DragonFly: Installed and first upgraded. dragonfly

The Ukrainian-popular terminology has the same understanding - Game Changing Weapon. Axis, for example, on the cob of a century you breed horses, sharpen your caps and plan the logistics of fodder delivery. And then a tank appears, which will rule the entire cavalry science for retirement. An hour passes, and on the cob of the advancing century, a “javelin” nullifies the mysticism of tank strategy. Tse i є "zbroya, yak zminyuє gri rules." Axis so in Hi-Fi-audio for a long time was a realm with three-overhead CD-transports, until it was bombed by critical modules of computer audio.

Prior to the first Audioquest DragonFly, portable combos based on DACs/pidsiluvacs were already used, but the ideas were rejected by subtleties. Either the dimensions are like that of a pack of powdered powder, or the food is served - there are few darts on the table for a laptop, headphones and active acoustics. Audioquest DragonFly looked like a flash drive from the exit to the mini-jack. Asynchronous USB, two clacks at frequencies, multiples of 44.1 and 48 kHz - such, Gordon Rankin (the engineer, founder of Wavelenth Audio, who was the first to develop light audio asynchronous USB transmission) - all right and nothing wrong!

Successful concept of Audioquest swindling the masses of the people. A lot of koristuvachivs tried to attach their “grandmothers” through adapters to smartphones. It turned out - with a great success. On the right, in the fact that the very same iPhone was supposed to run old priy through the company's exchange in energy supply. That’s why the best ones went to the end and included in the scheme a USB-hub with life, so that the system still worked. Ale, obviously, everything looked not so appetizing.

The 1.5 Black model is up to the third generation of DragonFly, in line with the energy standards of smartphones. Now, through the Apple Camera Kit or USB OTG adapter for Android, you can perform an intense Hi-Fi upgrade to your dialers and tablets. Let's take a look at the features in order.

Although it seems that DragonFly guesses a flash drive, taking 1.5 Black by hand, you understand that in the middle it is more serious: the capacity of the troch module is more than 20 grams. View front version 1.2 it is not easy to look at the novelty - behind an anodized USB socket. The USB microcontroller was replaced by a Texas Instruments TAS1020B Microchip PIC32MX. With this method, the output voltage is reduced from 1.8 to 1.2 Volts. How far away practice has shown, for the most important earphones of which value hangs over the head.

The Saber DAC model has been changed from ESS 9023 to ESS 9010. Like the previous models, the Black 1.5's volume control is analog. The regulator itself is not transferred to the case - everything is queried in the middle through the volume control in the computer or gadgets. In the road version 1.5 Red, the volume control is already digital, and the second DAC with more high characteristics is ESS 9016, and the voltage of 2.1 at the output allows you to drive tight 600-ohm headphones.

Pristroy, like before, I can 24 bit / 96 kHz and the same indication on the case: 44.1 kHz - green "grandmother", 48 kHz - blue, 88.2 kHz - amber and 96 kHz - violet. Tim is not less, priymach allows you to take more high frequencies sampling, which is automatically downsampled to 96 kHz. Before speech, the very presence of a different indication is not a toy, but an optional option. Rich at the time, at the interface of the computer audio player, hang, ring, a sprat of signal output options. The standard soundcard for locking, for example, may require downsampling of audio of a high output up to 48 kHz, and the adjustment of the player can be saved when changing the display of a larger progressive input. With DragonFly, run this process under control and make sure that the correct signal strength is received by the DAC. ASIO-drivers for DragonFly are not forwarded, but you don’t need to install anything, just add some attachments to the roses - and you’re all set. With audio programs Windows environments Vіn works for the equivalent protocols WASAPI or Kernel Stream.

Vimiryuvannya signal for equal 0 dB at a frequency of 1 kHz did not allow reaching the statements of the virobnik 1.2 volts. Vtіm, for any headphones, krim high-resistance models, go out and so extremely loudly. It's a shame that the current version of the DragonFly audio output is too low for the 10 Ohm sign. To guarantee the frequency distortion of the frequency response and the effect, the impedance of the output and the drive may differ by five times at least. Virobniki players do not point to this important parameter, and it must be done independently, focusing on the drop in voltage with and without pressure. For example, for my working laptop, set the impedance to 50 ohms, so when low-ohm is connected reinforcing headphones the sound fades, becomes rough. In DragonFly, dissimilarity is disabled.

Navit untrained listener can appreciate the difference between the Audioquest sound and the regular audio clap in the laptop, and you will say “wow!”. Saber processors can be used in such small implementations. The sound is swishy and translucent, the leathery note of carbue croque: like a touch of smearing. Midbass strikes like a boxer in the ring, and the stage is expanded from space. De facto, a similar archetype is dominating today among the most important number of implementations on Saber (and even richer). How do I place myself especially in what handwriting? Super sensible.

On the one hand, such a presentation is less significant than a neophyte, to which he heard junk. Tsey DAC without any doubt want to zavzhdi mother under the hand in the minds of the sexes. All the same, it’s not like the only one dzherelo in the booth! At the same time, CD-programmers have been singling out the sound of LP-programmers, and reviewers have also described the alusions with an analog sound. Ale tsi hours, it seems, behind. So today, on the acoustic phonograms of Viconan Saber, I wanted more lively timbres and wickedness of delivery.

It is impossible to call DragonFly a well-known neutral dzherel. Vіn all the same evokes its own order of the day in the real middle and basses. The sound at the ear is accepted even more clean and dynamic, but the impulse appears and recognizes the mitt, does not vibrate the tangle of sounds that make up the meloman fabric. Today's mainstream genres, or clicks'n'cuts, like Audioquest DragonFly, christen the rhythmic line with plotter precision. Ale, if you don’t want to rip the wine, especially if there is a chance to skip there, it will happen badly: clattering and wheezing will be presented to the forced look. And even though when working with headphones, the features are not so memorable, then when connected to a stationary audio system, the sound of the ear will change, that the classic great DACs will fight.

To say, Gordon Rankin first of all wanted to win over the Wolfson, and then later he was inspired by them. In principle, and I understood why: the Saber architecture is more promising for an upgrade. Starting from the third generation of DragonFly, it will be possible to update the firmware - and there, better for everything, it is possible to correct the sound, add a DSD support, and maybe even MQA. For now, under the curtain, one more watchful.

You already know everything about the support of smartphones with the new DragonFly. But how do you know that now you can get honest high-res audio from the antediluvian iPhone “four” through a 30-pin rose? I’ve lost my respect, if, when listening through the Onkyo app, the “grandmother” changed her color to Burshtin. 88 kHz sampling? Stars? It appears that the upsampling function was installed in the soft player, which was heard to increase the base 44 kHz input. In principle, highrezi in iOS add-ons you can listen to it earlier - both through Onkyo, and through the FLAC player. Ale, glad about it, it was not rich. The space is decently occupied, and when the iOS audio codecs were introduced, they lowered the rate to 16/44 using the trunking method. Tobto stupidly cut off all the zaives. As a result, such a high-rise sound instantly sounds higher, lower file 16/44, sounding from science with the correct reduction in discreteness and the included dithering option.

Now it doesn't matter what rose you win at the link with Audioquest DragonFly - Lightning or 30 pins, Apple's exchange doesn't hurt anything. HD-audio in primordial viljadі viljadі on zvnіshnіsnі DAC, and you'll be able to assess the belonging of the Game Changing Weapon far, far from the booth.

Price: 9310 rubles

Passport data

DAC: 32 bit, Saber ESS 9010

Maximum operating sampling rate: 24 bit/96 kHz

Microcontroller: 32 bit, Microchip PIC32MX

Maximum audio output voltage: 1.2V

Wisdom: Windows Vista/7/8.1/10; Apple OSX; Linux; Apple iOS(5 and higher); Android (4.1 and higher)

Upgrade: through AudioQuest's Desktop Manager Application(At the time of publication, available in retail)

Dimensions: 12x19x62 mm

Description and equipment

New 2015! Dual Channel Sonar/Chartplotter w/ Wi-Fi: CHIRP Fishfinder Structural CHIRP DownVision™ (Structural mode with high-definition sonar detail molding), GPS Receiver, Wi-Fi Controller, 5" (127mm) screen. MAP Reader, Navionics , LightCharts Includes CPT-DVS transducer.

CHRIP DownVision™ technology is simply a Short Structure Sounder.

CHIRP DownVision™ technology ensures that the underwater light is circulated with unique clarity and photorealism. In view of the most significant structural fish finders, the CHIRP DownVision™ mode in the Dragonfly fish finders miraculously works both on water holes with small depths, and for depths up to 180 meters, improving the signal from the bottom at sea level.

Vіdmіnna Yakіst Image

The Dragonfly echo sounder is equipped with a RK screen, created by Optical Bonding technology. The technology of Optical Bonding simplifies the reliability and maintains the term of service to the screen in case of good weather conditions, as well as ensures the highest quality of the image for any kind of bright minds. Zavdyaki tsomu at the fittings does not fog up the screen, miraculous visibility is ensured, like in a bright sleepy light, so in the night hour, and the image can be brightly colored and high contrast.

Wireless image transmission to a smartphone or tablet computer Raymarine Dragonfly WiFish

Models of Dragonfly Pro fish finders, which are equipped with a Wi-Fi module, can transfer images to a smartphone or tablet computer at the real hour.

Connect your phone or tablet computer to the fish finder via Wi-Fi, and the image of the fish finder will be displayed on the screen of the mobile attachment. For robotic fish finder mobile extension The cost-free mobile add-on Wi-Fish is won.

*Mobile add-on Wi-Fish can be installed on outbuildings with an operating room iOS system version 7 or Android version 4.0 is better.

In the program of transferring the possibility of increasing the pause, scaling the image, scrolling the image history back and saving the image of the screen, I will add it to the memory.

Wickery of Detailed Maps

Models with a built-in GPS receiver support the work with three cartography standards:

C-MAP by Jeppesen

Light House Charts - official format Raymarine

Vіdmіnіnії tekhnologiї CHIRP vіd traditіynіh tekhnologii

In front of traditional fishfinders that vibrate the skin pulse with a fixed frequency, Dragonfly fishfinders, when victorious, use CHIRP technology to ensure the vibrance of signals from the wide-frequency spectrum in the skin pulse, which can help the water. As a result of changing the CHIRP technology, the detail and reliability of the image captured by the echo sounder is significantly increased.

Two channels CHIRP - Two echo sounders in one

The Dragonfly 5 DVS model has two independent echolocation modes with CHIRP technology, which work in different frequency ranges:

- CHIRP DownVision™ Mode- Structural mode for detailed formation of echolocation images of high clarity;

- Sonar CHIRP Mode- take care of more high detail and designation of the rib.

Zruchne

The Dragonfly 5 fish finder is equipped with a compact, hinged display mount that ensures easy installation sonar practical be de.

The special case of the fish finder is compatible with the standards of water resistance IPX6 and IPX7.

Vіdminnі features:

• photorealistic image clarity of the bottom structure based on CHIRP DownVision™ technology
• CHIRP fish finder and ultrasonic CHIRP echo sounder ensure that the bottom structure and ribs are visible high-rise building
• Double efficient CHIRP sensor
• Precise temperature sensor, built-in sensor.
• vbudovaniya GPS priymach, with the technology of swedish roztashuvannya.
• supporting Navionics, SMAP cartography
• completely simple display control interface, simple display display
• even brighter threaded screen on Optical Bonding technology ensures high brightness and contrast of the image with bright sleepy light, maximum readability of the screen for any weather minds.
• swivel and frail bracket іz the possibility of a simple znyatya display
• Wake up GPS module

Technical characteristics:

Complete set:

Product code: 723193791653

tuotesivu_esittelykuva

Which echo sounder should I use?

A lot of fishermen rozmirkovuyut, what kind of fish finder should be used for your needs.

The Happy Angler store experts have taken a few steps to help you find the best fish finder or fish finder-chartplotter so that fishing becomes more efficient.

New additions to the popular Raymarine Dragonfly series! Now you can get high technology for a great price! Dragonfly PRO Fishfinders are equipped with a dual-channel CHIRP DownVision fishfinder and WiFi support, so you can transfer echolocation images to your smartphone or tablet!

CHIRP DownVision technology from Raymarine has been rewarded to promote fishing flooring to a clear image of the underwater world, which has rightfully been awarded the name Visionality! Watch all the intensity and clarity of Visionality technology and take a fresh look at the underwater world under your body. Photographically more accurate bottom contouring with additional CHIRP DownVision™ technology, making it easier to see a single fish from a school. Sensitive temperature sensor in wake-up at the echolocation sensor. Dragonfly 4 PRO is equipped with a traditional CHIRP fish finder and a CHIRP DownVision fish finder.

The Dragonfly fishfinders are equipped with the CHIRP wide-range technology, which can be called a strobok in the future. For the help of wide-angle CHIRP technology, more echolocation signals should be near the water, so Dragonfly can better recognize objects, know more ribs with brand-name accuracy to create the relief of underwater light.

Display for any weather - a uniquely bright display does not block the worst weather! Reading the image on the Dragonflyn LCD display is no matter how cool. A compact system of fastening on hinges and the possibility of adding additional hinges of a fastening system (for example, RAM).

Dragonfly PRO models are equipped with Wi-Fi. Fishermen can seamlessly capture Dragonfly echolocation images directly to their smartphone or tablet screen with the help of Raymarine Wi-Fish™. With the Wi-Fish add-on, you can view the Dragonfly echolocation image on your arm! The Wi-Fish program has the ability to enable pauses, image scaling, scrolling the image history back and sharing with friends shortening images. Zavantage costless supplement Wi-Fish to your smartphone or tablet, iOS or Android (WiFi support, iOS7 or Android 4.0 or newer) and convert your attachment to the additional display of the Dragonfly PRO fish finder-chartplotter!

Display size 5"
Separate building 800 x 480, WQVGA display
CHIRP echolocation and CHIRP DownVision
Addendum Wi-Fish
WiFi
microSD card slot x 1
Map support: Navionics, C-MAP 4D
Waterproof standard: IPX 6 and IPX 7
Movies: Russian, English, Finnish, Swedish, Bulgarian, Danish, French, Icelandic, Korean, Portuguese, Chinese, Dutch, German, Italian, Norwegian, Turkish, Arabic, Croatian, Greek, Japanese, Polish, Spanish

Complete set:
Dragonfly 5 PRO
Transom sensor CPT-DVS, cable length 6 m
Platform for fixing
Attachment for transom sensor

tuotesivu_toimitus

Untitled Document

Delivery method

Delivery is charged for the help of EMS (Express Mail Service). The goods are always delivered to your home. The courier informs the client about the arrival of the parcel and delivers it to the specified address. At the time of the addressee's time of delivery, the courier will inform you that the parcel can be picked up from the first post office. The client is responsible for picking up the prayer postal delivery stretching 14 days. In a different direction, the spell will be rotated Happy Angler.

Delivery rate

The delivery rate of all orders is 1000 rubles independently from the bag.

I acquired the first echo sounder long ago, and may soon see how the chauvin and dvigun appeared. Starting from the simplest and found the cheapest b/w piranha from Hummingbird. I didn’t check the difference between the depths and the differences in the relief, and I ran into a solid five. For a long time, the won served me with that truth, the docks did not die in the presence of the waters falling into the middle. Todi th received a notice about the purchase of a new fish finder. And the shards of the setting and pidhіd to fishing for the past hour have already changed for me, I began to look at the bigger rigging. I already wanted to not just catch fish, but rather to understand why it’s right here and now. Bachiti the structure of the bottom, accurately signify the presence of any underwater anomalies (writhing, stones, thinning), and know the accumulation of feed ribeye.

І axis began flour selection. As a matter of fact, you need to know the cost of the shortest possible price/value ratio and your budget. The result was selected for the Lowrance Mark-5x DSI fish finder. Morally, I'm ready for more expensive models, having looked at the options for fish finders with GPS, and having read the joys on the forums, having forgiven me and take a simple model. And I was smitten outside rozcharuvannya. Friends, do not step on my rake! If you have the opportunity to take a good color echo sounder from the GPS, take yoga and make life better. Such hostility, that people, yakі handed out to the audience on the forums, do not know what to talk about stench. Below I will sort it out point by point and show why it is so, on the butt of my new colored Raymarine Dragonfly 6 with a built-in GPS receiver.

color screen

Significantly more informative than black and white. I am repeatedly battling the hardness that the picture of a bright, drowsy day on the color screen of the echo sounder glows, but not on the black and white one. Maybe for some of the old fish finders it would be so, but at the same time to roar the wonderful color screens, as they do not shine on the sun, and the information content of the color screen is richly rich. Lower than the little ones from my fish finder on a sleepy day. I specially selected the photo from the fish bottom. And for example, there will be a video, take a fish finder in sony weather, you yourself will dance, as everything is miraculously visible, moreover, be a kind of kut to the screen of the fish finder.

Expand the screen

Here everyone understood - what is more beautiful for them. Dragonfly 6 has a 5.7 inch screen. I was worried that the echo sounder might appear too large for a PVC chute with a size of 340, but no, there are no problems with the size, you can take a 7 inch brother. Behind the dimensions, the headstock 6 may not look like my Mark-5x DSI lorry from a black-and-white screen. Ale, to create a small color screen is all one more beautiful, the bottom is a great black and white one, so when choosing between a 5-inch b/w screen and a 4-inch color screen, choose colors.

Wake up GPS

I've learned the mirroring, it's better to get a GPS device, less to overpay for a fish finder from the GPS. If you choose to go for mushrooms, then so be it. And the axis on the ribalts in the wake of the GPS is even more reliable than the river. You can go to the previously designated point without any problems with the best navigator, and you can only indicate a promising point on the passed terrain only as long as GPS is connected to the echo sounder. Skіlki razіv I bulo - for an hour I’ll ask for a month, or I’ll go to the fish finder in a promising place (a small navel, a snag, a hole), I’m zupinyayus, I turn around and I can’t know yoga suddenly. Whenever a GPS receiver is used in the fish finder, you can forget about this problem.

life

When I first tried the Lowrance Mark-5x DSI, I was shocked by the battery. Eating, which I got on the first season with a meal, went for a different day of fishing with lorik. When switching to Dragonfly 6, I got some of the same, but everything went well, and I use the same 5 amp-year li-ion battery, I change it for the last day of fishing, as it was with Lawrence. Subjectively, I didn’t mention what kind of retail space I have, I want my grandmother to have a larger color screen, GPS and a bigger echolocation system.

Visnovok is like that. How do you take a fish finder from modern scanning systems such as dsi, downVu, DownVision or so. cook strained battery. Independently, in view of the difference in the color of the screen, the echo sounder calmed down a little energy.

Now about the Raymarine Dragonfly 6 fish finder itself

Foot characteristics

• Screen with a diagonal of 5.7 inches (14.5 cm), 640x480 pixels.
• Yaskrave LED lighting for economical energy saving.
• CHIRP DownVision™ structural fish finder.
• Riboshukovy CHIRP echo sounder.
• Wake up GPS receiver.

The complete set is special - a screen, a rotary screen fastening, a sensor, a sensor fastening and all kinds of wiring, clamps, screws. Everything is needed, there is nothing zayvogo, as in other fish finders, as if they were in me to the last.
I immediately attach the sensor to the respect of the great expansion. It’s wonderful, but then we understand that I don’t create everyday problems. The nature of the fastening of the sensor is covered with insurance against impact. Zusilla, if the sensor is visible, you can adjust it with a bolt. I had a sensor on the back of my head when I went to the glider when I went to the glider, so I had to pull the adjusting bolt a little.

First attack after switching on

• Dark screen and image. The screen is on the sun, I already wrote about it.
• Simple and intelligent interface. A total of 3 buttons and a joystick, easy to pick up using the tick method. Before the first contest, I glanced at the instructions of the shvidko and diagonally. Forgotten by some button of the screen mode to change.
• The large screen allows you to visualize simultaneously two of three possible modes of the fish finder - navigator, fish sounder, structural echo sounder.

The first two fishing trips I just found myself enjoying with pictures and periodically lazily poking at the fish finder. After whom it came to light that the instructions should still be read varto, in order to systematize knowledge and understand all the possibilities of this miracle.

Also, the top brown functions and the upgrade of the echo sounder, which I managed to evaluate for the first and second months of the competition.

1. Icon of a ticking point in the navigator in the sonar mode. Let’s say we’re looking for a promising place, on the screen there’s a picture of a cicada – a local hole up to 7 meters with a gentle relief of 4-5 meters, a bachimo riba and a boat with a hard bottom at the entrance to the hole. The hardness of the bottom can be judged by the tovshchina of the red line - how thin it is, how hard the soil is at the bottom. Before speech, respectful fishermen should remember that the fish is concentrated on its own distance, the bottom is harder.

Garazd, turning to the head - we already slipped through the hole and I want to quickly add a twist to the riddle about the echo sounder. For this, it’s possible to press on the central control joystick, the screen scrolls and a cross appears on the new one, which you can use the same joystick to move to the screen dot. We move the cross to our hole, press the joystick button and insert a spot at the echo sounder memory. Ready. We can go far away to search for promising places, or we can manually put ourselves in order from the designated point and fish a hole.

2. Lines of depth. The stink of the stench is wicked behind the locks. In the photo, there is more stench in the sight of horizontal dotted males. Behind them, you can also manually evaluate the drops in relief. In the photograph, a hole from 4.5 to 7 meters without lines would have made it easier to estimate the difference in depths. To highlight them in the fishfinder program menu, you need to select Display Options, then Depth Lines.

3. Straight rush. Tse dodatkova green line, as if it directly shows the ruin of your chin. It also helps to more accurately enter the previously designated point. To select this option in the menu of the program card, choose Customize the card, Vector to the COG rate.

4. Change the position of the ship on the screen. Behind the lock, the fish finder will show the patch in the center of the screen. Tse is too easy, because if we are rushing on the chovni, we want to bachiti those who are in front of the course of the rush, and not behind that on the sides. I have the same switching mode in my fish finder, so in the photo you can see the icon on the left upper codend, not in the center of the card. For inclusion in the menu of the program map, select Adjustment of the map, Position of the vessel, Position.

5. Record route. Cicava function, like a line on the screen of passing the route, as well as recording the indication of the depth of the memory, an attachment for a distant study. The function of dividing the route can be even more corny on the watershed, if the orientation on the water is difficult, and on the screen of the echo sounder we have a lot of space, which we passed earlier. To add a record to the route in the map menu, you need to select Navigation and Start track record.

5. Surface cleanliness. Temporary adjustment is possible in all echo sounders, it picks up noise from the upper part of the screen on the surface of the water. In my opinion, I can’t turn it on for a depth of less than two meters. If the depth is greater, then the qi lines in the mountains are not respected. Recognized for the lockdown automatic mode, If you need 20% equal to choke the override, then set the manual mode, then set the equalizer close to 40%, it is good to clean up the override from the surface.

The axis of the main speech, yakі me zdalis tsіkavimy for the second month of victorious echo sounder. Already at once I will understand that I have added to the great part of the hour GPS receiver, and not to different sonar modes. Surely, because earlier I didn’t have a navigator for fishing, but fish finders, and now the picture just doesn’t go in the same line as Dragonfly shows.

Photo and video of ribeye on a fish finder

In the video, I am walking over the pit, in the yak a bunch of white ribey was already huddled before the winter. The pit is to milk the wuzka zavglibshki 5-6 meters. At the 15th second, you can see how the fish finder is actually piercing the bottom through the arch of the high ridge of the rib.

Podbag

Such an attachment, like the Raymarine Dragonfly 6, will become an indispensable helper in the first season when fishing on the water. Vbudovaniya GPS, vіdminnі riboshukovі and structural modes of the echosounder will help to better orientate on the great expanse of water, know the accumulation of riba and like cicada bottom anomalies. When fishing on the river, everything is insanely, even more colorful functions, but on extreme fishing, I caught myself thinking that for more than an hour I marvel at the screen of the echo sounder, lower on all sides. Aje river, on the vіdmіnu vіd vіd vіd dam, miraculously read just eyes. Standing on a spot on the echo sounder and marveling at all sides, I will understand that I have become on a miraculously promising place, but I would have become on a new one and so becoming, navit without such a reasonable attachment.

AT technical characteristics the maximum depth of 183 meters is indicated, but it is important to remember that this parameter is influenced by impersonal factors, including the type of water (fresh or salty), the thermocline and the water in place of the water of various gases, the type of the bottom surface (solid), the type of soil is better signal as well as the speed of the vessel and the quality of the installation of the vibration sensor.

When conducting test tests in fresh water, the depth readings of 213 meters were reached in both echolocation modes. When tested in salt water, the depth reading reached 271 meters in Ribosounder mode, and over 110 meters in DownVision mode.

What is the minimum depth of a robotic echo sounder?

The minimum depth is 0.6 meters.

Why does the image of the depth in DownVision mode change in the sonar mode?

When two modes are turned on at the same time on one screen, the depth values ​​are taken from the ribe-searching echo sounder mode, which has a wider cut in the forward/lower direction, lower in the DownVision mode.

With a quick change in depth, the change of the fishfinder is more stable in the change, the change is lower in the DownVision mode.

Can the echo sounder be switched between robots and other fish finders?

So, the appearance of a shift code is possible, as the frequency spectrum of the CHIRP echo sounder will change with the frequencies of the other echo sounder.

What can you do to improve the sounder?

So, viprominuvannya signals can be muted.

The item of notification / cancellation of changes in the menu, as it is in response to short-time pressure on the sonar button.

How fast can you collapse in DownVision mode?

The system has been tested at speeds up to 45 knots (83 km/year), but it is important to remember that it is possible to operate a fish finder at high speeds depending on the features of the sensor installation.

Are sensors available for the Dragonfly sonar for installation through the hull of the vessel?

Yes, they get out.

The plastic transducer CPT-70, or the bronze transducer CPT-80, can be installed directly in the type of vessel's hull.

Yaka Dozhina Dragonfly Fishfinder Sensor Cable?

The CPT-60 transom sensor has a 6 meter winding cable.

Sensors with installation through the housing CPT-70 and CPT-80 can be wired with a cable of 10 meters.

If necessary, it is possible to twist an additional cable with a length of 4 meters (article A80224).

What needs to be done so that the transom sensor doesn't loosen from the mount?

Adjust the transducer adjustment at the fastened with a special screw.

How to update the software in the Dragonfly fish finder?

For an update software in your Dragonfly fish finder you need a clear map MicroSD memory or MicroSDHC with a capacity of at least 1GB (and no more than 32GB).

Get archives the rest version software, distribution on the site www.raymarine.com at the distributor Service&Support / Software updates / Dragonfly, but for the help.

Respect! Before updating the software, be sure that the echo sounder of connections to the supremacy of life is turned off again, and the ability of the yogo vipadkovy connection is turned off!

• 1. Unzip all the files that are in the archive and copy them to the root directory of the prepared memory card.
• 2. Turn off the sonar.
• 3. Insert the memory card into the attachment.
• 4. Increase the liveliness of the fish finder.
• 5. The update process will start automatically. The procedure takes an hour, by pulling such an echo sounder it is not possible to turn it on from the living room.
• 6. Once the upgrade process is completed, the attachment will run independently.
• 7. After the update is completed, remove the memory card from the display.
• 8. Turn on the echo sounder.
• 9. If it appears on the screen of the preliminary information about the safety of ship navigation, the lower right hand side of the information is shown in numbers streaming version PZ.

What is the maximum amount of memory cards supported in the fish finder?

Be it memory cards in MicroSD format and MicroSDHC up to 32GB.

Can you connect to the Dragonfly fish finder of other attachments?

Fishfinder chartplotter Dragonfly represents functionally-completion of attachments and cannot be integrated with other attachments.

What is the life expectancy of Dragonfly fish finders?

Dragonfly 6: 8W with additional switches; 4.5W for the stun mode.

Dragonfly 7: 9.4W with additional switching; 4.8W in Acquisition mode.

Can the Dragonfly fishfinder be used with 24V voltage?

Ні, fish finder for food support only in the form of 12V fast strumu(In the range from 10.2 V to 16.6 V).

How to renovate the Dragonfly fish finder factory settings?

There are two ways to launch the fishfinder: using the software, using the additional menu of the fishfinder, and using the additional special combination of buttons.

Respect! The procedure for resetting the device to factory settings will see all the settings in the memory of the fish finder and save points and tracks!

Software discount:

In mode " Tools and fittings» it is necessary to go to the point « System parameters”, gave the item “ Maintenance».

« Skidannya nalashtuvan» - Bezpechuyu skidannya only nalashtuvan echo sounder;

« Skidannya nalashtuvan ta danih» – install all factory settings and clear the sonar memory (all saving points and tracks will be deleted).

Push button switch:

• 1. Increase the liveliness of the fish finder.
• 2. Once the logo appears on the screen, press and press the enable/disable button of the fishfinder until you enter the special mode. A white text in black aphid may appear on the screen.
• 3. Fishfinder skiing is carried out for the help of the first paragraph " Reset FLOB and bluetooth". Skid activation ONCE I'll press on the up/down button. After pressing the button, opposite to the item, the turnaround will appear an hour before the discount.
• 4. When the drop is completed, the Dragonfly will automatically reload.