Why is the wireless Internet not working? What is the work, as the phone does not connect to the wireless Wi-Fi network

In order to connect to dartless mesh wi-fi through your phone you need to know the special wifi icon at the phone menu, press it on the new one. If you know all the available measures, among them you choose your own. The connection procedure is simple: choose the required number, enter the password for the connection if necessary.

If everything is fine, then your phone will connect to the wireless network in a few seconds. Well, if not everything is good, then most often on your phone you will receive pardons of this type: " Retrieving IP addresses", "Connection", "Vimkneno"і" Saved, WPA\WPA2 protection It is also possible that your phone is connected to wi-fi, but the browser side will not be interested. If so, the wi-fi icon on the phone is a syriy vіdtinok.

If you have one of the listed more problems, then you just need to reset your router and the phone itself. Possibly, the systems become zbіy. So the way is banal, but it is possible to use wine.

If the problem does not go away, try it on your feet. If you have connected to which router, but at the moment your phone is not connected to a new one, try changing the wi-fi channel. Most of the problem with the channel is blamed on those in your booth, which creates a strong transition to yours.

In order to change the channel of the wireless network, you need to go into the settings of your router. At the settings of the router, check the steps Bezdrotova merezha", "Wireless I others are similar. The skin router is different. Here you change the channel number. If necessary, you will need to save the upgrade of the router and then re-vantagize it. If it didn't work the first time, try other channel numbers.

Now look at the situation, if your phone is connected to the router, but the browser does not want to change the side. Most of the fault is when you first start the router. І vyshennya tsієї problems polagaє at the reconfiguration of the router itself. Everything that looks like you needs - just re-install your router and try again until the new connection.

If your phone is not connected to the wireless network, then in most cases the pardon is due incorrectly. enter password. Guess, maybe, you just forgot about it. Also, in your case, try installing the WPA2 security type.

Even though everything did not help, turn the correctness of the region. It is possible that you have a wrong region and the phone itself does not connect to Wi-Fi. You can also change the wireless network mode. For which you need to go into the settings of the router (there you can change the channel number) and select the item mode. And here it is necessary to change the work mode.

If your phone is not connected to a wireless wi-fi network, do not turbo before one o'clock. Thank you for all the ways, yakі navedenі more, to help you solve this problem.

You can put your own hundreds, and maybe thousands of people on food. Often the situation is comical in that laptops or other smartphones successfully “connect” to Wi-Fi networks for other equals. The most important way for diagnostics is discussed in this article and reviewed tips & tricks for setting up a Wi-Fi router.

Problem symptoms:

1. Phone sack merezhu, but can not connect

2. The phone is based on Android OS (they are relevant for all mobile operating systems)

3. Other attachments (laptop, other telephones - connected)

Possible solution to the problem:

1. At the name of the point WiFi access wink out less English letters

Some exotic add-ons that work on Android can incorrectly process Wi-Fi measures, like Russian letters, probes, special characters or enter numbers. Try changing the USSD name in the settings of the router to be the English word:

2. We select the Wi-Fi radio channel.

The automatic mode for choosing the radio channel on which Wi-Fi is used does not always positively signify on the system with Android devices. The globally accepted standard can be used on 13 channels in the frequency range ~ 2.412 - 2.472 GHz - you can choose yourself from 1 to 13; Deyaki telephony, for example, work only with the first channel - this is a series of telephones samsung galaxy . And deyaki instances Nokia Lumia , v_dmovlyaєtsya practice on any other channel, around the eighth. Ale, we repeat, until the skin phone is needed individual pidkhid. Sound similarly to the roztashovanya in categories Wireless Settings, WLAN Basic, Basic settings. Shukaemo there Wireless Channel, Channel, Channel or similar

3. Grazhemo zі values ​​Beacon interval

Modern modems, routers, terminals have a lot of additional thin Wi-Fi module upgrades. One of them is Beacon Interval. What is it? This is a special wide package, which will take your attachment to the router, confirming that the router is active, I'm working. Such a packet is sent, for blocking, once per 100 ms (1 second). Ale deyakі telephony pochinayut pіdklyuchatisya to merezі, іlki yakshchoy tsey parameter dorivnyuє 45. Or 70. If you ever want to varto try to change this value. Shukaєmo tsey parameter in such categories, like

4. Checking the connection of the phone to Wi-Fi with different values 802.11(b/g/n)

A large number of standards for wireless radio communications have led to the fact that the vendors of the hall have not always been behind the technology race, which has made its own corrections Wi-Fi robot on portable devices. Before you buy a router, you should familiarize yourself with these standards, as well as vin support. This pleasure will be relevant especially for the masters of old telephones, as, for example, they cannot, through their constructive features, support the standard 802.11n. So try vibirati in nalashtuvannyah "802.11b only" or "802.11g only" or "802.11b/g". Shukaєmo tsey parameter in such categories, like Advanced Wireless", "Expansion of customization"

5. Disable Wireless QOS (WMM) on the configured router/modem

So that the phone is normally connected to the network, it is necessary to check that the Wi-Fi Multimedia function is enabled. It will ensure priority for the primary type of traffic (video, voice, data) on Wi-Fi networks. Not all phones can "digest" such specific settings.

6. Search more fresh firmware to your router/modem that distributes Wi-Fi.

It's no secret that most of the problems are solved by flashing the add-on, obviously, for the appearance of a new software. Therefore, the phone or laptop does not work correctly Wi-Fi network then google new firmware to ask "name_attach_firmware" or "attach_name upgrade". Stream version Firmware can be viewed in categories "Status", "Device Info","Information about attachments"

P.S. Even though the phone is still connected, but the sides do not open, the programs do not work

1. Register DNS at the router itself

2. Try different values ​​of the MTU parameter

3. Disable firewall on router/modem

The phone does not connect to WiFi - it's just zhah, why does it need to be, we know it, read all the reasons why the phone does not connect to Wi-Fi here!

I’ll try to find out the reason, the phone doesn’t connect to Wai Fayu through a hack. Let's do it ourselves.

Possible reasons

If your smartphone is not connected to the home wireless network, then there may be several reasons:

• wrong settings on the phone;
• incorrect settings on the router itself;
• incorrect password;
• I'll add blocking to the list of the router.

Now let's look at the skin reason and try to clarify why the phone is not connected to the Wi-Fi router.

Installation of a mobile annex

We have to check if Wi-Fi is active, as an indicator without a dart on the extension, burn in the normal mode, then it’s robimo like this:

We see before us saving the connection:

Situations often arise, if WiFi is connected but the vanity of the sides is not visible, ask the great number of vipadkovo on the right to cry in the best settings to give the hour! So, just fill in the correct data on your smartphone or tablet!

In that vipadku yakscho given algorithm do not dopomіg, it is necessary to go to the patching of the router.

Setting up the modem

Well, well, the router is already buv lashed, but yours new phone or the friend’s device does not want to be connected, then on the right you can be in the WiFi channel connected.

You need to change the channel from “Auto” to 7 (otherwise, if there is another one, you still can’t get it right, but most of all, channel 7 itself).

For this, through a laptop or a computer, connecting by patchcord, it is necessary to go into the setup of the router:

More often than not, the connection problem is blamed on Windows phone smartphones and won't be violating the change channel.

Forgot password for router

In this way, yoga can be looked over through the connections to the computer. We have prepared an article for you about how to see the password for your WiFi.

If this option does not rule you, then you can rob hard reset Router and rebuild yoga again (referenced to our article on this topic, it was better):

Well, after re-checking all the settings and carrying out the necessary manipulations, the phone itself does not connect to WiFi, then it’s the same for everything on the right already in the WiFi module of the smartphone itself.

Skip smartphone settings

The remaining option here is to drop yoga to the factory setting:

Respect! All special data on the device will be deleted, therefore, for the sake of creating backup files for help, be it a special program and synchronize contacts with gmail account for a little further inspiration.

Now you know that the work is that the smartphone is not connected to the Internet via Wi-Fi. Also on our site you will find a solution to other popular problems related to Wai Faem and others. Following our instructions, you can quickly fix all the mistakes and malfunctions of your computers and phones.