Programming of telephone exchange panasonic kh tem 824

I think it’s more of a varto from the installation and the connection.
Attach to the wall of the automatic telephone exchange of special difficulties in the warehouse. For the connection of special problems, it is not to blame. It's simple: lilac roses - all internal subscribers, black Russian lines. Two more roses of the "mini-jack" type for the connection of the old music to the alarm system.
Respect that the system phone needs two pairs of darts (4 veins). When connected to your lines, check that the busyness of the line is not programmed, the automatic telephone exchange will take us ahead of the line from the highest port number.

USB sockets are available for setting up the PBX with the help of the KX-TE Maintenance Console software. The COM port can also be tweaked for setting up a PBX, and it can also be tweaked for billing.

After connecting all the lines to the station, it will take a few seconds. After the first launch of the PBX, it will automatically change the dialing mode on the local lines. Apparently, if the PBX receives a DTMF signal, the Panasonic PBX will automatically set the DTMF mode, otherwise the PULSE mode will be set. Also, the PULSE mode will be installed on non-connected lines.

At this stage, the robot will be redirected from the system phone to the pressure of the push buttons. If there is no system phone, then rewiring is done by dialing 81 - 1st line, 82 - 2nd line then. (It is possible that there were no changes in the installed ATS).
UVAGA! Non-practical chi not connected porti gir. Line PBX is automatically switched off. You can turn it on only from the system phone by pushing the push buttons, or once on the PBX booth automatically reverify, and yaksho hіr. line ordered, then turn on її.

Installing the KX-TE Maintenance Console.
The program file is on the disk in the kit with the PBX, although there is no disk, it can be downloaded here.
The installation process has one nuance, it is necessary to correctly select the region according to your PBX. The most common price is RU, but you can also use BX or other. If the regions do not fall, connect to the station, it will be impossible!

Set the password, whatever it is, you need to enter the installer mode in the Maintenance Console.
To connect via USB, you need a driver, after installing the Maintenance Console, you will be prompted to move the driver from the package you specified, then manually install the driver.

Now it is possible to configure the automatic telephone exchange itself.

Starting the Maintenance Console, enter the installer password and the password for connecting to the PBX (locked 1234).
At the first launch of that connection to the PBX Maintenance Console, run the algorithm of the quick setup, describe your needs, only in the very end set the password for connecting to the PBX.

The very setup of the automatic telephone exchange can be divided into spear points.
Pochati varto іz systemic.
1.1 You can set the hour.
1.2 We set the 24-year hour format, which is convenient for us. Like vikoristovuemo old dzherelo music is selected External. Voice mail not victorious

1.3 Numbering plan of the system.

Here you can choose three numbering plans.
1 - internal numbers start from 100 to 199, JACK01-101 JACK02-102 is assigned to the PBX lock. You can assign any number to a jack in the range of 100 to 199. If you recognize numbers, there is one caveat: you cannot assign a jack, which already wins in the system. For example, in order to remember the missions 101 and 102, it is necessary to call the skin from newcomers, tobto. 101 can be assigned to yoga 199 and then 102 can be changed to 101.
2 numbering plan allows you to recognize internal numbers in the range 100-499, you can add numbers to 200 300 400.
3 numbering plan allows to recognize two-digit internal numbers between 10-49.

Another and third numbering plan is to change the feature code. The most frequent victorious function is to override the call, replace the voiced all code 40 and code #40.
Yogo can be forgiven, vikoristovuyuchi second numbering plan.

Dialing the number of the secondary plan confirms the number entered before the table.
For example, 50 vіdpovіdaє perekhoplennyu viklik; 55 confirm dialing 9 (exit at the locality) and give 8495, so you can dial 98495-ХХХ-ХХ-ХХ or you can dial 55ХХХ-ХХ-ХХ.

1.6 Timer.

Automatic repeat of the call - the number of samples and the hour between them.
The hour of turning a week after setting up for the morning that translation.
Hour on the cob of forwarding - if a call forwarding is set in the subscriber, then it will be done in 15 seconds.
Hot line - as installed in the subscriber hot line(automatic dialing of the number when the handset is picked up) won't work after 3 seconds.
The flash timer is capable of transferring calls from analog telephones. Although all analog phones can install a flash duration of no more than 50 - 150 ms., then it is best to change it to 50-180 ms at the station.
In other ways optimal option take 80-1000 ms for the lock.

Trivality of calls.
Change the hour when the place is closed - the subscriber, which is additionally turned on for the skin subscriber
Change the hour of the move when the place is called - the place (the timer is activated at the hour of the transfer of the monthly weekly call to the next local number or mobile number)

1.11 System setup details

Here special respect can be added. View from the service of the faulty line.

Cody gir. The line is occupied by the subscriber, it is constantly tested for the presence of voltage and if it does not work, then it will be serviced.
Once in order to get the hour of the appointed order, the station reverifies the practicality of the line and, as a rule, the line works, enter її back. You can also turn on the line from the system telephone by pressing the redundant buttons.
If you do not have a system phone, it is recommended to disable this function.

Cyclic search for access to CO.
Putting a tick in front of the item, allow you to equalize victoriously on the outgoing link of the Russian lines.

Another point of nalashtuvannya input - output link.

Timchasov modes of work and automatic telephone exchange.
ATS can be used in three timchasov modes, in the skin mode of the station, it can have its own algorithm for adjusting input output calls. Between clock modes you can switch between both manual and automatic mode,

Timing hours can be set in paragraph 1.4

3.1 Line mode

For the dermal mucosal line, you can recognize your addressee.
Zvichayniy – dials are upgraded regularly up to settings 3.2
Entry/Departure. DIL - Weekly messages are assigned to a specific subscriber.
DISA - Autosector; Voice menu system.
UCD - for a group of subscribers, equally splitting calls between subscribers of the group.
Modem - to the internal modem of the administration.
BV - to voice mail.

3.2 Entry/Departure.

Like at point 3.1. the default mode is set, the tweets are processed in the same way up to the table p 3.2.
Usogo 8 tables give 8 mountains to lines, at the skin table you can allow incoming/outgoing calls for the skin subscriber.
Of course, for a skin subscriber, you can put a cut-out on the overhead call.

More in practice, the algorithm will be like this. Day. Come call - call 101 - pass 5 sec - call 101 and 105 - pass 5 sec - call 101;105;110 - pass 5 sec - call 101;105;110;115- ring until someone does not pick up the pipe +110+105+101 In the offence, call all the telephones at once.

Detailed setting CO (Missky lines)

Connected - check the box next to these lines, nothing is connected to them.
Dialing mode - select DTMF value, reverse the outgoing call, also work, hang up, otherwise select pulse dialing.
For the time being, you can get rid of the locks.

7.2 Settings

Zakhist zalishte everything behind the locks, turn it over, chi is sewn up sewn up with the ovnishnіh lines.
Do not enter daily codes without special needs.
DISA mode when the subscriber is busy - you can choose whether it is more convenient for you.
DISA override mode and DISA per day dialing over lockup mode – Auto forwarding.
For DISA dialing allowance, the weekly request is processed according to table 3.2 Entry/Exit
Set the DISA timeout to -0
Hour of DISA clearance after OGM – choose yourself, as you have recorded the notification of the old rate -0
The hour of DISA check-in before re-housing - if the timer has been recorded, then the re-housing will end earlier.
The hour of DISA screening after the overflow - you can also increase it to 40-60 seconds.
Other parameters can be forfeited.

Recorded reminder.
Notifications are recorded from the system phone.
The recording algorithm is as follows.
When installing the pipe, press the Program
dialed 91 - id number 1; 2, ... 8.
We pick up the handset, as soon as a “record” appears on the display, it is dictated, after the store is pressed.
You can confirm the recorded message by dialing Program 92 and that message number.

Describe all the functions, I, obviously, will not, for which report instruction.
Finally, I would like to recommend that you enable Caller ID for internal telephones.
Nadalі tse can help you in case of failures at the robotic PBX, and on phones that support the Caller ID function, the number will be assigned.

Office PBX Panasonic KX-TEM824RU, regular capacity - 6 and 16 internal ports, DISA/OGM, maximum - 8 and 24 internal ports

Analogue hybrid PBX Panasonic KX-TEM824RU is recognized for the security of internal calls in a small organization or a house call, efficient distribution and automatic processing of incoming calls, routing of outgoing calls and the form of calls to calls.

Functions of PBX Panasonic KX-TEM824RU

• Acceptance of the mіskogo viklik be some kind of internal line, have some kind of sequence
• Possibility of building a small link, whether it be an internal line, like with an interchange, or without
• Possibility of redirecting a local call to any domestic line
• Possibility of blocking the exit to the place behind the song numbers (blocking the exit to the "mezhmisto" only
• Direct access to mobile phone function
• Unobstructed internal link
• Conference mode, closed. for the participation of the Russian line
• Displaying incoming and outgoing calls on the system phone
• Checking the weekly
• Exchange of paid calls
• Automatically assign the best (or found) route for outgoing calls (ARS)
• Voice Alert for DISA (OGM) and Fax Automatic Recognition
• Automatic distribution of input calls (UCD)
• Tririval automatic operator
• Mobile mail services for all internal subscribers (option)
• Programming from a computer (USB), behind a modem or a system phone
• Number display calling subscriber(Caller ID) on system displays regular telephones(option)
• SMS routing
• Three modes of work day / night / day
• The mode of overpowering text alerts between internal subscribers
• Ability to connect to a computer with a tariff program
• Connecting to the Voice mail system
• Russian movie support

The third generation of analog PBX Panasonic

PBX Panasonic series KX-TE was expanded in 2005 on the basis of models of the previous generation KX-TA (KX-TA308 and KX-TA616), which are the most popular office PBXs in Russia and other CIS countries (over 100,000 systems are installed).

PBX Panasonic series KX-TE may have a different capacity, and a similar set of functions. The stench is summary with the use of types of analog telephones, faxes, modems, as well as system telephones and Panasonic consoles.

Installed and programmed

Irrespective of the ease of installation and programming of Panasonic PBXs, we recommend entrusting the work to an authorized specialist, who may have a certificate of an Authorized Installer of Panasonic PBXs. In this case, the term of the guarantee on the automatic telephone exchange will increase from one year to three years.

PBX Panasonic KX-TEM824RU is programmed from a computer via USB, a system phone, or via a dial-in modem (a dial-up modem in a PBX). Version update software Automatic telephone exchange, at the time of consumption, is also available through the USB interface.

For an uninterrupted robotic office PBX Panasonic, it is necessary that it be grounded and a small crossover from the lightning protection.

Main characteristics of PBX Panasonic KX-TEM824RU

Introduced a system for exchanging current notifications (BV)

The system for exchanging mobile messages (BV) allows the subscriber, who calls, to remove the message from the subscriber's mail screen or the system's mail screen in the PBX.

Support for the terminal of SMS transmission at the lines of the dart call (requires an additional Caller ID card)

Office PBX Panasonic KX-TEM824RU can rebroadcast incoming calls from the short alert transmission center (SMS) to analogue telephone devices (TA) to receive SMS. SMS at the lines of the dart link is a service that allows you to receive and receive text messages through the telephone network of the infamous wiretap (PSTN). It is recommended to win Panasonic SMS sums.

Viewing the caller ID, which is called, on the SLT (Caller ID additional fee is required)

Office PBX Panasonic KX-TEM824RU can take away the identification information about the subscriber (phone numbers and names of subscribers who call) at calls, which can be found on calling (CO) lines. This information can be displayed on the TA displays, which support the identification of the subscriber, as well as on the displays of system telephones (ST) when ringing is removed.

The service "Automation operator-telephonist" (AA) with three equals

The service "Automation operator-telephonist" three times allows the subscriber, who calls, to dial a number that adds up to one digit (AA number for direct access to system resources), accessing the system calls in the current DISA system connections (OGM) on three, three, and call the required subscriber automatically.

Programming on a computer

Change system settings It is possible for the help of a PC and the Panasonic KX-TE Maintenance Console software, as well as for the help of ST. The firmware of the PBX Panasonic KX-TEM824RU can be changed via the last interface (RS-232C port) or the USB port for the help of the KX-TE Maintenance Console software.

Shvidke nalashtuvannya

The basic parameters of the PBX Panasonic KX-TEM824RU, for example, "Auto-configuration type CO" or "Settings for the edge", can be programmed when first connected to the PBX from a PC on which the KX-TE Maintenance Console security software is installed.

Improved hybrid system

PBX Panasonic KX-TEM824RU supports the connection of ST, direct access consoles (DSS) and analog add-ons such as TA, facsimile machines, wireless telephones and data terminals.

Expansion capacity PBX Panasonic KX-TEM824RU

The location of Panasonic automatic telephone exchanges is growing with the path of installing additional boards.

An important feature of the PBX Panasonic is the name of the hybrid line for connecting internal subscribers.

The power of "hybridity" means that you can connect a system phone to the line, or a normal phone or a fax. In addition, to the hybrid line, you can connect a system phone in parallel, and, for example, a wireless phone to the DECT standard. The vast number of telephones, including parallel ones, connected to the PBX Panasonic KX-TEM824 is not guilty of overshooting 40.

Rozpodіl input calls in PBX Panasonic KX-TEM824RU

PBX Panasonic KX-TEM824RU distributes input tweets according to different algorithms according to the specifics of the company's business. Weekly links can be assigned to one subscriber or to a group of subscribers, and they can be divided in the middle of the group equally or according to other principles. When an automatic attendant (DISA function) can process up to two calls at once, vicorate three different menu moves, and pronounce to the subscriber, call, call with different subscribers and the company's spokesmen by dialing the additional number in the tone mode. Input facsimile calls are automatically recognized and can be forwarded to a fax.

Wiklik, which is sent to the phone of the internal subscriber of the PBX, can be switched over from the other internal phone.

Algorithms for splitting calls can be changed automatically, depending on the hour of the day (day, night, break). At non-working hours, the calls should be manually forwarded to the moving mail (a fee for moving messages is required), after pressing the subscriber to call, the ability to record the moving message in Postal screenshot whether it be an internal subscriber of the PBX or to the mailbox of the company.

Office PBX Panasonic KX-TEM824RU can assign the number of the subscriber that calls,* and send this information not only to the system telephones, but also to all internal subscribers who can assign telephones with the function of assigning a Caller ID number (required). If the subscriber's number is saved in the PBX's memory, the phone's display will show that name.

Caller ID information (20 remaining numbers) is saved in the logs of incoming calls to system telephones.

* Caller ID ("digital ABN") service may be assigned by the telephone company-operator.

Routing of external calls in PBX Panasonic KX-TEM824RU

Access to call lines, as well as the right to receive an intermediary call, can be regulated according to the category of subscribers.

If the company is based on the services of a dekilkoh operator in an international connection, office PBX Panasonic KX-TEM824RU automatically collects cheap fare, in the fall on the day of the day and the hour of the day, and change the number dialed by the internal subscriber (add the code or read out the digits from the number).

Office PBX Panasonic KX-TEM824RU control of many telephone lines, to which they are connected, it can block access to the line for internal subscribers in case of an accident in telephone line, and then I will automatically re-enable access after the failures have been fixed.

Internal call in PBX Panasonic KX-TEM824RU

Up to five subscribers of the PBX Panasonic KX-TEM824RU (including up to two callers) can make a conference call in the mode.

An internal subscriber can choose to hear a dial tone, vicorist speakers of system telephones, or call a telephone number, connect to a PBX.

To PBX Panasonic KX-TEM824RU you can connect intercoms and electromechanical door locks, which allows you to talk to the guest without going to the door, and then open the lock by pressing a few buttons on your phone. Oskіlki be-like an internal subscriber can call on the intercom, you can win it like an intercom.

Movna post

The system fee of movnih voіdomlen zberіgaє up to 125 voіdomlen zagalny trivalіsty until one year and service up to two weeks at a time. The skin of an internal subscriber can make a mail screen, write down an individual call and forward it to the incoming calls.

Control of varietal value of roses

Detailed information about all inputs and weekends is accumulated in the PBX memory (up to 10,000 entries) and transferred to the computer via the RS-232C interface, for further analysis and analysis of the phone numbers. PBX Panasonic KX-TEM824RU collects the following information about the weekly call: date, hour, internal subscriber number, number old line, dialing number, phone number, approximate phone number, Caller ID (at the time of the input call).

Approximate variance of relocation and repayment in real time on the basis of tariff information entered into the memory of the automatic telephone exchange. The flow rate of the call is displayed at the hour of the call on the display of the system phone. A skin internal subscriber may have a limit of vitrates installed, and for this reason, the call may be interrupted. This function allows the bankers of small hotels to take a deposit for the international call from the guests.

Main unit

The basic capacity of the PBX Panasonic KX-TEM824 is 6 external (CO) lines and 16 internal lines. The system supports the connection of Panasonic system telephones (PT) and analog devices, such as analog telephone equipment (TA), facsimile equipment and data terminals.

To expand the possibilities, PBX Panasonic KX-TEM824 can be equipped additive components abo koristuvachem, what to try outbuildings; It can be, for example, electromechanical door locks, bells and whistles and bells of audio signals, for example, a CD player or a radio receiver.

Zagalny description of PBX Panasonic KX-TEM824

Control bus: Power bus (16 bit, 24 MHz)
Switching: CMOS matrix switcher from a spacious floor
Power input parameters: 100 – 240 V AC, 1.5 – 0.75 A, 50 Hz / 60 Hz
External battery: +24V DC (+12V DC x 2)
The maximum allowable interruption of power supply is 300 ms. (without using backup batteries)
Trivality of saving in memory: 7 years
Dial a number

• Ringing (CO) line: Impulse (10 imp./s, 20 imp./s) or tone (DTMF)
• Internal line: Impulse (10 imp./s, 20 imp./s) or tone (DTMF)

Number of one-hour internal days: 4
Dial conversion: Pulse-DTMF
Call frequency: 20 Hz / 25 Hz (per choice)
Climatic wash for the hour of operation

• Temperature: 0°C - 40°C
• Water content: 10% - 90% (non-condensing)

Boundary number of invited participants in a conference call: 2
Background music on morning (MOH): 1 port. Selection of background music for mornings: internal / external / tone signal
Alert about a loud call

• Interior: 1
• Calls: 1 port

Serial interface port

• RS-232C: 1
• USB1.1:1

TA internal line cable

• 1-pair wire (T, R)
• ST 2-pair wire (T, R, H, L)
• Direct Access Console 1-Pair Wire (H, L)

Rosmіri: 368 mm (width) × 284 mm (height) × 102 mm (dozhina)
Weight (refurbished): approx. 3.5 kg

Characteristics of PBX Panasonic KX-TEM824

Opir to the train of the endian possession

• ST: 40 Ω
• TA: 600 Ω, including lancet device
• Intercom: 20 Ω

Minimum opir coil: 15000 Ω (no less)
Maximum number of terminals per line

• 1 ST or TA with standard connection
• 1 ST and 1 SLT with parallel connection

Cyclic voltage: 75 Vrms at 20 Hz / 25 Hz, fallow voltage
Opir to a loop of zvnіshny (CO) lines: 1600 Ω (max.)
Trivality of the "flash"/repeat call signal (reset call): 24 ms. – 2032 ms.
Boundary strum at the lantsyugu electromechanical door lock: 30 V constant strum/ 125 V AC, max 3 A
Kіntsevy opіr I'll add a loudspeaker alarm: 600 Ω
Ending Opir Dzherel Background Music at Utrimann: 10 000 Ω

System capacity

Calling (CO) lines: 6
Internal lines: 16
The system is fully completed

• Calling (CO) lines: 8
• Internal lines: 24

Maximum number of boards and terminal attachments

ST and TA: 40
8-Port Hybrid Internal Line Card with Three Analog CO Line Ports: -
8-port analog internal line card with 2 analog external (CO) line ports: 1
8-port analog extension card: 1
DISA/UCD OGM Expansion Card: 1
4-port intercom card: 1
3-port Caller ID Card (Caller ID FSK and DTMF): 3
2-channel external alarm card: 1
Intercom: 4
Electromechanical door lock: 4
Notification number: 1
Background music on morning (MOH): 1
Direct access console: 2

System data

Operator: 1
Number dialed from system dialer: 100
Number dialing in one push: 24 per internal subscriber (ST)
Number dialing from subscriber's dialer: 10 per internal subscriber
Parking area for calls: 10
Daytime notice: 6
Service category for Access Exchange (TRS): 5
Group of internal subscribers: 8
Point of contact: 8 per internal subscriber
Alerts for a wake-up system for exchanging instant alerts: 125 alerts (total 60 minutes)

The package of delivery of PBX Panasonic KX-TEM824 includes:

• Technical documentation: Installation guide / Function guide / Koristuvach guide / Commissioning / Programming tables, Short help for system phone, Short guide for analog phone, Visual Setup Guide (English only)
• KX-TE Maintenance Console
• USB driver
• 1 power cord
• 3 screws and 3 washers (for wall mounting)
• 1 cable tie
• 1 socket for an alarm add-on and 1 socket for the audio signal socket
• 1 stitch

Instructions for commissioning the office mini-ATS Panasonic KX-TEM824.
Preparation before installation. Installed. Launch of an improved hybrid system. Programming on a computer Programming on a telephone.
Expand zip file 1138 KB, PDF format.

Helper with the functions of the hybrid mini-ATS Panasonic KX-TEM824.
Call service functions. Configuration and administration of the system. Instructions for programming. Addendum.
Expand file 3176 KB, PDF.

Instructions for installing mini-ATS Panasonic KX-TEM824.
System components. Wash for hopeful and safe operation. Description of the system. Installed. Help with KX-TE Maintenance Console. Poshuk that usunennya inaccuracies.
Expand zip file 2044 KB, PDF.

Programming tables for the advanced hybrid system KX-TEM824.
Expand file 238 KB excel format(xls).

Operating instructions. Posіbnik koristuvach mini-ATS KX-TEM824.
Operation. Functions of the operator/manager. Setting up a telephone set and UVATS.
Expand zip file 3356 KB, PDF.

A short help for analog phone koristuvach.
Card for koristuvach analog phone.
Expand the file 13KB format Excel (xls).

A short help for the koristuvach of the system phone.
Card for koristuvach system phone.
Expand the file 26KB format Excel (xls).

Manual (Quick Reference PT) for PBX Panasonic KX-TEM824
Type: WinRAR archive / Format: Microsoft Excel/ Rozmir: 24.56 Kb

System telephones provide the most direct access to the functions of the PBX Panasonic KX-TEM824 and give the correct information about the busy lines in the real time mode.