You can change the May of your Samsung smartphone. Backup and update IMEI, change IMEI on smartphones

Golovna / Nalashtuvannya

IMEI - this is a unique set of 15 digits, which is assigned by the skin mobile phone that to serve for _identif_katsії I will attach in the measure of GSM. Quite often the masters of the Chinese devices of the sumnіvnіvnіvnіnja stikâyutsya z vіdsutnіstyu tsgogo code on the device. That and after backup or Android IMEY firmware can also fly. And tse often add to the quality of the call on smartphones. Let's figure out how to change IMEI on Android for a nasty reception of a GSM-merezhі or restore serial number after yogo erasure.

How to assign IMEI on smartphone

Before that, remember IMEI on Android devices, it is necessary to recognize IMEI, which is the type assigned to this device by a dialer. It is possible to make a kіlkom with paths:

After you know how to recognize the id, you can move on without interruption until you change it.

Methods of renewal

You can change or change IMEI on Android in two ways:

  1. Through engineering menu. Yak and Wednesday recovery recovery, it has been transferred to all outbuildings that work on Android.
  2. For the help of a supplementary software. Three programs that allow you to register new IMEI, see Mobile Uncle and Xposed IMEI Changer.

Change IMEY through the engineering menu

Engineering menus are tested for testing optimal alignment mobile attachments. This area is assigned, however, it can be activated for additional simple USSD commands that are entered through the standard dial pad. For different models of smartphones, the commands can change. For example, for the engineering menu on the HTC phone, the combination *#*#3424#*#* or *#*#8255#*#* will be relevant. For Samsung, follow the command *#*#4636#*#* or *#*#197328640#*#*.

After entering to the engineering menu Change IMEI be carried out in the following manner:



To change the parameters, dialed the rank, the smartphone should be re-vantaged. After that, how to change the IMEI you are far away, you can reconsider in a positive result for the help of these commands * # 06 #.

Changing the ID through the addendum PP

The choice of the specialized software transfers the presence on the telephone of the rights of the super-correct person. Їx activation can be done with additional programs Romaster SU, Universal And Root, Farmaroot and others.

So, for a mobile add-on with extended access through Farmaroot, it is necessary.

How to send a SIM card from Yota with a tariff from a smartphone to use a tablet

* For some smartphones, you can change IMEI only by flashing the radio module (baseband) or by using third-party utilities for redirecting AT commands (for example, AT-command terminal). Methods for flashing the radio module lie in the form of a smartphone and flasher.

Method 1. Through engineering mode.

Dial from phone: *#*#3646633#*#*
Consumable to engineering mode (engenieer mode)
Go to the Connectivity tab
We collect: CDS Information > Radio Information > Phone 1
Above the AT+ row, add: EGMR = 1.7, "your_IMEI"
For change IMEI on another SIM card (usually є), repeat forward crochet, but also write: EGMR = 1.10, "your_IMEI"
We press the button SEND AT that revantazhuєmosya.
If you don't want to log out, then after AT+ you need to put a probe.

Method 2. Through the console.

For robots, we need a Terminal Emulator

Please install the emulator. Open the emulator and type in a series of commands:

Team:

su
echo "AT +EGMR=1,7,"YOUR_IMEI""> /dev/pttycmd1

Also, if you have a dual device, then to change IMEI on another SIM, you need to add:

Team:

echo "AT +EGMR=1,10,"YOUR_IMEI""> /dev/pttycmd1

For some phones of non-Chinese brands, the command can help:

Team:

su
echo -e "AT+EGMR=1.7, "YOUR_IMEI""> /dev/smd0

Team:

[b]su
echo -e "AT +EGMR=1,10,"YOUR_IMEI""> /dev/smd11

For HTC phones You can help with the radiooptions utility:

Team:

radiooptions 13 "AT +EGMR=1,10,"YOUR_IMEI""

Method 3. For MTK processors.

First option. Shvidky ta easy way replace-update Imei. Practice on All! MTK. Win Xp/7/8/10

Zavantazhuєmo and unpacking the program. Vidkrivaemo text editor file run.bat, minyaemo IMEI we take it on our own. Let's start run.bat If everything was done correctly, then the file will appear MP0B_001. Let's drop yoga on the phone. Now we have 2 options:
Copy yoga manually.
For whom it is launched file manager, which you can dig at the root paps. Let's go to /data/nvram/md/NVRAM/NVD_IMEI and copy the file here with a change, verify the rights (as a link to this file, tobto. rw-rw----).
For the help of a mobile uncle ( mobileuncle tools).
Rename our file IMEI.bak and put in the root of the SD card or internal memory. Launch mobile uncle, choose IMEI Backup Restore (MTK) and, depending on where the file was placed, select from the two lower points.

The option is different. How do I change IMEI to Tornado Explay. VAT -MTK

2. Get drivers for the required model.

3. All for instructions:

Change imei to any device Android

Maui Meta 3G- program of renewal and backup of stylnikovs phones Fly, Explay, Philips and others based on MTK processors.

1. Run the program.

2. Tisnesh Options, check the box Connect Smart Phone in META mode.

3. Phone CHARGES if you want to 50 % ale no inclusions...

4. Install drivers.

5. Tisnesh Reconnect.

6. Turn off the phone, connect it to the computer, and check the computer is to blame for the phone ... (as it didn’t work the first time, turn on the phone and close the program, remove the battery for 5 seconds and repeat everything in a new way. telephone)

7. Select from the program imei download.

8. Press on the window Change nvram database file and select file from dad official firmware which axis is repaired like this (BPLGUinfoCustom) and the pressure is ok.

9. You will have three tabs (sim1 sim2 sim3) for the skin sim, enter imei without the rest of the digit (it will be added automatically)

10. After you enter imei for all sim tysnes download to flash.

11. Starting and embossing Discinnect.

12. Phone reset after what you enter *#06# And you swear that all three imei are on the spot. Try like this.

4. Inserting firewood is not without pain. The phone was showing up as a necessary attachment to us and suddenly disappeared. I installed the drivers from the unpacked folder, but when I plugged it in, it showed up and started to sound. The Tornado also hung, I installed firewood on the new one, and everything went as per instructions.

For a pіdbag only in such a rank I changed imei. Good luck to you.

ATTENTION!!! All you do is work on your fear of the rizik. Site administration does not bear any responsibility for your activities. Changing IMEI is not legal! (There are no proofs). Seeking the recommendations of this topic, you take on yourself all the credit for the tips.


Imei on Android is a serious pardon, through the device it sends a call signal, to make it impossible to make a call, send an alert or go to the Internet.

Cause a winknennya zboya:

  • Incorrect firmware I will attach.
  • Pardon when turning the smartphone to factory settings.

Actual models Chinese smartphones you can work without an identifier, but if you have a similar device of a different brand and your May is angry, then the application will be incorrect.

Manual renewal

Dial to Android phones combination *#06#. If the IMEI code does not appear on the screen, it is necessary to confirm the term. You can look at the identification number on the box, in the instructions or under the battery. If your smartphone supports two SIM cards, you must enter two IMEI numbers.

Manual IMEI update on Android:



Note: the combination for the entrance to the engineering menu is available on other outbuildings.

If more than one number is not suitable, try:

If Android supports two SIM cards for you, you need to repeat the procedure for updating the identification number. For another SIM, the command will be: AT + EGMR = 1.10, "IMEI".

After renewal, it is necessary to exit the engineering menu and reconfigure the phone. Then again dial *#06# to check IMEI. If the number is not displayed, then in order to correct the pardon, you need the IMEI Android update program.

Software updates

Yakscho manual renewal did not help to solve the problem of the presence of the ID after the firmware, try the MTK65xx.zip program.

After re-advancement, I will add *#06#. I will add a number for identification after the firmware, it will be renewed. If the above methods did not help, how to restore IMEI on Android after firmware, try one more option:



Using Root Browser, move the MP0B_001 file to the /data/nvram/md/NVRAM/NVD_IMEI/MP0B_001 directory. After rescheduling these data, re-advantage the phone and re-verify the identification number - this time the fault is to be shown correctly.

Video instruction

IMEI- This is the unique serial code of the phone or tablet with the function of the call, which is the best guess for the hour of the phone meeting.

Vіn allows you to enter the phone number, tobto. the operator can know your location for additional technology. If you dial the number first, the code of your phone is transferred to the operator's database and stored there forever, so you can change the SIM card.

Varto designate that the change of aimey may be illegal, the skin region takes your child to the right nutrition. Here it is fenced, and here on qiu I change my eyes. That change of the serial number is important for suspicious busy people, even if people don’t change the number just like that. It may be related to the purchase of food, the sale of "sirih" telephones, or maybe not for others.

ChangeImei

To check your imei, dial the combination *#06# and you will be prompted at the end with the serial number.

In order to change imei, we need to eat in the engineering menu. Є kіlka ways to grow.

Dial the code. Dial *#*#3646633#*#* and consume in engineering android menu. Immediately robimo swipe kill and go to the menu Connectivity».

Once you have entered the menu, go to " CDS information» i potim u « Radio information". Choose your phone and go to the menu. You will eventually have different information and a series of introductions to the beast. You will need to enter a special code: " AT+ EGMR=1.7,””yourimei". If you want to confirm your serial number, you can find it on the box of the device and enter it in a row. Alec's method may not support all mobile devices.

Another way foundations on vikoristannі programs mobile uncle, And “Mobileuncle Tools” itself, a funny name, isn’t it? BUT reportїї nalashtuvan learn from the video. You can get the program in the play market. I'll take a look!

Minyati IMEI number or Device ID on Android add-ons is not the best idea, a protein is simply necessary.

As you can see, IMEI is changed for the purpose of rozstashuvanna mobile annex. So, if you spend your smartphone, it’s better that you don’t know yoga any more.

First of all, if you need to turn on the smartphone, so that no one could know it, then you need to change the IMEI number, serial number, device ID, Donkeyguard number, UDID.

Let's get it right, now you need to change the IMEI on the Android device.

Reasons to change IMEI on Android

  1. Zrobiti Android Appliance"invisible".
  2. Correct the pardon with the weekly IMEI number.
  3. Zrobiti skidannya, renovation and repair of a mobile annex.
  4. Select a unique device identifier (Device ID).

We'll tell you about a unique way to change IMEI on Android devices (including tablets). You can vicorist ROOT access, and without it.

How to recognize IMEI number or Device ID on Android:

If you want to know the IMEI number or the Device ID of your Android, follow these instructions:


  1. To find out the IMEI number of your device, simply dial *#06#.
  2. To find out about the Identifier I will add (Device ID), dial *#*#8255#*#*. Another way to recognize Device ID, go to offensive address: Menu > Settings > About phone > Set.

How to change IMEI on Android:

  1. First, dial the next code on your Android device: *#7465625# or *#*#3646633#*#*.
  2. Now select option CDS information
  3. Dali press on "Radio information".
  4. How does your Android device have a slot on two SIM cards, then you take two parameters, for example, IMEI_1 і IMEI_2 . Select one of them to change the IMEI number.
  5. You can change IMEI on Android as shown below. Just replace IMEI1 or IMEI2 with any number, after which press SEND.

AT+EGMR=1.7" IMEI_1” and “AT+EGMR=1.10,” IMEI_2

How to change Device ID on Android

I will add an identifier on Android, but it can be changed both with ROOT access and without it.

Change Device ID on Android with Root rights

  1. The back of the head needs to be removed Root rights for your build android.
  2. Then select and install Device ID changer .
  3. Follow the instructions to start the program.
  4. After changing the Device ID, you need to re-attach the attachments.

Change Device ID on Android without Root rights

  1. Go ahead, grind backup copy Android add-ons.
  2. Go to the section Installations, Backup and Skidannya settings.
  3. Let's press the button "Download data".
  4. After resetting to factory settings, you will remove the new and unique add-on identifier.

Give respect to victorious given method, you can see all the data on your smartphone or tablet, including information, contacts, programs, photos and more. We recommend that you create a backup copy of your add-on.

Why is everything! How about changing IMEI on Android is not so complicated, but Device ID is even easier!


© 2022 androidas.ru - All about Android