Why can't I access the TP-Link web interface? Typical setup of routers Tp-link Tp link login to admin panel

When changing the password, you need to log in to the wireless, Wi-Fi, network, or in order to do this, you need to set up a router. At this article, we know how to enter the configuration settings on the butts of many of the most popular routers.
Also, behind the help panel of the router, you can change the number of settings: in the form of changing the access point to the parameters and status wireless internet connection.

TP-Link routers

D-Link routers

Method 1Find the disk in the box with the router and read the instructions.

Method 2 Speed ​​up the panel to fix the router.

To launch the panel D-Link router you need a working browser. Vіdkryte yogo ta vykonayte sequentially chotiri diї:

Asus router

How to connect the Asus router immediately to the computer is shown in the diagram:

After the day Asus router with a computer, it is necessary to fix the measure in such a rank, so that it will automatically remove the IP address in automatic mode. Usі nalashtuvannya zdіysnyuyutsya at the center of management of the fence. Go to the new one and press on the fence, as if to reach the router. Check out the TCP/IP protocol authority parameters.

For whom it is necessary to indicate a special ensign, which gives the possibility to take the address automatically, when you enter.

Do not launch the panel to fix the router, the docks did not connect the router to the computer. If two outbuildings are not connected, you will not be denied access to the entrance panel. Please inform your browser about the impossibility of connecting with the remote server.

Zyxel Keenetic routers

Scroll down below three words:

Router Rostelecom

How not to connect to the web address of the router

Connect two attachments - a computer and a router - correctly, go to the PC task panel and select the active connections:

Setting the IP address of the router

For whom do you need a merging management center? double access. Find the icon of the day local mesh. Marvel at "Stan", clicking the bear.

Vіdkriєtsya vіkno z vіdomosti. Vіn revenge the data about the connection of the measure. You need the item "Gateway for locking IP". Copy the numbers and enter the address in the row, then press Enter.

Manual connection address setting

Change the ensign from the automatic removal of the IP address, DNS servers and configure in manual mode, selecting two items: "Christmas IP address", "Christmas DNS server"

If you have a TP-Link router, enter the following details:

Skimming the router settings

At the time of the reset, all parameters will be locked, which means that you can change the standard password for authorization. The password is entered on the router itself or in the help.

There is nothing collapsible at the skidanny nalashtuvan. On the router at the back special button. Victory the necessary item to press on the new one. Trivality zatiskannya close to 9-14 seconds.

So, since you already have a description of the instructions for entering the installation of more advanced routers, navigating the instructions for entering the control panel, then you should not deprive the sense without respect, having written an okremium instruction and for the lower ones and drinking the TP-Link devices.

We connect ourselves

Another advantage of the add-on in the company is those that the process of removing access to the control panel is no more folding, lower on other routers, and may be identical to any model of router in the company9 (TL-WR841N, TL-WRTL7N-WR841N, TL-WRTL77 .).

It’s not surprising that after buying a router for your own installation, you need to add an entry to the panel to install. Zavdyaki statti from this site is unlikely to be deprived of the ability to close up with folding configurations of routers. Adzhe is not respectful of the service of the master at cob setting, if you feel like using a router, singly, you don’t need to make changes to them: change the password on Wi-Fi, restore a forgotten password I firmware update. Postiyne zruchnennya to majstra zruchnosti not to add, that th family budget do not spare. Even with us, you can go on your own, but if you find it difficult, you can turn to the site for help.

Removing access to the TP-Link setup panel

In order to get into the situation, it is necessary to set up the next steps:

• Let's connect to a Wi-Fi router. It is possible to connect through the Wi-Fi tether, or behind the help of the tethered cable. If you want to be able to get into the system via a smartphone, or from a tablet, it is still recommended to use a laptop or a PC.
• For the help of any web browser, depending on the type of router, go to one address:, or. Yogo can be pumped on the lower part of the building.
• When prompted for a login and password in both columns, indicate " admin»or I’ll have the information, as if it were changed.
• You have reached the panel on the wall.

Detailed description of the connection to the building with illustrations

Vikoristovuєmo Wi-Fi, with a scheme for how to get to it, you can find out here, or a cable for connecting to a router. Yakshcho your priyy ledve pridbano, naming dartless mesh may be typical. Go to the box "TP-LINK_0919".

Also for connecting to a router (to the LAN slot of the yellow color) and to a laptop or PC, lace adapter, you can use the cable that goes into the dial with the router, as shown in the photo below:

Then we will need to launch a web browser on your PC of your choice. TP-Link has more than one IP option for logging into the system, for TP-LINK, for logging into the control panel, you need to write in the address bar of the browser with a strong login and password admin | admin (by default, older models have addresses 192.168.1.1 or 192.168.0.1) . You can know yoga on the stock market, which is glued from the bottom to the wall I will add. On this label, information about IP, template passwords and login is displayed. Knowing these statements from the future brought melancholy.

Let's re-stream to the address entered in the web search. At the vіknі, scho rozkrylos, scoring typical login and password. admin“. If the template data has been changed, it is required to enter the actual data. If you require a different standardized password and the name of the host, for example, you cannot guess, it is necessary to reset the router.

The TP-LINK company is one of the leading manufacturers of fencing. We need detailed information, how to connect or reconfigure TP link router. The procedure for connecting to an attachment, setting up a dart and a dartless tether, changing the password and updating the firmware will be examined. Otriman information to allow without problems home measure at TP-Link routers.

What data is needed to connect the router

To change the parameters of the router without intermediary, you need two words: the browser and the password from the login for access. The rest of the data can be found on the label, which is attached to the building. As a rule, the standard login and password is the English word admin.

For the Internet to use the internet, it also needs data for authorization, which must be taken from your provider. When tsomu stench may be written in the contract about the nadannya services. It is necessary to enter them at the router or a special program, as expected by the provider. Obov'yazkovo know about the type of connection (PPPoE, L2TP, PPTP and others) for correct alignment. When choosing a dynamic IP, you need to recognize your IP address, the mask should be different. Since all these parameters are already on hand, you can connect TP-Link.

The order of connection will be built to the merezhі, PC or laptop

The procedure does not cause great difficulties, with which it takes 5-10 minutes. Followed by the vision of the viscounty, the steps of the offensive instruction:

Models with Wi-Fi can be upgraded "on the fly". This is relevant, since you don’t have the ability to connect the router to the computer via LAN. On which manipulation of the wires is completed. Then the process continues at the web interface.

Login to web interface

Manipulations with the modem are no longer handled by the web interface. You can drink in the new one from the computer when connected mesh cable or through Wi-Fi without a dart model. Respect! You can hack the interface, whether it be mit, navit with an impractical Internet. To enter, follow the instructions provided:

Setting up a router

Let's go to the next one - change the parameters of the router. More than 10 different cuts were stashed at the head vine. More of them are not needed by simple coristuvachev. Activation of the Internet is carried out at two branches. We gave a detailed report on how to fix the TP-Link router, about the creation wired connection, setting up Wi-Fi, changing the password for entering and other brown speeches.

Connection to the dart fence

The router has the function of swedish adjustment. Pochatkivtsy are recommended to vicorist themselves. Press the “Dalі” button and finish the installer prompts:

When setting other types of login, the fields for entering the login and password are displayed. Here it is necessary to enter the data that the provider will give. You can change the parameters of the koristuvach at the Merezha branch. In the other models of "TP Link" entrust the choice of the type of connection - the button "Select" to help you recognize your type. On the basis of the WAN, different characteristics are already being adjusted.

For example, for the PPPoE version, the windows already have fields for login/password and parameters that control PPPoE.

Connecting through a wireless mesh

For attachments with a Wi-Fi module, you also need to set up a wireless connection. You can pay for the security adjustment (the transfer point for transferring the introduction of all important parameters).

Let's figure it out, yeah Wi-Fi setup TP-Link router next change. Movlennya next to install at the camp "upbred". SSID or im'ya merezhі - tse those that can be seen on other outbuildings for an hour of searching. Specify your region, change mode. Fill in the channel and the width automatically. Extended cords can be selected independently from the arrangement of occupied channels by landline routers. If you want to set a password for that access point, select the WPA2-PSK password type. At the end, I forgot to enter only the password jetless point merezhі. Press the "Next" button and complete the process.

Similar settings can be found in the "Jamless mode" section. To change the SSID or channels, select the item "Settings dartless mode". You can change the password at the branch “Protection of the droto-free mode”. For any change, do not forget to hit the "Save" button. If the selected parameters have not changed, please reconfigure the device.

Through qi menu items, you can configure the routers of the TP-Link picker.

Changing the password for logging in to the web interface

All Vlasniks are recommended to change standard password that login type of the router. It is not surprising that the attacker is behind the password access to Wi-Fi, otherwise the evil one can get to the modem parameters and “have fun”. It doesn't matter if you solve a problem, but better than that, get lost. The interface allows you to manually remember input data:

If you forgot your login details, please reset the data to factory settings.

Expanded customization

Router may masu additional functions yakі expand yoga possibilty. Take a look at the acts from the slipped lashings:

• Guest line. Allowing you to make public guest mesh, divide the entrance/exit traffic or the hour of work.
• Address change. It allows you to set a static IP address or turn on DHCP.
• Forwarding - setting up a virtual address, web telephony, conferences, etc.
• Functions Batkiv control. Exchange of time for access to the Internet or specific resources.
• I will manually manage the routing tables (for specialists).
• Bind MAC address to specific IP.

For a report on how to improve the specific functions of the TP-Link router, you can contact the service provider.

VPN

This technology allows you to capture information from third-party eyes. Encryption is broken, why can't you find your provider. However, only those models, on which a VPN server is installed, can win a VPN. Vikonati nalagodzhennya is possible for the next steps (for English firmware).

Routers and TP-Link modems deserve well-deserved popularity for their superiority, low variability and ease of management. Instructions are on the butt of model TD-W8960N.

Before switching on

The main function of the router is the creation of a local wireless network, like connecting computers, laptops and mobile gadgets at the borders of the booth / office. Another, no less important task is the connection of the network to the Internet. Therefore, before the first switch-on of the router, it is necessary for the mother to close the connection with the provider. Sound the stench prescribed by the contract and the instructions of the provider. Since there are no settings, then when connected, you need to dial the phone to the technical support and ask for a call.

Before you notice, you need to look at the lower part of the case: for TP-Link models, for setting up a router, you need the following:

IP addresses: call 192.168.1.1

Login: admin

Password: admin

If the values ​​of your model are being reviewed, it is better to rewrite them or remember them.

Before turning on the dromeless modem

1. Connect the data cable of the Internet provider to the router. Ring the telephone cable (ADSL connection, video line), or Ethernet wire (optical fiber, LAN). The next connection is a 3G / 4G modem, connected to the USB port of the router.

2. Connect the router to the power line: TP-Link will supply a power cable with the kit.

Connecting to a router

If everything is fine, then after 20-60 seconds the router will be ready to work again. Tsey hour is spent on the firmware download. Finding out about yoga practice can be supplemented by light indicators on the front panel. Before speech, at TP Link routers, the "light bulbs" glow with a soft receiving light, not annoying at the darkness. Indicators to display icons or write. Evil to the right:

· Life indicator: start the notice when the notice is added.

· Internet: shows the practice of connecting with the Internet. When first turned on, it does not work; in the online mode, flicker or glow constantly.

· ADSL or LAN; 3G, 4G for Beeline and others mobile operators: False according to the type of provider, showing the presence of the signal according to the new one. With the first one, you can blimat, or you can be ignorant.

· WLAN (WiFi/Wireless): Access point indicator. To mereht or shine already at the first connection.

· WDS: not available on all models, subject to expansion of the wire mesh cover.

· Can have other “light bulbs” – USB port, QSS connection, 2-6 local tethered ports. It is normal that none of the indicators are still lit. Like a repeater, light signaling can be different.

Construction of a PC with a streakless sieve

For setting up a TP-Link modem, you can connect a smartphone / tablet, or we can look at the old connection from a PC or a laptop. As the router works, it also “distributes” the wireless mesh (which expands the security zone with additional WDS technology). It is called out as standard and tedious - type TP-Link_15616, and it can be seen from any kind of outbuilding. You can work without a password, and you need to change the password.

Connect a computer up to new lines Wi-Fi. Icon dartless connection in the Windows tray, it will be crossed with a cross (or another icon for the daily Internet).

You can set up a TP-Link router with the help of a browser. Entering to new address row 192.168.1.1 (without www): This is the router's login panel. Remember - IP-addresses, plus - login with a password overruled on the lower part of the case? Otzhe, mitteva authorization - mi in the top of the access point. If it is possible to change the language, then you can work boldly with TP-Link: the company is famous for its decent translation of its firmware.

All about setting up a wireless router

Pokrokov's instructions - connecting to the Internet, setting a password, passing parameters: WDS, MAC-addresses, encryption algorithms.

Head side of the TP-Link keying panel

On the head side(Device Info) Nothing can be changed - all day informational distribution. At the top part of the information about the firmware and version of the model, below - the streaming indications of the access point that is connected with the provider, as well as the date and hour.

Respect! If the router is reset, then the values ​​in the Device Info table are due to the non-zero values. This is where it is zero (or the value for kshtalt is 0.0.0.0) - it’s not easy to connect from the connection. True, repeater - the mode allows zero values.

How to connect a router to the Internet

Connecting and connecting to the Internet is available in the Quick Setup section ( shvidke nalashtuvannya TP-Link router) of the default menu. In other models, this branch may be called WAN Settings/WAN Configurations.

How to connect a TP-Link router to the Internet: set up WAN and ADSL

At whom you have distributed everything, everything must be set up to drive in 2-5 parameters of the connection, which the provider is relying on. For example:

· connection method (WAN Link Type): PPPoE mode;

· VPI/VCI value set to 0 and 33;

· login (PPP Username) and password (PPP Password) for authorization at the provider (do not confuse with the login-password of your special bezdrotovoy merezhі!).

The skin provider can make its own adjustments: for Beeline they are the only ones, for MTS - others. If you want to stink vaguely, you should recognize them yourself from your Internet operator. At any rate, to connect the router to the Internet, you need to enter no more than a lower value. If the router works as a repeater, it is not necessary to connect to the Internet. These parameters are required only for the access point.

How to set up a dart-free merezha

The left beach menu has a Wireless distribution (“Bezdrotova merezha”, Wi-Fi and other names). We are there.

Distribution of basic parameters

Basic wireless parameters of the TP-Link router

Basic wireless parameters of the TP-Link router:

· Enable Wireless: Enable wireless network. May be ticked.

· Hide SSID Broadcast: Hide the name of the network from the air. The informal name of the option is “paranoid mode”. With a literate password like 463sltjHe, it is impossible to break the lock, regardless of whether the repeater transmits its name, or not.

· Wireless network name: the name of the wireless network. Better than vikoristovuvavat schos sobiste, schob once vlazny vlasnu merezhu vіd susіdskih: The-Best-Wi-Fi, Aleksey's Network just. Permissible English letters, numbers, clearings, ale no Cyrillic.

· Country: non-language parameter. For a robotic TP-Link router, it is not necessary to fix the edges. You can turn your region, you can forget.

The Apply/Save button is standard for all divisions – it is necessary to press after the adjustment before proceeding to the next division. Respect! Before that, how to change the name of the security, the type of encryption, the password, the WDS mode, etc., please check: open the connection of the computer to Wi-Fi. It is better to click again on the icon of the date in Windows and select the newly created border (enter New password) for skin pristroy in merezhі. They don't join on their own.

Rozdil Security - security and Wi-Fi password

Mabut, the most important part of the patchwork. The QSS parameter (in some routers it is often called WPS) is valid for the speed of getting new devices to your system without entering passwords. If I measure my posture at home (in the office), then it’s better to disable yoga (disable).

· Network Authentication: type zahistu. Memorize the word WEP - and don't swear by any means. WPA is on, or WPA2 - the same other values ​​are not suitable for a protected site. Allowed different types of WPA (Home or Enterprise) are also allowed. Vtіm, іsnuє old-fashioned povіr'ya: a man, as if he did not encrypt his dart-free merezha, will go to heaven.

· The setting of Open in the encrypted area means that third-party vipadkov people can use your Internet, with which they can access the computer in the area. Victory only once, if you know exactly what you are doing. Go public Wi-Fi with no-cost access for a cafe/gym at once adopted password protection.

· Wireless Network Key: enter your password in the wireless network. Do not confuse your password to connect to the provider. The password itself allows other attachments to be connected to the merezhі. If the device is victorious as a repeater, then it is not necessary to set a password. Passwords like 111111, qwerty, Andrey too thin. early chi pіzno obov'yazkovo will be pіdіbrаnі susіdami. Choose a folding password, with letters, numbers and special characters, no less than 10-15 characters.

Old joke: best password kom'yuternika - the nickname of yoga home creatures. Aje at a professional IT specialist, make the dog sound like a type [email protected]!kw.

· Encryption algorithm (WPA Encryption). So very good and AES, and AES-TKIP, there is no fundamental difference.

Rozdіl prosnutyh nalashtuvan (Advanced)

Advanced Wi-Fi setup. Drawstring protruding.

As a rule, TP Link modems do not need to push installations. Everything can be practiced for the promotional values.

2. Mode (mode): b / g / n / ac or їх variations - bgn, bg and in. In fact, a generation of the Wi-Fi standard. Next, select the most recent connection mode in settings, setting bgn, or else - bgn + ac. Other essentials for rare fluctuations in the inconsistency of outbuildings.

· The old-fashioned and popular a and b-modes hardly managed to inspire mastitis fahivtsy. Surplus for the summation, vicoristovuvat їх not a trace.

· Old g mode: it is possible to tinker, as the old additions are categorically recommended to work with other modes.

· Current standard "n": the widest and largest outbuildings.

· Supramodal standard "ac": not supported by all outbuildings.

Nalashtuvannya, which is rarely vicorous

Other bezdrotovy divided panels keruvannya TP-Link will be needed only in special cases - for example, for connecting to VPN, so let's go through them briefly.

MAC Filter - filtering on the MAC address. Allows you to connect to the meter and turn it on by manually setting the extensions, that and after entering the password. Happy strangers. Not recommended for home victoria, for a small office, for all your own.

Installing VPN on routers: not possible on all models. The function is more advanced.

Wireless Bridge (WDS): the ability to beat a Wi-Fi router as a repeater - repeating a Wi-Fi signal already. Zastosovuєtsya for "upgrading" to the radius of the other practical and patched router. In other cases, it is necessary to change the already established AP mode (Access Point - access point mode).

Visnovok

Setting up a router is easier to navigate for non-fakhivts, and even more necessary. Razіbravshis at the parameters once, the more not vyklikatimete majstrіv and nalashtuvachіv - food is less than 2-3 hvilin hour.

There are no single instructions for arranging dart-free merezzh, ale charitable principles however, for any models. Fewer details are given out: some outbuildings have the terms Wireless, others - Wi-Fi; The new models use the standard “ac” tie, the old ones use the b/g/n-merezhami. The example of installing a TP-Link access point is also for ASUS, and D-Link, and others - they are more likely to be used. Direct analogy: low-frequency ovens are the principle of the same, and the buttons are three different.

Good day, dear readers. In the rest of the world, the population of our country has widely cultivated new laptops, portable tablets and mobile phones, what can be done with the Wi-fi module, what to rob we can connect to bezdrotovyh merezh at be-yakіy point.

Wi-fi is a power supply, which is long overdue "how to get along without wires", and allows you to distribute the Internet at the whole house or apartment. Today, we will figure out how to fix a tp link router, having removed access to Wi-Fi from your booth. And at the same time we will look at other related problems.

Nutrition, yakі mi torknemosya in tsіy stattі:
How to connect a router to a PC;
How to set up a connection to the Internet;
Setting up the Wi-fi security system, setting the password;
And a lot more.
First, let's start with a briefing, I would like to guess that wi-fi is absolutely not bad for health. I am writing about tse, the one who repeatedly happened to me a little bit in the opposite direction. So, yes. TP-Link TL-WR841N Router - ideal solution for connection to the home Internet for a special price/capacity.

Connection TP-Link TL-WR841N

In total on the rear panel of TP-Link TL-WR841N there are 6 buttons and sockets:
1. Notice/reprimand;
2. Inlet for the cable of life;
3. WAN-input for connection with the Internet;
4. LAN login to connect router and PC;
5. QSS button;
6. Reset button.

You must first connect the router to the computer or laptop. To connect the router, you need to embed an Internet cable from the provider with RJ-45 socket into the blue WAN input, and embed the twisted pair cable from the computer into one of the yellow LAN sockets.

After that, it is necessary to connect the cable of life and change it, so that the router has turned up.

TP-Link TL-WR841N

If so, it is necessary to set the entrance to the panel with a router. Choose any browser (Opera, Mozilla, Google Chrome or Internet Explorer). At the top row we enter addresses: "192.168.1.1" or "192.168.0.1"

Viply in the end for identification. It is necessary for a new person to fill in the fields "First name" - admin, "password" - admin. Having finished everything, we will move on to the main end, in which you can change the setting of tp-link tl-wr841n.

Im'ya koristuvacha admin and password admin є nalashtuvannyam for zamovchuvannyam. If you write to you that "the login or the password is incorrect", then it is better for the router to have already been adjusted earlier and it is necessary to reset the settings to the factory settings by pressing the Reset button.

Password reset

First, a necessary procedure - change standard login that password to unique. Robiti її You will not be disturbed by anything, however, having followed a number of awkward procedures, you will be more and more convinced that your router is nadily theft. There will be no foolish traffic through those who steal money.

Do not forget that, having changed your login and password, and having connected with special data, write them down in a special notebook. Otherwise, you may be able to spend the opportunity to access the Internet and even have to re-establish the connection.

Go to the menu "System Tools" - "Password".

Sometimes it gets so tricky that the postmasters of the Internet do not give such services, as they automatically configure the addresses of DNS servers.
In this case, it is necessary to enter them in the necessary divisions, having voted on the item “Victory DNS-servers”.
Another option - Static IP addresses. This way of fixing and installing the troch folded. In this situation, all the changes are independently registered, as if it were necessary to connect with the Internet.

At the menu "Merezha" - "WAN". The option of entering Static IP is indicated and all the other values ​​are entered according to the agreement with the Internet provider.
3rd option - "PPPoE" - entry is required when entering the login and password. Okremі providers with tsommu zastosovuyut on additions and static IP. For such a view, it is necessary to enter the data "IP" and "Mask of the subdivision".

As a result, the MAC of the router will be identical to the computer one and, as a result, the Internet connection will be functional. It is necessary to pay special attention to those who have a different Wi-Fi router set up with another PC, then the MAC needs to be loaded independently from a specially introduced for this field.

Installation of wi-fi meshes

Our instructions have the most important place, remember to take it and accept it before the victoriously, it is necessary and respectful. An important group of koristuvachіv arrives and personalizes the router exclusively for modeling a wireless network with the possibility of a mother to go to the Internet.

The process of introducing a nail polish does not take too much time.

In the menu Wireless mode - Settings for wireless mode. It is necessary to enter data with the parameters Name of the area and region. It is necessary to remember about the need to save all the things.

"Encryption" - the item "Automatically" is selected.

"PSK password" - a personal code is stored, which protects accessibility Merezhi Wi-Fi. The same password that will be needed to connect to your wi-fi network.

After all the steps in the general language order, you will need to save the settings changes. If you can speed up the Internet.

On whom everything. As always, I encourage you to look at the beginning of the video for the material of the article.

If you are out of food, please write them in the comments.