remove IP and gateway automatically”, or, if necessary, enter all the values manually, since you won’t take a lot of time.

Video Internet by local measure

Folder for koristuvachiv at the merezhі

Mayuchi nalashtovanu LAN Windows tool, such as a deep access, and even simpler - "rozsharuvannya" mesh disks and catalogues.

Once you have created a network resource, you can easily access non-essential storage with flash drives and hard disks, transferring data directly from one computer to another.

Create spilnu folder give strength to the pochatkivtsy.

Everything that needs to be done is to read the instructions clearly:

After vikonannya tsikh chotiriokh (and without detailed configuration changes - only three!) clumsy crochet, the selected catalog will be visible to all the employees of the working group and, if allowed, they can look over the stench, change it and add their files there.

The creation of an open-ended lace resource can really make life easier at a great apartment, office, and business. Don't waste your time spending five credits on the upgrade, so that you can spare more than one year for a big one from one PC to another!

Setting up Wi-Fi distribution through the command line

Information in this point is checked by the clerk of a netbook or a laptop wifi adapter. Distributing the Internet from a local network with such a device is much simpler, especially if you decide to add an attachment, so it is self-practicing with the standards of a wireless connection.

The simplest way to create a globally accessible WLAN is to command line Windows.
For whom it is not necessary to have a deep knowledge, or to install it in the system of additional software security.

All that is needed to create our access point via cmd is just typing on the keyboard and ten good times:

Respect! It's better to turn on the victoria access until the connection so, as we robbed earlier!

Now everything can be earned!
You can change the point by connecting to it with any attachment, which may be a Wi-Fi module (tablet, phone, computer with a special adapter).

Then, having read this article, you are guilty of figuring out how to distribute the Internet from Windows 7 by locale, learn how to use clumsy console commands, as well as IP-addressing and robots with global access services.

This knowledge can help to seriously optimize the robot. additional stability vikoristannya, and also spare the mass of your hour!

Respect! The current operating system is capable of being tolerant of any changes that have been made, so don’t be afraid to try that experiment (within reasonable limits!).
Well, you are still afraid to independently change the configuration of your computer, rather turn to professionals!

Schob at the booth of WiFi, it is neobov'yazkovo to buy a router. You can distribute the Internet to your apartment with a laptop, up to which you can connect an Ethernet cable. I've got instructions for how to work on Windows 7 and older, or if you have XP, don't rush to reinstall the operating system again.

Laptop as a router on an old OS

Come on operating system view Microsoft Distribution to the Internet via WiFi can be organized as well as in-house tools, and third-party utilities. Ale navіscho zaharashchuvati hard drive run programs? On Windows XP, do the following steps:

Select "Start" and navigate to "My Computer".
At the left panel, select "Merezheve otochennya".
Let's move on to the section “Display the connection to the border”.

Click on the shortcut “ Wireless connection”Right button and open the item “Power”.

Let's go for the address "Bezdrotovі Merezі" - "Dodatkovo".
Here select the option “Computer” and confirm your choice.
Press “Add” and enter the data of the measure that is being created (name, password, encryption method) and confirm.
Next, open the “Global” tab and after seeing the IPv4 item, press the “Power” button.
For whomever you want to set an indicator on the item “Check for new IP…” and enter the following data:

IP - 192.168.1.1

Pdmerezhi mask - 255.255.255.0

The distribution has been created, it has only lost the ability to connect to it from other outbuildings, which are located in the zone of the dartless fence. For whom, turn around at the nearest connections and right-click on the local connection, open your power. It is necessary to put an indicator in front of the item “Allow other short-term fencing…”.

Now the distribution of Wifi can be re-functional.

Update to the current OS

You can work similarly with Windows 7. If you want Wi-Fi from a computer or a laptop, you can create a new virtual mesh in the front butt. Rіznitsya is less than in deiki krok.

It is necessary to look to the “Center for Care with Merezhy and Sleepy Access”.
Run “Setting up a new connection…”.

After that, go to “Setting up the “Computer-Computer” wireless mesh” and press the “Next” button.

Like bachite, similar ones. For the new window, enter the name of the entity, the type of encryption, and the password. Save the change and press “Dali”. Here it was no longer enough to stop the nalashtuvannya "Uvіmknut svіlny access ...".

But still not all. So you can connect to WiFi from other outbuildings, turn to the “Center for Care with Merezha and Shared Access” and in the left part of the century you can find the row “Change Additional parameters…”.

Open the menu bar, open the active view on the screenshot of the item:

Ready! But Windows 7 introduces another, more simple and simple way to organize the distribution of WiFi from a computer or a laptop equipped with a droto-free adapter. Tse vikoristannya command line. Find її in the list of all Windows programs and enter with the rights of the administrator (click on the shortcut with the right mouse button and select the appropriate item).

At the end, enter a command like this:

netsh wlan set hostednetwork mode=allow ssid="My new host (at least 8 characters)" key="password"

and press Enter. In order to make a distribution of distribution, and to open the Internet from a laptop, hurry up with the command:

netsh wlan start hostednetwork

I just lost my way to the “Center for the Management of Measures ...” - Vlastivostі Local connection(the same one, like a wire, like the Internet “gets” to the apartment). Open the “Access” tab and check the checkboxes. Now distribution of WiFi pratsyuє.

(Visited 15 590 times, 36 visits today)

Wi-Fi as a way to connect to the Internet allows all gadgets, like a wireless module for a wireless connection, to gain access to the world wide.

Most often, such a need is blamed for the idea of “going into the fence” on the phone. How to organize the distribution of your mobile annex for the help of a computer?

How to distribute Wi-Fi from a computer to a phone - installing a router

Forgive me the most swedish way Organization of distribution - installation of the router. Enough to install the day " fencing cable(internet)" - "router" - "PC" and necessary adjustments. Otherwise, for obvious difficulties, it is recommended to return to the provider.

How to distribute Wi-Fi from a computer to a phone - Hotspot Connectify program

Is it still possible to gain access to the city without having to follow the help of the router? So. Sufficient mother's computer with Wi-Fi access and output at the merezh.

Get it and run Hotspot Installer Connectify - http://www.connectify.me/en/almost-there/.
Zapovnyuєte fields vikna - z'єdnannya, іm'ya merezhі, password access to it.
Emboss "Start Hotspot".
The distribution has begun. Know on your own mobile extension I created a Connectify point, enter the access code and it connects.

An alternative to this program is mHotSpot, My Public.

How to distribute Wi-Fi from a computer to a phone - Windows features

It is also possible to vikoristovuvati nalashtuvannya merezhego sharpening.

Directly in the "Start" menu and click on "Control Panel".
Find the item "Center for keruvannya with a fence and a sleeping access."
You can go to this menu and after the help panel, start by clicking on the icon to connect to the link, and then click on the control center.
At the vіknі, scho vіdkriєtsya, ztaєtesya to the point of establishing a new connection.
After you choose a computer, the computer and emboss “Dali”.
For the new field, set the parameters of the created dimension - for the other fields, enter the name (be it a combination of letters, numbers, or both), set the password and type of security. As a remainder, it is recommended to use WPA2-Personal.
Put a "tick" to save the parameters in the measure and press "Dal" again.
In the new form, activate the secondary access to the measure.

The virtual fence has been created, now the access settings are being denied.

Again, head for the center of keruvannya.
Now, at the left hand column, go to change the parameters of the adapter.
In the form that you see, you need to right-click the mouse on the end of the streaming "dzherel" to the Internet.
Go to the “Zagalni” tab in the “Power” block and check the box next to the field - allow other gadgets to connect to given computer, immediately say “no dart mereveve z'ednannya 2" (new virtual mesh).
Click "OK".
On the left side, select the option to change additional access parameters.
Activate the display line, indicating the most important point.
Save your changes.

Connecting to the created virtual network, the phone cancels the connection to the Internet.

How to distribute Wi-Fi from a computer to a phone - command line wiki

Click on "Command Row" ("Start" - "Vikonati" - cmd).
Next, enter the text "netsh wlan set hosted network mode = allow ssid = My phone wifi key = 11111111 keyUsage = persistent", My phone wifi - the name of the future network, "11111111" - the access code to it.
Open Attachment Manager (Start - Access Panel). You can use the adapter for the mini-port of the virtual network - the creations of new attachments.
Clicking with the right button "Power" of this item, select "Access".
Allow other outbuildings to connect to the border, at the list, which you can see, you know the point is made.
If you check the adapter parameter corrections” (in the center of the check), wait for the appearance of a new icon “Unlocked 2”. The connection status is daily.
To launch, go back to the command line.
Write "netsh wlan start hostednetwork".
Call to the activation of the call, and the icon to change the status to My phone wifi.

We continue a series of lessons about wifi internet. At the first article of the cycle, the world was sorted out from the router’s victories. Today, we know how to distribute the Internet via wifi, so we can try to do without a good lanka and connect two computers together, which work on the operating Windows systems XP and Windows 7.

How to distribute the Internet via wifi?

Let's take a look at the scheme. As earlier, a router was used to access the Internet, but now one of the computers will be on its function. That is, when working with wifi Internet, one computer is guilty of buti constantly turning on. The wifi distribution scheme looks like this:

1. Constantly turning on a PC with a wifi module, connecting a cable to the Internet and a signal that is being distributed.

The key phrase is "constant inclusions", because To connect to the Internet with another computer, it is necessary that the first one is permanently raised - that our router was already well and robbed earlier.

2. Other computer or laptop with wifi module.

Wifi module in modern laptops and netbooks (small laptops) is 99% less than in selected ones. And the axis 3 of the station PC can be a problem. If you didn’t tell me about it at the stage of purchase, then you will have to add additional attachments, which is called a wifi adapter. It is also worth remembering that the main computer, which distributes a signal via wifi to the Internet, is responsible for connecting to the Internet via cable - this is called vichanisinky. standard way. Yogo installation mi not chipaemo.

How to distribute the Internet from a laptop?

After that, as soon as the annex is installed and ready to work, we will try to fix the distribution of the Internet via wifi. We are looking forward to seeing the wifi module - so you win old priy, then run the software that was previously available on the disk and you installed it. I will describe the pictures of Win XP.

Otzhe, we go to " Start > Nalashtuvannya > Merezhevі podklyuchennya- all will work in parallel on both computers. Patch the icons of the dart and the non-dart z'ednan. Click on " Bezdrotovo Merezheve connection right click mouse and emboss note».

After that, in this list (what is shown when clicking on the icon with the right button of the bear) is selected rest item — « power". I work hard to improve our future local measures. For whom, go to the point “ Internet protocol (TCP/IP)»

On the head computer connected to the Internet and distributing yoga via wifi, you can install:

IP addresses: 192.168.0.1

Mask: 255.255.255.0

On another computer like this:

IP addresses: 192.168.0.2

Mask: 255.255.255.0

Default Gateway: 192.168.0.1

The main gateway is the same ip of the first computer, which can be connected to the Internet via cable and through which mi yogo via wifi can be sent to another computer.

Now you need to turn back to the first PC and set up wifi. Zokrema, allow access to the next building. Let's go back to those windows, as shown on the front screen and go to the tab " Dodatkovo". Here we tick the box " Allow other coristuvacha merezhi» And tisnemo OK.

After that, we go to the tab “Bedless meshes” and press “Add” to create a new wifi mesh.

Now respectfully look at the picture below and copy all the settings. Return your respect, that the checkbox for the item “ Key assigned automatically» and at the same time inserted into « Tse direct connection computer-computer". The key is the password for connecting to the wifi Internet, which you can come up with on your own and remember. You will need to run it on another computer.

After that, let's go to the next tab of this window and put a tick on "connect, so that the border is within the radius of the city" - so secure automatic connection to our wifi Windows.

Repeat all the downloads on another computer.

Let's go to the robot once again wifi adapters on both outbuildings, yakі owe our new mesh. As it happened, then at the bottom panel Windows tasks z'appear vidpovidny _indicator.

Now, after that, as we got it together, how to distribute the Internet via wifi, you can rob yourself on the same number of computers and laptops and connect without intermediary to a new outbuilding with the base first computer turned on. If so, not obov'yazkovo the main one is to blame, but the station's desktop PC - distributing the Internet from a laptop also does not add up to everyday difficulties and in this case there is no retail.

Homemade bezdrotovі merezhi - it’s more convenient in our hour, so it’s zavdyaki internal Wi-Fi We can connect, whether it be an extension, equipped with a Wi-Fi module, to the Internet. And how can you not have a router under your hand? How to set up a laptop to distribute Wi-Fi and set it up as an access point?

Again, varto vіdpovisti to increase the power supply, as turbuє more and more expensive laptops: how can a laptop distribute Wi-Fi? The reasoning is simple: so, be it a droto-free adapter that works on receiving and transmitting data. And it means that you can accept the same wireless adapter in the building, as well as distribute the Internet via Wi-Fi.

Update mesh drivers, zokrema, for the Wi-Fi module - it’s better, why fix it.

You can always find out about the availability of software security on the official website of the company-company of your laptop. Krim tsgogo, it is necessary to immediately improve the access to sleep. It's easy to fight.

Find out wifi icon in the area of Windows system updates (the so-called system tray - the area of the right year and date). Click on the pictogram and click on the transition to the center of the keruvannya by means of streaks.

Vіdchinitsya vіkno. Here it is necessary to go to the section “Change additional parameters of sleep access”.

In this way, we opened a menu in which you can set up a double access for in remote outbuildings. Now it's less than enough to increase the sleep access at all points. Immediately skasovuєmo splny access with a password. Press "Zastosuvati".

Everything can now be started without delay until the distribution of Internet via Wi-Fi from a laptop. Three ways to do it:

Through the command line.
Create bezdrotove z'ednannya computer-computer.
Through the program Virtual Router Plus - її it is necessary to install it.

Skin from proponated more options may have its own advantage and nedolіki. Ponad those, fallow in the first place, yakі meti vy resleduєte, varto choose and the way of organizing the distribution.

For example, another option allows you to create a non-rotor network only for computers, smartphones and tablets cannot be connected to it. Such a mesh is recognized only for laptops and netbooks, as well as stationary computers with built-in Wi-Fi modules. Otzhe, let's take a look at all these options.

Setting up distribution at the command line

Get better Wi-Fi sharing less at the command line, launched under the name of the administrator (maє povny access to the system). In Windows 7, starting it is even easier: open the "Start" menu (you can just press Windows key or click on the left icon at the bottom of the levoruch on the working table). Dali at the row for a joke write CMD. Vishche vy pobachite results poshuku. Find out from the requested list of options CMD row. Tse i є command line. Click on it with a bear and select the item "Run as administrator".

In Windows 8, launching the command line as administrator is even easier. For which you can go as far as the key combination +[X]. A splicing menu is displayed. Select the "Command row (administrator)" item from the new one.

Now you need to enter two clumsy commands:

The command for organizing distribution is netsh wlan set hostednetwork mode=allow ssid=My_virtual_Wi-Fi key=12345678 keyUsage=persistent. After writing, press "Enter". Here SSID=My_Virtual_Wi-Fi is worth it. Deputy My_Virtual_Wi-Fi you can write any other name. With this, it is possible to vicorate only the letters of the English alphabet. KEY-12345678 - no password. Instead of numbers 12345678 you can write any other password. Vin can be composed of letters of the English alphabet (including great ones) or numbers.
To start virtual distribution, write netsh wlan start hostednetwork and press Enter.

The day is done. Now you can join a group, whether it's an attachment - smartphones, tablets, other computers and laptops, a TV, a printer, etc. But for now, you have no access to the Internet.

In order to gain access to the global network, it is necessary to make some settings on the computer that is distributing. Nalashtovuetsya tse at the Center for Management of Merezhami. Open the tool and go to the heading "Changing adapter parameters".

Here you can find a connection to the Internet. You can use a cableless or cable connection, as well as a USB modem. Click on the method of connecting to the Internet with the right mouse button and select "Power".

Go to the "Access" tab. Here it is necessary to insert a marker in the row "Allow the connection to the Internet of this computer".

Now let's move on to the item "Connecting a home group". Here you should choose our created mesh (as a rule, it’s called “Dartless mesh 2”). If there is no such row, then just tick the box and press “OK”. All point WiFi access created on a laptop, and all plug-ins can be connected to the Internet.

How to create a Wi-Fi hotspot in Windows 8 from the command line: Video

The creation of a computer-computer

As already mentioned above, Danish way distribution will be provided only for laptops and other computers equipped with a Wi-Fi adapter. Otzhe, launch the Center for carving with merezha. At the branch "Change framing parameters» select the first item, which is called "The establishment of a new connection or a fence."

At the row "Im'ya merezhі" we write the name of the virtual plant. Yogo you need to know independently. Ale zavzhd varto memory, scho im'ya can include only English letters and deaky symbols, such as the lower suffix or a hyphen.

The security type is "WPA2-Personal". The most common type of theft is the type of encryption. Below in the "Security Key" row, enter the password (think up yoga yourself). After that, put a marker in the row "Save the parameters of the measure" and press "Dal".

If you have a successful access, then you can connect to the Internet. Yak tse zrobity, it is described more. Remember that the computer itself is responsible for making connections to the virtual network. And if not, then you simply don’t know about other attachments.

The disadvantage of this method is that only computers can connect to such a measure. Moreover, you cannot receive the Internet through Wi-Fi. In order for such virtual networks to be able to access the Internet, you need a cable connection or a USB modem.

Sharing Wi-Fi from a computer without a router: Video

Victory Virtual Router Plus

The Danish distribution method is another method, like distributing Wi-Fi from a laptop to a phone. Another advantage is that the coristuvachi do not need to set anything up. However, you happen to know the utility on the Internet and get it, and then install it on your computer.

After the first launch of the program, you will need to simply enter the name of the virtual dimension and the password before it (think up yourself). After that, indicate the connection to the Internet, or simply press the “Update” button next to the two opposite arrows.

Everything, after all the merezha will be created and you will be able to win in full. In essence, this program is victorious in budding yourself, like a command line. Ale, the program is much simpler in customization.

Now you can see how to set up a laptop with a Wi-Fi hotspot. Moreover, you know three different ways. Be respectful when setting up global access and distribution, and you have everything.