All-weather access point WiFi Ubiquiti NanoStation M2.

Hotspot Ubiquiti NanoStation M2 finish the new grave in the arena droitless possession see Ubiquiti. Practice on frequency 2.4GHz in the range often from 2.412 to 2.462 GHz that support technology 2x2 MIMO, which allows you to practice at the same time in horizontal and vertical polarizations. Be safe 150 Mbps real throughput to the channel, of the old victoria on the vіdstan to 15 km.

The access point Ubiquiti NanoStation M2 is client-specific, equipped with a 11.2 dBi antenna and a width of 55° horizontal span and 53° vertical span. All-in-one processor Atheros MIPS 24KC, 400 MHz frequency, 32 MB SDRAM, 8 MB Flash for AirOS operating system.

The housing is made of hardened plastic, which allows you to win the access point in the most extreme weather conditions. The optimal temperature range for the NanoStation M2 access point is from -30 to +80 °C with moisture content from 5 to 95% with condensate. Expand the access points 294x80x30 mm and the weight of the entire 400 grams, which allows you to install the choglu on the temple without any problems. Attached access points have two tie-downs, so that you can easily hold a 400-gram attachment with a long life span.

On board hotspot two 10/100 Ethernet ports If you allow connecting a call to an IP camera, as well as porting and receiving live via PoE, then there is no difference in which port to feed live, the antenna will be used for two. Next to the LAN ports there is a button to reset the settings to the factory settings, so you can reset the settings with the help of a PoE adapter to a reset button.

Life is supplied for the help of the PoE block of life, a pair is twisted over the cable for a distance of up to 50 meters. Pressure to the PoE block in the kit NanoStation M2 24V, 0.5 A with an integrated live adapter from a power surge, or you can switch to a higher PoE, or not more than 48V, 1A, otherwise it will be unsuitable for a switch.

The Wi-Fi of the Ubiquiti NanoStation M2 is often won over as a customer. It has proven itself to be good for the tightness of the antenna and the underwire polarization. Connecting a subscriber 15 km to the base station from Ubiquiti NanoStation M2 is not a problem. We are equal to the signal -75 dBm NanoStation M2 54 Mbps that secure your client with high-quality access to the border.

The access point is supported by the AirOS 5 version operating system, which allows you to work without interruption and not embarrass the client. Like all attachments like Ubiquiti-certified AirOS NanoStation M2 support all kinds of encryption, DHCP server who promotes AirMax and WDS technology, who uses a wireless robot to navit for the filthy weather minds and on the great day.

Buying Wi-Fi from the Ubiquiti NanoStation M2, you will be able to connect to the base station at a distance of up to 15 km, and at the same time you will receive an uninterrupted connection to the Internet with the help of a provider. Zavdyaki two LAN ports, which is located on the body of the access point The access point is 100% true to its price, its durability and reliability.

Features Ubiquiti Nanostation M2:

NanoStation M2 is an all-weather WiFi hotspot subscriber station courtesy of Ubiquiti Networks, a US manufacturer. Maє vlogozakhashchivaniya case that supports the standard 802.11b / g / n.
This model wins absolutely new technology airMAX, which allows you to transfer more data. NanoStation M2 has an additional Ethernet port, which allows you to connect directly to other devices, such as IP cameras, switches and other devices.
Distance up to 15 km. secure for example, connecting one local network to another method of transferring data and distributing it to the Internet.
Simply install the sensors that are located on the building itself, ensuring easy installation on the superficial mount (pipe).

The NanoStation M2 has a 10dBi dual-polarized MIMO antenna. The polarization of the antenna can be changed via the WEB interface, allowing more efficient operation in the area of ​​other WiFi mesh. The kit will include a POE-24 life block and a fastening on the sash. NanoStation M2 has the ability to work in the access point mode and in the station mode, which transmits (point-to-point) in the fallow individual customization at WEB interface.
As an access point, NanoStation M2 allows you to combine laptops, smartphones, IP cameras and other Wi-Fi attachments into a single wireless network.

As a subscriber station, NanoStation M2 is able to link local networks near the bridge to a single WiFi network.

Technical characteristics

Frequency 2412-2462 MHz
Standard 802.11b/g/n
Width at the radio channel 300 Mb/s
Memory 32 MB SDRAM, 8 MB Flash
Processor Atheros MIPS 24KC, 400 MHz
Merezha interface 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Modes Robotic Access Point, Station, Access Point WDS, Station WDS
Distance up to 15 km
Transmit pressure 28 dBm (630 mW)
Intensity 8 watts
Dzherelo Zhivlennia 24 V; 0.5A
Eating Passive Power over Ethernet
Working temperature vіd -30 ° C to +80 ° C
Water content 5-95%
Vaga 0.4 kg
Rosemary 29.4 x 8 x 3 cm

How can I hack the Ubiquiti NanoStation M2?

1. You can combine two local networks between each other via WiFi, which can be found one by one on a distance of up to 15 km
2. You can distribute the Internet (for example, unlimited) with one local measure in another country (there is no Internet or wine is expensive)
3. After scanning the WiFi network, you can connect to whether it is open or deny access and connect to the closed one (for example, the Internet provider's WiFi network)
3. The presence of an additional LAN port allows you to connect an IP camera and organize a video warning of an object, as the middle of a local network, as well as on the Internet.

Ready solutions

Head 1

1. It is necessary to combine two local networks A and B over WiFi and organize dartless transmission data on the distance up to 15 km.
2. It is necessary to conduct the Internet from point A (de Vzhe є іnternet) to point B (de no Internet)

1. Ubiquiti NanoStation M2 - 2 pcs.
2. Ethernet lightning arrester RG4 PoE - 2 pcs.

5. You need a line of sight between the attachment points of Ubiquiti NanoStation M2 from point A to point B

Danish set of grants is offered for the completion of the organization WiFi connection type "speck-speck" (bridge connection/WiFi location). Decision comply with the IEEE 802.11n standard, which allows secure data transfer up to 150 Mb/s from TCP/IP traffic up to 100 Mb/s. The solution consists of two Ubiquiti NanoStation M2 access points, which are "Access Point + Antenna" monoblocks, and do not require additional cables and antennas for organizing without a dart. Living on the Ubiquiti NanoStation M2 attachment point A and B is fed through the tie cable injector.
The number of computers that are connected to the receiving point B is recommended - no more than 6, so that the number of computers connected to greater quantity to blame them for the lack of handiness, due to the reduced speed.

Russian instruction English The upgrade of the Ubiquiti NanoStation M2 is included in the kit.

Manager 2

1. Sadiba or the apartment must be connected before dartless mesh the Internet, through any available WiFi provider in your area or locality for example Beeline WiFi
2. Office, or be it a working place, a small organization (up to 6 computers) needs to be connected to the Internet.

When is it necessary to choose Wi-Fi?

If it is technically possible to connect by the main method (adsl line is seen during the day);
- if the tariffs for the Internet service are high (for organizations or offices, the tariffs for the Internet are higher than the others, lower for private companies);
- if the Internet, which you already know, does not show your strength and stability of work.

The main pluses of connecting to the Internet via WiFi, which we propagate to the owners:

Visibility of darts;
- the ability to work with portable devices (communicators, laptops, netbooks, etc.)
- low subscription fee for legal entities (which may be to this particular type connect to WiFi as a private person);
- freedom to choose a provider, more important than the current possession (lower those that the WiFi provider himself propagates);
- freedom of movement in possession (as a result, addresses of residence are changed).

A set of equipment for the delivered plant and the necessary support

1. Ubiquiti NanoStation M2 - 1 pc.
2. Ubiquiti AirRouter WiFi - 1 pc.
2. Ethernet lightning arrester RG4 PoE - 1 pc.
3. Cable - FTP 4PR CAT5e REXANT
4. Jack RJ 45 (8P8C) (shielded) - 2 pcs.
5. Necessary line of sight between the attachment points of the Ubiquiti NanoStation M2 and the dot WiFi access provider (as a rule, the provider installs qi points on the houses of the booths, towers and know the signal by the indicator put into the attachment, it doesn’t matter from the booth, the balcony or the dahu)

After the installation of the possession and scanning of the WiFi provider, it is necessary to select the most advanced transmitter, close the attachments, pay for the services and install the payment.

Description

A productive 2.4 GHz access point from Ubiquiti. Assigned to be set by the pose of the application. Powered by Atheros 400 MHz processor, max 32 MB RAM, 8 MB Flash, 2 10/100 LAN ports.

Ubiquiti NanoStation M2 home Wi-Fi carrier-class access point. The all-weather case protects against the effects of atmospheric fallout, sawing that sony viperification.

It has a new generation processor Atheros MIPS 24KC 400 MHz and a coreless module that operates in the frequency range of 2.320-2.550 GHz. The pressure of the rest becomes 600 mW. The radius of the access point is 13+ km. Such productivity becomes possible for an integrated sectoral antenna MIMO 2x2 with a channel width of 53-55 degrees and a total gain coefficient of 11 dBi.

canalna throughput capacity access points - 150 Mb/s. The point can be two 100-megabit ports that support Passive PoE technology (in/out). This allows you to connect PoE-summed equipment to the router, as well as to work the model with an independent living room. Maximum damping - 8 watts. 802.11 b/g/n standards supported.

Access point installed operating system AirOS. The access point works in point-to-point and point-to-multipoint modes. In the zone of direct visibility of high traffic capacity (up to 150 Mbit / s) is taken from the wind 13 km. The model can be placed in the role of a sectoral base station to encourage high convergence of networks. Suitable for streaming video signal transmission.

Attachments to the compact plastic case. I will add a vaga to the chosen one to become 400 grams. The delivery set of the access point includes a PoE-injector, fixing parts, clamps and a coristuvach helper.

Characteristics of Ubiquiti NSM2

type of instalation

Street point AirMax

Robotic modes

base station/ Kіntseve client Wi-Fi possession / Point-to-MultiPoint radioomist (Point-to-MultiPoint) / Point-to-Point radioomist (Point-to-Point) / Wi-Fi repeater / Krapka WiFi access/ WiFi router

Seamless Wi-Fi roaming Dartless standards Dartless standards

One-hour operation for two bands Radio channel width, MHz

10/100/1000 Ethernet ports Quantity 10/100 Ethernet ports Quantity SFP ports Quantity USB port 3G/4G modem connection Slot for SIM card Additional expansion interfaces Quantity of antennas, pcs. Antenna design

Vbudovana, sector

MIMO trim Outside transmission intensity, dBm

28 for 2.4GHz

External transmission intensity, mW

630 for 2.4GHz

Antenna straightness diagram, degrees Antenna gain coefficient, dBi

11 for 2.4GHz

Call distance (width), m

Atheros AR7240, 400 Mhz

Jawless chip

Internal memory Flash (ROM), MB Working memory(RAM), MB Live PoE (standard)

PoE out (Passthrough)

24V/0.5A PoE

Operating system Support for the IPv6 protocol

Web interface / SSH / SNMP (read)

Kriplennya

Operating temperature, degrees

New Wi-Fi access points Ubiquiti NSM2

Internet-shop site sells goods, telecommunications, computers and trades subject to the Law "On protection of the rights of citizens". We provide professional, cost-free pre-sales advice on the right choice. On the other side there are photographs, description, price, buyers' comments, technical characteristicsі datasheet on Ubiquiti NanoStation M2 NSM2 outdoor Wi-Fi access points.

About the product

Whose goods are imported to Russia by official distributors, with obov'yazkovym formalized mitnih documents (crime of goods, issued by Russia), maє official guarantee of the manufacturer and all necessary certificates. The price is 5103.00 ₽ to apply VAT 18% (included in the option) for all types of goods, Crimea software and electronic licenses.

For physical persons

In order to get the Ubiquiti NanoStation M2 NSM2 Access Point online in the online store site - make a request through the cat or contact the manager through the form. cost-free consultation. You can make a reservation by phone ✆8-812-448-39-55 and ✆8-800-333-43-73 on weekdays from 10-00 to 18-00 and email that zamovlennya through the cat.

legal persons

For legal persons, we proponuєmo nadsilati ask for mail [email protected] website with article number, number and company details. You can make an appointment by phone ✆8-812-448-39-55 and ✆8-800-333-43-73 on weekdays from 10-00 to 18-00 and by electronic mail and through the cat. After the arrival, we give you a new package of documents for accounting. NSM2 Ubiquiti is sold both in bulk and in retail. The option of NSM2 Ubiquiti is unchangeable for legal entities and physical entities regardless of the payment method.

Delivery throughout Russia

You can request and pay for NSM2 UBNT Outdoor Wi-Fi hotspots on the site site, and pay at your own place - Moscow, St. Petersburg, Kazan, Nizhny Novgorod, Krasnoyarsk, Perm, Ekaterinburz, Ufa, Krasnodar, Novosibirsk, Rostov - Don, Chelyabinsk, Samara, Sochi, Simferopol and Sevastopol, as well as in other places of Russia. Spіvpratsyuєmo z usima transport companies.

Delivery terms

Delivery across Russia for 1-14 days (depending on the selected transport company and tariff). Delivery to the terminal of the transport company to St. Petersburg is cost-free. Bezkoshtovny samovivіz іz ofіsu in St. Petersburg (to reserve the goods, first contact the manager of the online store). At the vipadku, if the goods are not available at the warehouse, or it is taken from the warehouse, the managers will help to add the replacement for the replacement, or the analogue on Zovnіshnі WiFi hotspots access NSM2.

Vіdmova vіd vіdpovіdalnosti

Information about the goods, their technical power and characteristics, prices and propositions of telecom-sales work and offer. By accepting telecom-sales, the offer is canceled є pіdverzhennya zamovlennya іz designated goods and yogo cіni. Informing telecom-sales about the price of the promised product, which is included in the offer, є in the telecom-sales acceptance of the offer at the side of telecom-sales. Characteristics, equipment old look the goods can be changed in the appointment, and they can be changed by the virobnik unilaterally. The images of goods in the photographs presented in the catalog on the website can be re-expressed from the originals.

All reviews on Yandex.Market

5 miracle model

Advantages: Nadіyno that yakіsno Nedolіki: Long-term zastosovuє nalashtuvannya Comment: If you want to beat for 2 and more km, the possession is not for you, at great distances you can already go with straightened antennas, which is written in the characteristics is not true, but so it works without trouble , receive in loco m2 70 mb internet distance 300 meters, ping 3 ms speed all 70 calm in any weather, visibility may be straight є a couple of trees, but everything calmly breaks through the signal is clear, strong antenna, great range of channels, but only firmware from CT, corisna rich test if you didn’t set the patch correctly, then you’ll turn everything back like it’s bulo after 2 hvilin, everything is easy to set up, set up and forget

: 2.4 GHz. It will win for distribution to the Internet up to 30 subscribers or as a client on the same M2. For help, it is possible, for example, to open a chasm over a small place in an already small term. The station has recommended badly, there are simply no negative reviews about it.

Setting up the Ubiquiti Nanostation access point.

Krapka is delivered at the original box. The virobnik shows that you can win as a middle house, so call it. In the middle of the box we know a small manual, a point without a middle point, a new life block (the new models have a Reset button, which didn’t stick), a 220 V life cable and clamps for attaching to the bracket.

For connection, two cables, an injector are taken. The cable that connects to the LAN socket can be inserted into merezhu card our computer. The other cable is inserted with the first end into the POE roses, the other end at the spot. On the M2 model, 2 roses can be inserted into the main rose. If you have a version of Loca, then there will be one rose.

As soon as we feed the point, the notification indicator will light up. The LAN1 indicator does not light up, the docks are not connected to the computer. Until we got to the computer, let's say a couple of words about the point itself.

Firstly, the food is served according to the twists of the pair, which means that it is not necessary to carry out additional food to the point. In a different way, there is a vikonana made of plastic, which allows you to vikoristovuvat її in any weather. If you choose to distribute the Internet from it to the same points, then you will be able to beat the airMAX technology, as it will allow you to richly improve your business.

Nalashtuvannya

The point is connected, the computer is connected. For the cob, we need to go to the keruvannya panel and write IP handles. For locking the antenna to the address 192.168.1.20, DHCP is disabled for it. We are guilty of our authority wired connection write IP. For peace of mind, you can change the contact, that the point is pinged.

At the browser, we type our address. Login and lock password: ubnt and ubnt. For the Country column, select the Complance Test row. The language is set to English, it is accepted to understand the language and it is entered into the keruvannya panel through the “Login” button. Why did we take the Complance Test itself? On the right, in the fact that this mode allows you to select absolutely any channel, the maximum tension and whether or not other parameters are set by hand. The skin region has its own substitution for different frequencies, we want to be free people. In versions starting from 5.5.8, the Complance Test was removed, so it is not possible to flash it on it. І navpak, as your firmware is now - you can reflash to the bottom. Practice at non-standard frequencies without Complance Test is impossible. Early chi pizno whether a channel is clogged, to indulge yourself in the frequencies, as a minimum, blindly.

Let's take a look at the different modes of work, but let's take a look at the bigger speeches. Better change standard name Koristuvacha that password to the admin. Sometimes it’s better to generate passwords, if you put them in the form of baldi, then sooner or later you will forget or spend the necessary data. So minyaєmo іm'ya merezhi, tse bude korisno at monitoring. Here you can change the firmware or make me angry configuration file, you can also indicate the latitude and longevity, but I'll change it again for monitoring. Golovne, remember standard login that password, tse obov'yazkovo. Tisnemo Change and Aplly, after which the patch is fixed, and the antenna is re-adjusted, the need will be a whilinka.

Ubiquiti Nanostation M2 router mode

At a time, we can’t see the situation, if the system is installed, working as a provider. Please, we superb coristuvach. Go to the Wireless tab. So that the point worked like a router, you need to select the robot mode as an access point "Access Point". You can choose a visionary regime, so that there are no problems. SSID - name of the access point. If you work the place, then it's better to take them. Oskіlki mi robimo huge Wi-Fi, it is not prihovuvatememo. The country is left without change. Choose the width of the channel: at the same time, more will be built to increase the width of 40 MHz, and even if such divas of the Chinese thought are left out, they simply do not support the forty, so it’s a sense to change the smuga to 20 MHz. B/G/N mode is overridden, better for everything, it will not be possible to change it. You can choose a channel. Here, obviously, rozdollya. We have 13 channels in the country, which are based on the frequency of 2401 MHz. It is not recommended to use 12th and 13th channels, because the masters of apple technology, brought from the USA on a serious rank. The US has 11 channels, 11 and 12 just don't work. The first channel sounds busy, the second channel of infidelity: 2427 MHz, you can also just scan the air. We select the channel and let out the tightness. On the vіdkritіy mіstsevosti you can twist the maximum. If you are working on a non-intrusive point, we set encryption: choose the type and set the password. Tisnemo Change.

Idemo to the Network tab. We select the router mode. WAN Interface is overridden by BRIDGE0. IP is taken for DHCP. We are built into the home router and IP for antenna management will not take DHCP from the router. Turning on DHCP, IP can be redeemed or changed, it won't. Surprisingly, NAT was recognized, there is a pardon on the screenshot. Tisnemo Change.

Vіd'єdnuєmo computer vіd LAN roz'єmu that is inserted into the new cable with the Internet. We are guilty of adding your merezh to the list of available ones. Connecting to the network is changed so that the computer takes IP over DHCP.

We go into the menu of the keruvannya antenna for a new IP. Log in with a new login and password. Bachimo, that the antenna works in router mode, there is one connection - all. It is possible for the device to request an update of the firmware, but we don’t want to spend the miraculous “country”, I ignore that.

Let's move on to Main, that posterigaemo, like information for us. Є graphics of the speed, connection of the client, MAC is visible, the client signal is visible, the distance is sounded in the gap, the speed is visible, the hour of the connection, the remaining connection of the IP. Behind the first six characters of the MAC, you can recognize the dialer of the computer or the phone of the wrong person that you have connected. You can look through all the information of someone else, take the skilki and take it away.

Access point in bridge mode

In this mode, the “transfer time” point is connected and the IP can be seen from the router or the provider's switch. Which way to go, if we want to sell Wi-Fi. Billing can register MAC addresses of our clients and collect pennies from them.

Nalashtovuemo. The mode is set not as a router, but as a bridge. Here is the situation, the deacons miss it: you need to work in such a way that after manipulating the antenna you can bulo keruvati. If we choose a router that gives us an IP we want, then we install DHCP and more. And if we want to sell the Internet, we have some kind of billing, then we need to drive in the LAN address of our Ubiquiti, so that we can register it in the billing, you see, it’s a simple tariff, you can, in the fire, from the fence, go to the internet, but only see the internal IP provider. It is possible to remove the keruyuchogo IP DHCP. Tisnemo Change, nalashtuvannya on Wireless are overwhelmed, Apply, check, until the point is reset.

I'm starting to connect to the point. We already took away another IP, but we don’t know the exact IP. We go to the admin panel of our router and marvel at the clients. We know ourselves that copy IP. We go into the panel keruvannya under the given address. Login to the admin panel, reconsole, everything works. Now the IP address is controlled by our home router.

station

In Station mode, our Ubiquiti Nanostation M2 can not only transmit, but also receive the Internet. Set the Station mode and scan the air. For our "land" scanning will be long. Is it necessary? The station is more difficult, the signal can be received from a great Wi-Fi from a shack, for example. We choose whether it is available or not connected to those available and embossed Change. We see that IP is registered on the keruvannya panel, we take IP, you can go to the admin panel from the given address. Correct the IP in the middle of the admin panel, as there is no connection.