How to change the memory on a hard drive. How to reroute the resize of local disks. How to break a hard disk? Consolidation and expansion of distributions. Video: Installing Windows on a GPT Disk

Golovna / Nalashtuvannya

Meals from Koristuvach

Good afternoon. I recently ran out of space on the Windows disk - and in the third order, the pardon "Insufficient space on the system disk partition, could be the cause ..." became the anniversary. On the right, in the one on the C: drive, there is really little space - only 30 GB, but on the other D: drive - 420 GB (about 200 GB in total). Can you buy a C drive for a D drive without spending money?

PS Notebook Acer Aspire 5550, Windows 8 system, hard drive 500 GB (Seagate, I'm not fooling myself).

Good afternoon.

It is most often necessary to change the disk space if, during the installation of Windows, the necessary size of the system disk was incorrectly opened (also when buying a PC, it is often not easy to break the disk: either just one partition from Windows, or the size of the system partition is even smaller).

Vzagali, similar to the operation of changing the rozmіru rozdіlіv can be naviti without installation additional programs If you have Windows 7, 8, 10 installed (like XP - hurry up and ask for special software for formatting, splitting hard drives, see below).

I'll show you on a specific example, how to hit it ☺.

Programs for robots with hard disks (partitioning, formatting, defragmentation, etc.) -

Increased commitment of drive C:

(Actual for Windows 7.8, 10. Without spending money and additional programs)

important: to enlarge the disk C:\ - you can have a free space

on some other part of the disk (part of which I will take away)

1) Disk management

Modern Windows has a service program for formatting and splitting disks. It's called out - keruvannya discs . It dawned on us, it is necessary for us to be clear.

For whom to press the keys Win+R.

Then we can start the shukana utility.

Disk management

2) Vіdokremlyuєmo part of the free space

Now we need to select a partition of the disk, on whichever space and "select" it for a further transfer of the taken space to the "C:\" disk.

For this, right-click the bear on the selected section and select the option (in my butt it is lower - if you press the volume H:).

Now it is necessary to indicate how many free months you want to take on a disk. From my butt below, I took the figure 5000 MB (tobto 5 GB).

Pіslya moreover, yak rasdіl bude szhnuty - You're guilty, y'know you don't have rozpodіlene space on the disc (straight cut from the black female animal, marvelous screen below). Now you can come to the next section of the disc.

Chi is not divided area

3) Come to the disk "C: \" is not a separate place

Click with the right mouse button on the disk, until you want to add a space to the disk (for a streaming butt - go to the "C:\" disk), it is selected in the option menu "Expand volume" .

Note! If you have the option "Expand volume" is not active and light up with a different color (її cannot be pressed) - read the article below for proponing solutions.

Somehow, the rest of the year- wait for the operation by clicking on the "Finish" button.

Mustache! Your system disk is now larger by 5000 MB. This is Good!

4) Ah, so the expand volume tab on the "C:\" drive is not active

In some cases, if you try to expand it - this option in the case with discs may not be active (you can’t just burn with the same color and її, you can’t press it, for example, lower).

Є two ways of cherry:

  1. Try to find out zayvі rozdіli for vіdnovlennya. As a rule, it is most likely to be used on laptops, but it is specially distributed in the form of a picker. In my butt below, I will show how to see them, so that the "Expand volume" function has become active. important! In what way do you have the opportunity to update on laptops (however, this function is not all effective and reliable, and rarely helps, and still ...).
  2. Another option is to speed up specials. programs for changing the size of the HDD distribution from the following statistics:

So, I'll take a look at the first view...

You need to start a chat command line administrator's type: for which one, enter the manager's task manager (the number of buttons Ctrl+Shift+Esc), then press File/new task , enter cmd and press Enter (butt below).

  • enter the command and press Enter ;
  • follow the command list disk(All disks are shown in the system, but below - the system has one disk with identifier "0");
  • select disk 0- It is necessary to choose which disk to choose. You may have "0" instead - you need to specify the disk identifier that you need (screenshot from the butt below).

Stepping stones:

  • - marveling at all the divisions, yakі є on tsimu disk;
  • select partition 6- Choose a specific partition on the disk. To give respect, to replace "6" - it is necessary to indicate your number (change your mind, when you appear, write "Vybranium divided X").

List partition (for my view it was necessary to see 6 and 8 partitioned (which are used for updating), so that the "Expand Volume" tab became active).

І the remaining team for the remote distribution of the distribution - delete partition override. Important! Be respectful, tsya team to see the declarations, all information is gone!

To see the offensive split, you need to re-select yoga (for example, select partition 8, and then I'll re-win the team for the remote delete partition override ).

Vlasne, on whom everything is the task of virishene.

In other cases, it’s easy to finish the calculation of the necessary amount of the system distribution hard drive. Missing month on the local disk Tse mozhe bring to a significant upgrade robotic PC that Windows.

you need

  • - Paragon Partition Manager.

Instruction

1. If you don’t get enough space on the system partition of the hard drive, don’t hurry to see I work the system and install a new one on the next local disk. Establish programs that allow you to redistribute the free space between divisions. One such utility is Partition Manager by Paragon.

2. Download this program from the site http://www.paragon.ru/home. Install the utility, given the priority " No-cost version". There will be pracsyuvati dermal 30 days, ale cya whole enough. Restart your computer after installing the software.

3. Run the Partition Manager shortcut and open the Specialist Mode menu. Go to the "Maistra" tab, hover over the "Additional functions" and select the menu "Reassigned free space".

4. At the menu that appeared, click the mouse's left button on graphic image razdіlu, razmіr of what is necessary to improve. Press the "Dal" button. At the new window, check the boxes for the names of the distributions, from which the empty space will be taken.

6. After turning in the main menu of the program, open the "Metamorphosis" tab. Select "Stop metamorphosis" and reverse the launch of the program. Dochekaytesya povіdomlennya about those scho scho computer need to be revantaged.

7. Win PC reset. Check while Partition Manager is running in DOS mode. The procedure for re-adjustment of a free month can take three years. Newly reinstalled the computer. Open the menu "My computer" and change the settings, scho tsі parameters scored chivalry.

A rough disk is the main treasure on a computer. The operating system itself is installed on the new one. It is important to have more coristuvachiv laptops and computers to choose a rough disk of sprat parts. Save for saving the main files in different operating systems.

you need

  • Windows 7 installation disk
  • Paragon Partition Magic

Instruction

1. It will be meaningful to reconsider place in formatted zhorsk disk that do not take revenge on any information. The work with an empty disk takes significantly less than an hour and lowers the number of pardons for an hour later. It is recommended that you separate the disk before installing the operating system.

2. Insert the Windows 7 installation disk into the drive and start the OS installation process. If you see a choice of a local disk in front of you, on the one where Windows 7 will be installed, select a partition, which one you want to expand or change, and press the “vidality” button.

3. Repeat this operation with another division, which takes the fate of redistribution of space. After that, press the item “growth” and indicate the size of the distribution. To grow those for the creation of another division.

4. If you need to change the partitions after installing Windows, then you need the Paragon Partition Magic program. There is a good-natured interface and a great set of functions. Select the software version according to the type of your operating system.

5. Run the program and select the mode of confirmed chirp. Go to the menu "Transferred a free space between divisions". Indicate a sprinkling of a hard disk, with which you continue the work. Press the "Dal" button.

6. Tell the rozmіr rozdіlіv zhorsk disk, zastosovuyuchi bellows. Press "Dali". If you need more credit, if the program allows it, then I will manually delete the downloaded files from the distribution.

7. Press the button "suspend metamorphosis". The computer will reboot and continue the operation in MS-DOS mode. The process of redistribution of free space can take three years.

you need

  • Partition manager.

Instruction

1. Finally, the most primitive way to add a charge to hard disks is to buy a new hard drive. This decision helps in the situation, if there is a misfortune in the month, there are secondary distributions.

2. As well as it is necessary to increase the disk space on the smaller essential branches, it is necessary to go another way. If it is necessary to slightly increase the size of the local disk, you can tweak standard function Windows.

3. Press the Win + E keys to open the My Computer menu. Right-click on the mouse on the local disk, on whichever you want to increase, and go to the “Power” item. Activate the function "Squeeze Danish disk to save money” and press the “Stop” button.

4. Sometimes it is necessary to expand the distribution on a hard disk before installing the operating system. Vinyatkovo is important for the transition from Windows XP to Windows Seven. Insert the Windows 7 installation disc into the drive and start yoga.

5. At the last moment, the process of installing the dide before choosing the distribution of the hard drive. To add the menu of additional actions, press the button "Disk setup". See the distribution that you plan to increase, and press the "View" button.

6. Repeat the following procedure for the division, depending on which area is selected. Note: admissible, you already have no vicorists place on disk. At this time, it is not necessary to see another division. Press the "Create" button, specify the file system and size of the future volume. Similarly, sprout the 2nd disk.

7. If there is a need to change the layout of the distribution, working in the middle of the Windows operating system, recommend victorious special programs. Let's take a look at the Partition Manager. Install this program and run it.

8. Go to the menu "Strіmka metamorphoz rasdіlu". Indicate two local disks, between which will be allocated a free space. Press the button "Dalі" and enter the expansion of upcoming expansions. Tsey way allows you to work with discs without formatting, it is recommended that you vicorate yoga like a smut.

Video on the topic

Most of the coristuvachiv sounded like two partitions on one hard disk, call the disk under the name C and D. Windows installations otherwise) that third-party cost-free programs.

Speed ​​up with Disk Management

  • Open the utility by right-clicking the mouse on the Start menu and selecting Disk Management.
  • In a row I will search the "Start" menu, search for "Control Panel", open it.

Select the "System and security" item.
At the top, as it turned out, in the "Administration" item, click on the "Creation and Formatting of the Hard Disk" sub-item.

Shrinking volumes, zvіlnennya mіstsya for the creation of a new distribution of Windows 10

In order to create a new volume in the utility, it is necessary to take a handful of space here for this, you can squeeze the space on the already existing volume. In the Windows operating system, one physical HDD can have no more than 4 partitions, including system partitions (for example, expansion partitions). Play two local disks 3 and D.

In order to create the third volume, you need to click RMB on the partition, on whichever is more free, ours will have disk D. To appear at the window of the conductor, click on the “Squeeze volume” item, to call the free space, change yoga on unmarked.

Partitioned D for the creation of a new volume.

The next time you appear, write “Experimentation is being made to designate an available space for embossing. Check..." The process can take from as many seconds to as many as tens of minutes.
If the system finishes the volume of the volume, it will show up again, at the column “Design to that which is squeezed” it is necessary to indicate how much space it is necessary to add a donor disk to create a still free space. Seeing the new space more space, lower appointed, do not give in. At the butt on the screenshots between 78880 MB, three more than 77 GB.

You can specify whether or not the number is less than the designated volume, for example, by setting the value to 51200 MB, you see exactly 50 gigabytes for the new volume. If you select the “Squeeze” item for an hour, the result will not be good. In order to reverse the process of squeezing, it is necessary to hover the cursor over the utility window, the blue circle is to blame, which wraps around. If in the lower part of the sky a black woman appears with an indistinguishable expanse, we will talk about those who have become constrained.

In this way, there was a space for creating a new volume on the HDD in Windows 10. Now the unsplit space needs to be converted to a new partition of the hard drive.

- Creation of a partition of a hard disk from an undivided expanse

It is necessary to right-click the mouse on the area with the inscription "Not distributed", select the "Create a simple volume" item.

You need to say "Master of the creation of a simple volume", press "Dali", the next one will need to indicate the size of a new volume. You can not change the value, otherwise, if you want to create two divisions, or more, indicate the value less. Press "Dali".

After that, choose the Latin letter, which means the disk, for example, F. We choose the letter, press “Dali”.

Then we will be able to format a new distribution for different needs.

Continue pressing "Done".

In a few seconds, the volume has been formatted and a new partition of the Windows 10 hard drive will be created. If you choose the amount of memory, if you want to see the creation of a new one, it is necessary to ensure that a small amount of cramped space will be taken away by Windows for system consumption.
So, when choosing 50 GB of memory, we took away a total of 49.9 GB.

Creation of distributions within the hour of installation of Windows 10

Under the hour of installing Windows 10 on a computer from flash drives or disks, you can split disks into volumes. For those who install the operating system, it is necessary to insure that you have brought data from the system distribution to a remote location.
At the time of Windows installation, after entering (or skipping entering) the activation key, select the "Custom installation" item, after which it will be possible to select a distribution for installation, tools for setting distributions are available.

At times disk Z - partition 4.
In order to split two HDDs from one HDD, you need to split the "Vidality" button for an additional button, as a result, the wine is converted to "Unoccupied space on the disk" (point 4).
Then choose an unoccupied space, press the "Create" button, set the size of the upcoming "Disk C". After this creation, you will be left with a free space, which you need in this very way to transfer to another partition of the disk.

If you create another partition, it is recommended to see it, click on “Format” (if you do, you may not show up at the Windows 10 explorer after installing Windows 10 and you may have to format and recognize the letter through “Disk Management”). Then, choose the one that was the first to be created, press the “Next” button to continue the installed operating system on drive C.

Programs for splitting disks into splits

Krim vbudovanih Windows Tools, I have a lot of software for robots with distributions on disks. One of the best cost-free programs is Aomei Partition Assistant Free and Minitool Partition Wizard Free.
For the beginning, you need to download the Aomei Partition Assistant program from the official website, install it on your PC and run it. The program can't choose a Russian language, not a system disk, in the case of "E".
Click on the new RMB, click on “Change the rozmіr razdіlu”.

To show up vibranium obsyag memory, our memory has 15 GB.
Right-click on the system local drive C, context menu select "Change the rozmіr razdіlu".

Pull the bungee to the right again to required expansion, otherwise, set the required space for expansion in the "Unoccupied space for the next" field. Please appear early to create a way to update the Windows 10 system or backup copy third-party tools, emboss "OK". In order to save the change, press "Zastosuvati" at the upper left corner.

Let me know that there will be a re-advancement, at some hour there will be an angry disk C with an unoccupied space, select "Go". You will be prompted that the program will work in PreOs mode, press "So".
pochnetsya Windows reboot 10.
After the first attempt, the AOMEI Partition Assistant PreOS Mode will start.
The process of vikonannya zavdannya will start to recover.

As if working with Windows, you got stuck due to the need to increase the size of disk C for disk space D (or split it with another letter), in these instructions you will find two free programs for these purposes, and about those, how to do it. Become in a better position to be able to, so that you will be aware of those that Windows is not enough memory, or the computer has become a gamble through a small free volume of the system disk.

I’ll designate that I’ll go about zbіlshennya rozmіru rasdіlu C for rahunka razdіlu D, so that the stench is guilty on one physical hard drive or SSD. І, ozumіlo, that space of disk D, which you want to get to C, is to blame but you are free. Instructions for Windows 8.1, Windows 7 and Windows 10

Unfortunately, the standard Windows it is described how to change the structure of the partitions on the HDD, you won’t be able to do it without wasting data - you can squeeze the D drive in the disk management utility, but if there is a “after” disk D, you won’t be able to save C for the new disk. That's why it's necessary to get into the use of third-party tools. Ale, let's also talk about those, how to increase the disk C for the disk D and without using the program, for example, the statistics.

Increasing the size of C drive in Aomei Partition Assistant

First of all, free programs, to help expand the system partition of the hard disk or SSD - Aomei Partition Assistant, which, moreover, is “clean” (does not install additional non-standard software), and supports Russian language, which can be important for our koristuvach. The program works on Windows 10, 8.1 and Windows 7.

Caution: Wrong actions over the partitions of the hard disks or poor power supply during the hour of the procedure can lead to wasting your money. Pick up about the conservation of what is important.

After installing the program and starting it, you will have a simple and intelligent interface (Russian language is selected at the installation stage) so that all disks on your computer are displayed and distributed on them.

AT this butt mi zbіlshuvatimemo expand disk C for rahun D - tse most expansions variant of the task. For whom:

Upon completion of all operations and two re-advantage (sound for two hours to lie down due to the employment of disks and the speed of their work), you take away those that you wanted - a larger size of the system disk for the change of another logical partition.

Before speech, at the same program you can work zavantazhuvalnu flash drive, to beat Aomei Partiton Assistant by getting involved with her (do not allow to beat Aomei Partiton Assistant without re-winning). You can also create the same flash drive in Acronis Disk Director, after which you can change the size of the hard drive or SSD.

You can download the program for changing disk partitions Aomei Partition Assistant Standard Edition from the official website http://www.disk-partition.com/free-partition-manager.html

Change system partition size MiniTool Partition Wizard Free

Another simple, clean and cost-free program for changing partitions on a hard disk is MiniTool Partition Wizard Free, which is true, on the front view, it does not support Russian language.


When you start the program, you can use the same interface as in the previous utility, the one necessary for expanding the system drive C with some free space on the D drive will be the same.


Right-click the mouse on disk D, select the context menu item "Move/Resize Partition" and change the partition so that the space is not divided into "left-handed" as the one occupied.


After that, for the help of the same item for disk C, zbіlshte yogo rozmіr for rahunok vіlny mіstsya. Click OK, and then click on the head window Partition Wizard.

In addition, as all operations on the partitions will be disabled, you can immediately check the change in the Windows explorer.

You can download MiniTool Partition Wizard Free from the official site http://www.partitionwizard.com/free-partition-manager.html

How to make disk C for disk D without software

The only way to increase the free space on the C drive for the real space on the D without using any programs, only Windows 10, 8.1 or 7. to transfer, as if the stench represents value). If this option is in your power, consider typing the Windows + R keys on your keyboard and typing diskmgmt.msc after what to type OK or Enter.

You can use the Windows Disk Management utility, in which you can connect all the connections to the storage computer, as well as distribute these storage drives. Give respect to the distribution, which should be given to C and D discs (be it by attaching branches, which is on the same physical disk, I do not recommend).

Right-click on the mouse on the partition, which confirms disk D and select the item “View volume” (I guess that you can see all the data from the partition). If you leave the right-handed drive in disk C, it is not possible to occupy any space, which can be used to expand the system partition.


To expand drive C, click on it with the right mouse button and select the "Expand Volume" item. If you want to expand the volumes in the master, then expand the volumes on the disk space (behind the lock, everything is clearly visible, prote, I suspect, you need to deprive it of gigabytes and for the D disk). On the screenshot, I have a larger size of 5000 MB or less than 5 GB. When the robotic master is completed, the disk will be expanded.


Now the rest of the task is gone - turn the unoccupied space, which is left out, into disk D. For this, right-click on the mouse on the unoccupied space - “create a simple volume” and vikorist the master of creating volumes (for closing, vіn zadiyaє all unoccupied space for disk D) . The disk will be automatically formatted and assigned to the specified letter.


Axis and everything is ready. Lost to rotate important data (like stench boules) to another partition of the disk from the backup copy.

How to expand the space on the system disk

So, although it was not clear, the following video instruction was shown, in which two ways are shown to increase the C drive: for the D drive size: Windows 10, 8.1 and Windows 7.

additional information

In the descriptions of the programs and other related functions, which can become useful:

  • Transferring the operating system from disk to disk or HDD to SSD, FAT32 and NTFS conversion, updating partitions (in both programs).
  • The creation of a Windows To Go flash drive from Aomei Partition Assistant.
  • Rechecking the file system on the surface of the disk with the Minitool Partition Wizard.

Zagalom, dosit korisnі that sruchnі utilities, I recommend (though it's true that I recommend it, but through the program the program is potentially overgrown with software security, so be careful about it. At the moment everything is clean).

If you have administrator rights, you can re-partition the hard disk partition for the additional function of squeezing in the disk management program. You can squeeze the main partition in order to create undivided disk space, on which you can create a new partition (reveal that the terms are divided and often interchangeable).

  1. Vіdkryte distributed "Keruvannya by computer". For whom to press the button Start, wrap components sequentially Control panel, The security system, Administration, and then double click item Curation by computer. It appears that you will be prompted to enter the administrator's password or confirm it, enter a password, or enter confirmation.
  2. At the left panel at the branch Memorable annexes press Disk management.
  3. Right-click the mouse that you need to squeeze, and then choose a command Squeeze tom.
  4. Check out the instructions.

Notes:
Here, under the "Squeeze" function, Windows can change the size of the distribution (volume). First, proceed to squeezing, be aware of the list of minds necessary for squeezing. Shchob otrimati dodatkovі vіdomosti, on the menu Dovidka select item Viklik dovidki, go to the tab Poshuk, enter Embossing the base volume and press the button Distributed.
As if there are a sprig of divisions on the disk, you can see one of them and create new divisions in the open space. With the remote distribution, all the information that is saved on the new one will be reduced.
You can also redistribute the partition of the disk for help third party software division management. Deyakі third-party virobnik proponoyut programs, yakі give zmogu zmogu razdіlyat razdіlyat zhorstі disk without vidalannja іnformatsiї.

Below we can look at the butt of the seen and the creation of the cuts
As described above, it is included in Disk management.

Malyunok 1

On the Disk 0 size 465.76 GB Bachimo 4 distributions. To return respect, that the fourth parted Fє logical disk, roztashovany at the supplementary branch. Additional container, which has a logical disk F.
For accuracy, we will put a task - see the divisions Dі F and in the future, create one division D.


Malyunok 2

Hover the mouse cursor on the section F and press the right mouse button. From the menu, select "Vidality Volume".


Baby 3

Vіdkrivaєtsya vіkno іz poperedzhennyam "Vidalennya nischit vіdі danі on tsomu volі". Before leaving, archive all data, as it is necessary to save. Do you want to continue? At the right time, press the button So.


Malyunok 4

Logical disk F pishov, - the place of supplementary distribution was left in the field. Let's proceed to the end of the final division.


Malyunok 5

We hover the mouse cursor on the place of the supplementary distribution F and press the right mouse button. At the menu, select "Vidality split".


Malyunok 6

Vіdkrivaєtsya vіkno іz in advance “Tse dodatkovy split. If the remote distribution will be unavailable. Do you really want to see the split? At the right time, press the button So.


Malyunok 7

The supplementary partition was seen, - on the yogo mist, the expanse of the hard disk was left undivided. Similarly, we can see the main division D.


Malyunok 8

As a result, there will be no separation of the expanse of the hard disk, on which it is possible to step over to the creation of a new division.


Malyunok 9

Hover the mouse cursor over the distribution of the hard disk space and press the mouse button to the right. From the menu, select "Create a simple volume".


Malyunok 10

The window “Master of creating a simple volume” appears, - we press the button Dali.


Malyunok 11

Oskіlki vyrisheno all undivided disk space, which is empty, take up the creation of the partition, we need to reserve for locking "Size of a simple volume (MB)" without changing, - we press the button Dali.


Malyunok 12

Assign the letter to the partition (as it is not significant, then the partition will not be visible in the "My computer" window), - press the button Dali.


Malyunok 13

We set the parameters and formatting and press the button Dali.


Malyunok 14

We press the button Ready.


Malyunok 15

I love the result.

Malyunok 16

Vіdkrivaєtsya vіkno autorun - vіdkrivаєmo i koristuєmosya.

And at the end I want to note the special features of the expansion and the embossment of the divisions.
First, check out these operations, reconsider that in the settings of the Disk Defragmentation service, the startup type is set to "Manually". As if the service was suspended, when you try to change the rozmir, you will take a pardon: “The service was ordered but it could not be started, the shards are turned on, otherwise everything connected with it is attached to it.”
The partition can be expanded only for the size of the undefined area on the hard drive, which is the sum of it.
A non-delimited area can be taken away as a view of the distance, or as a limitation of obvious divisions.
It should be noted that an undefined area can be selected for expansion only in a small number of divisions, as to be known from it on one physical hard disk.

For example, - for expanding the division C (if the wine is not summed up with an undefined area) it is necessary:
Squeeze partition D onto the insoles on the floor as possible, create a new partition near the undefined area that has appeared, move the information there to the partition D (so that it fits there), see the partition D, and then expand it to the required size, expand it Assign the division to the letter D and expand it to an undefined area that is left out. The axis is such a folding process.

redistribute the space on the local drives, x. That is the functionality of this tool - a practically lightened version of such programs as Acronis Disk Director, Partition magic and other programs for disk cleaning. And now I'll show you how to deal with them...

Disk management in windows 7 guiding tool that allows redistribute the space on the local drives, see local disks, create x. That is the functionality of this tool - a practically lightened version of such programs as Acronis Disk Director, Partition magic and other programs for disk cleaning. And now I'll show you how to deal with them.

My plan is this:

1. Change the local disk D to 50 GB.

2. For the time of the day, when you are born, create a new local disk with a size of 25 GB.

3. For 25 GB, which is lost, zbіshiti tsey, I'll re-create the disk.

4. Turn everything back to its proper place.

The tool for cutting discs can be known for offensive address: Start - Control Panel - Administration - Computer Management - Disk Management. The upper block has a list of local disks, the lower one shows the list of places between them and all connected drives.


To change the local disk D, click on the new one with the right button and select the item “ Squeeze tom... ". To show up like this


And then let's do it.


At this vіknі vіbiraєmo skіlki nebhіdno squeezing the local disk i vіdrazu can bachіti sіlki mіstsya to be left on the disk. Otzhe, we introduce rozmir, which will be squeeze the disk and pressing " squeeze».

After the day of the hour in the lower part of the window Disk management"The black area is terrible to appear, but don't fawn, everything goes according to the plan.


Tse black area, undefined area of ​​the hard disk.

The first point of the viconano plan, let's move on to another: Creation of a new local disk size 25 GB. For this in this black region, press the right button and select the item “ Create a simple volume... ". It says "Master of making a simple volume"






I axis of "Ulyalya".


Everything has gone. New local disk with a size of 25 GB. created. Moreover, as soon as the wine is created, you will be asked to vodkriti yoga, you have inserted a disk or a flash drive, it’s good.

Let's move on to point 3: Instead, create a local disk in the free space, which was left behind. For which one is pressed on the new disk, right-click and select the item “ Expand Volume... ". The “Volume Extender Master” window appears




Otzhe, the last stage, turn everything back, for whom it is necessary delete local disk“Ulyalya” and expand disk D. To open the local disk, right-click on the required disk and select the item “ Vidality Volume... ". We will be warned that all data on which disk will be lost.


We'll be fine. And the undefined area is reestablished. And to expand the disc of the rachunok of an undefined area is already possible.


I would also like to say that it was not possible to expand the disk 3 of the windows of the undefined area, so you can expand the local disk only if the area is undefined - the sum of it. Tobto tsya black area can be entrusted with a local disk S. Ale solution є, let's go and troch "hemorrhagic".

To expand drive C (in my situation, if the vins cannot be combined with an undefined area), it is necessary: ​​squeeze the local drive D on the insoles, it is possible to create a new volume, move the information there from the D drive, delete the local drive D, expand local disk C, then assign the new created partition to the letter D and expand it on the disk. The axis is such a long process ... Good luck!

The article was taken from the official journal: http://www.goodkomp.com/page/upravlenie-diskami-windows-7#1

A lot of corystuvachіv personal computers and laptops are sticking with the need for sprat parts. We can also correct for the final analysis of the functions of the other parts: for example, one virtual disk will be occupied by the system and time files - cache, on the other side the games will be placed required software, and the third one will become a treasure trove of media content. In this article, a help is presented, how to split your hard disk into parts using Windows 7 and for additional third-party programs.

Seeing a virtual (or physical) hard disk under the operating system is more convenient. First of all, you can't inadvertently “fill up” the system disk with files that can be upgraded to a robotic computer. In a different way, as with the Windows system, you can get away and when you reinstall it, you can format it - all your photos, movies, books, music and documents do not get stuck, even if the stench is not stored on one disk with the system.

In addition, you can save a lot of information different expansions, To optimize the machine search for large and small files, place them on different partitions of the hard drive. It is important to speed up the search for the file you need.

Podіl pіd іnstаlіtії Windows

Most of the time they have not installed the system, which method is the most correct. Breaking the hard drive to the distribution will be before installing on a new Windows for additional special utilities that are saved in the installation image or on the disk. Presented here is the insurance policy for coristuvachiv, so that you can already install the operating system:

  • Get from the installation disk or flash drive;
  • Dock the beginning of the installation of the operating system;
  • Select the language of the installation and press "Install";
  • Get to know your minds license area, confirm your success with them and press "dali";
  • Select a new installation of Windows 7;

We have reached the moment, for which the process of the hdd under the part is being repaired. If the disk is already split into sprats, and if you want to change its structure, the most correct solution will be to see them. It is necessary to remember that all the data that are on the annex will be irrevocably spent. If you have added new information, you will have more than one. Yogo is also visible.

Now you have the resources to expand new distributions, it's called "Unoccupied space on disk 0". Press the "Create" button and select the size of the first part. As a rule, the wine will win as a system one and you will see 50-100 gigabytes of spare space for your needs and the size of the physical hdd. Similarly, create the other necessary for you. Please be sure that Hdd with MBR record type cannot break more or less parts.

Podіl standard Windows 7

Before the advent of the "Simka" similar to the others, it was possible to turn on the help of third-party software. This version now has system utilities for dividing hard disks into parts. For the help of standard Windows 7 tools, you can divide the disk into a sprat of parts, change the size of these parts, see or merge the sprat into one. The order of presentations to the helper.

On the back it is necessary to defragmentation. There is no sense to go into details of the process, but, rudely seeming, you sort and sort all the files on your disk.

  • Go to "My computer", right-click on the icon of your hdd and select "Power".
  • Open the "Service" tab and press the "defragmentation" button. Check until the process is complete.

Now you can proceed straight to the bottom:


  1. Go to the "Start" menu, right-click on the item "Computer" and select "Keruvannya". Similarly, you can right-click on the “My computer” icon on the desktop.
  2. At the menu of caring with a computer, select "Care with disks".
  3. Right-click on the mouse to select your hard drive and at the menu, go to the "Squeeze volume" item. Check the current hour, the docking system will calculate the possibilities for squeezing the space.
  4. Tell the rozmіr space, scho squeeze - tse those space on the disk, yak you take it from the system partition. 50-100 gigabytes for the whole system is sufficient, otherwise you can boldly squeeze.
  5. After squeezing, having settled the undivided space on the disk, it is necessary to select yoga, right-click on the mouse and go to the “Create a simple volume” item.
  6. At the maestri, as you have seen, go through the completion of the expansion of the future distribution of the world (everything is more accessible, if you only need one, or just one part, then we can create a new world). Press "Dali".
  7. Here you can choose the name or the letter for the future distribution. Say whether it’s fit and press “Dali”.
  8. Select "Format volume" and enter the NTFS file system. Press "Dali".
  9. Check the current hour and complete the work of the master for the help of the Done button.
  10. If you need to create one more division, repeat steps 5-9.

Now your hdd has been divided into a split spice. You can go to "My Computer" and ask for help from the explorer.

Help Acronis Disk Director

This is a hard utility, as it is often challenged by system administrators. This functionality significantly overrides the standard Windows features. To work with the program, it is necessary to get it installed. Which helper has the following order for the Suite version:

  1. When you first start the program, it will prompt you to select the work mode. Enter manual mode.
  2. At the menu of the animal, select the category "Maistra", and in the item "Creation of the distribution".
  3. Indicate a hard disk, which is necessary to break it into sections and press “Dali”.
  4. Here it is necessary to indicate, from some of the most important parts, there will be positions of space for a new one. Shared, signed by "Acronis Hidden", cheating is not recommended - it can lead to a breakdown of your operating system. Press “Dalі” and check until the system has enough space for posting.
  5. For the help of a bellow, it is necessary to fix the bazhan rozmіru of your future distribution and press “Dali”.
  6. Select "Logical" disk type and press "Dal".
  7. Here you need to specify the file system. You need NTFS. Press "Dali".
  8. On this croc you can choose a letter for distribution. It was worthy of saying and typing "Dali".
  9. Press "Finish" and check the completion of the process.

Now your disk is divided into 2 parts and you can beat them to your own discretion.

The new operating system from Microsoft, which has passed through the final stage of release, called out super-clear remarks from the core. It's not surprising - the company from Redmond has already been close to two decades as a monopoly on the home computer software market, and with its growing popularity, the number of criticisms is naturally growing. We want that chi ni, ale zgodom Windows 10 become a new dominating operating system on the market, the sensor will adapt to it already at once.

One of the most requested aspects of the work, be it operating systemє disk management - here you need to acquire knowledge to be like a pro, and for ordinary coristuvachs - you need to expand the zhorst disk vinikaє in usіh. Luckily, Microsoft was streaming its fuse at the right place to stuff its new OS with impersonal innovation, inspired by its own decisions in the distance. Rich in why it appeared and in the management of such an element, like a hard nose - a miraculous organization of the interface of the positions front version- 8.1. The robot, which borrows at once the first place for the popularity of Windows 7, the robot with a memory similar to that of version 10, will be given the article for a richer number of coristuvachiv.

It’s possible to stop only third-party software’s attachments, but, as practice shows, this trick (like buying a license) is not true for a peppered coristuvach, and for most of them, a part of the possibilities is marginally low - the need to share a hard drive is very rare.

For the beginning of the work with noses (it doesn’t matter, if you want to expand, redistribute or remove it), it’s necessary to open the program, calling it in the 10th edition of the OS, it hasn’t changed yet from the “sim card” - “Disk Management”. For whom is it necessary to vikonate such manipulations:

  • In a row, the “Start” menu is joking.
  • Click on the item "Administration";
  • At the window, select the label “Computer Management”;
  • Why choose "Disk Management".

Below are slides, which show more descriptions of the thumbnails


Control panel - Administration


Curation by computer


Disk management

Creation of a new volume in the free space


On the screenshot you can see the window of the program and the list of available for changing distributions. To create a new one, you need to click on the end of the disk and select the item “ Squeeze tom". In our opinion, it’s more difficult for the “D: drive” - there is more space in the new space, and such manipulations with the system partition are not recommended.

Why "squeeze that" yourself? Expansion on the disk may be surrounded by character, take it again, do not see it. So, as we have a large number of divisions between disks, which we already know, the main option is to divide the memory for division. Another way to propagate to be quicker in an unrecognized area (it also seems to be in this list), or to format one of the divisions, to see yoga and in the undefined area, which has been settled, to create two new ones, acceptable to you, to the world. Warto respect that in the rest of the year all the data will be spent, which are saved for this volume, that the best way to see it on the screenshots is the most convenient one.

After activating the "Squeeze volume" item, it will appear in the window, in which the system will ask you to show patience to check the sprat of fines. After that, on the screen you will see information about the maximum volume for a new volume - ours has less than 77 GB. Koristuvachev will be asked to independently choose the expansion of a new distribution, which lies in the boundaries of the appointments earlier than 77 GB. We choose 51200 MB - definitely 50 GB.


Space can be victorious for transparency in cataloging your data or parallel installation other operating system.

After the value is set, press the “squeeze” button and check. The hour of recovery can vary quite a lot - on SSD-disks, the process of getting a loan is slow, on older machines - a couple of times longer (shortly hoarding money is significantly charged for the speed of work). When the process is completed, you should note the improvement on the diagram below - in the middle of the blue males, which mean the discs, the black will appear with the mark "Not redistributed".

Creation divided

After squeezing the free memory on a hard disk, the very hour of opening the creation of a new division. In Windows 10, the password is fixed by clicking the right mouse button on an undefined area and activating the item “ Create a simple volume».


Bude vyklikano " Master of the creation of a simple volume”, for the help of some kind of koristuvachev, it will be proponated to cherubate the volume of the volume. Behind the locking disc, the meaning of the expansion of the free space is set - yogo varto change less in that case, as your plans to create more, lower one disc. It will also be required to choose the name of the volume label, after which the parameters and formatting of the partition are specified. It is recommended to use the values ​​set in windows for locking, then press "Format". Now you have received your order of the new volume.

The windows of disk management in Windows 10 are similar to “simts”, then it’s worth watching the video on how to split disks in Windows 7.

Why is it necessary to expand a hard disk in Windows? We are in front of you for the safety of your special tributes. If the hard disk has only one partition, all files, like on that disk: programs, documents, photos, files of the Windows OS itself, are saved in one place.

Now you can see that the system has a problem. All your special files (photos, documents) will be used with great care. It's better if the files of the system and the files of the coristuvacha are saved only one type of one.

Physically, the stench, like before, will be left on one hard disk, but will be on other yogo distributions. Razdіl_v can buti kіlka. One, as a rule, enters the operating system and programs (system partition), the other (otherwise) - the files of the koristuvach.

One of the simplest available ways- expand the hard drive for the hour of Windows installation. As tse robiti, we have reportedly and on a specific butt rozіbrali. How to work, as the system is already installed and in the files of the koristuvach, how to split the disk in such cases?

How to split a disk installed system Windows without wasting money

Today, we’ll figure out how to split a hard drive into two or more splits from an already installed OS. Moreover, it is not important, which edition of Windows you are correcting. This method will be relevant for any version, whether it be Windows 7 or Windows 10. If you already have two splits, it’s necessary to create a third offensive method, as described below, so it goes.

In fact, our task is to start to “pinch out” the great partition (and in our case, the only partition is the system disk C) as a part, let’s say 200 GB, and rob it of a large partition.

You can use a lot of ways, including for the additional Windows operating system, as there is a special tool Disk Management (Disk Management). Tsej sposіb vimagaє minіmum zusil i zdebіlshoy vіrіshuє put zavdannya without third-party software. Let's start from the very beginning.

The first step is to proceed to the distribution of the hard drive with the installed Windows system, it is necessary to live in some foreign visits. How about the system? important files- back then copy them to your spring nose (flash drive, old zhorsky disk).

How to divide a hard disk into two or more divisions? Method 1 - using the Windows system

Install the Disk Management tool. In Windows 10, just right-click on the icon My computer, select item management - Disk management.

In others Windows versions danish tool you can find out if you need to find a victorious key or use a combination of hot keys Win+R, then enter the diskmgmt.msc command.

Before us is a vikno Keruvannya with disks, de displayed a disk of a koristuvach to this particular type max size 465.76 GB (Disk 0). Almost the entire HDD space is allocated to one partition - Disk C. There is also a present partition (500 MB), which is reserved by the operating system at the stage of installation.

In our case 465 GB (the entire hard disk) for one system disk, no expansion is allowed, for that it is possible to see the maximum possible (how much the system allows) the amount of GB and it is possible to expand it from this free space.

As a rule, for a system disk, you should add about 100-150 GB. Here everything is deposited in the form of a specific koristuvach. 100 GB is enough to install Windows and the most necessary software on the system disk. If it is planned to install modern games as an addition to the system, then expanding to 100 GB will obviously be insufficient.

Before that, how to perform an operation on a specific section of the hard disk, do not forget to see it. Finish clicking on the new left key of the mouse and split the selection. Just then, proceed to the operation.

Let's move on to practice. Vibero divided it into any necessary space. Right-click on the selected branch and select a command Squeeze tom.

All dimensions are in megabytes, please be careful. For a specific application maximum number MB, as the system "allows" to squeeze - 237.656 MB (232.09 GB). Tse means that after squeezing it is possible Disk size 232 GB and Disk D - 238782 MB (233 GB). not himself optimal option. If you are not in power, and you need to “pinch” more, lower the system, then you will have to win third-party software, but about the same thing.

If all the pranks are over, then the expansion of the possible divisions of the tasks is onslaught OK(or click Enter). We have a new distribution of unknowns (200 GB). Do not rush out of Disk Management. The procedure for partitioning the disk into two partitions has not yet ended. We see a new partition (200 GB) and click with the right mouse button, we select an item Create a simple volume.

run Master of the creation of a simple volume. In principle, everything was simple, it was enough to get to the point of the master himself. Find out with screenshots. It is necessary for you to set the letter for the future partition (for my type D) and the file system - NFTS.






We wonder what happened. We may have one hard disk and divided it into two parts: the system Disk C (265 GB) and the New Volume D (200 GB) for saving special data. Speaking of which, the new volume is now showing up in Windows Explorer.

Now you know how to split a hard drive into two and more partitions using Windows. If your way of power and wine has run into your tasks, then on whom you can chime in. However, if you are looking for a larger optimal option, and, for example, you need to “pinch out” a larger size, lower the system itself - a victorious third-party software. It's true, we need to turn our backs zhorst camp disk.

Apparently, the creations have been divided and rotated by the system disk. We see New volume and right click mouse point Vidality Volume.

Read ahead and click OK. We take 200 GB, as it is not distributed.

Respectfully check all the numbers and click Dali.

Mi turned up I will become if there is one hard disk in the system and it is practical to add one partition (system).

How to divide a hard disk into two or more divisions? Method 2 - Partition Master Free

It's time to go to third party software. Here the choice is great. There are paid and no-cost options. I recommend zooming in on . Why? Perverted by the hour, intuitively intelligent interface without cost. On the view of the Disk Management tool, which supports Windows, Partition Master allows you to squeeze the partition of the disk, docking is physically possible.

The official website of the program is www.partition-tool.com. Go to the site and select from the top menu of the partition Products - Partition Master Free - Download.

Oskіlki the program is cost-free, during the її ії її ії ї ї ії ії ії ії ії propoponovannâ vstanovlenya podatkovykh neprozhanyh programs. A lot of free-products are miraculously processed, and miraculously they make their own factory, but the shards of the stench are without bones, the retailers try to earn money on them. Be respectful and uncheck the checkboxes from the proposition of advertising products.

1. Start the installation of the downloaded program. language is selected English that onslaught OK.

2. It'll be fine for the coming future, we'll win software security only for your own family, check the box and press OK.

3. At the advancing vіknі (on the ruling court) only one checkmark is left - Create a desktop icon(create an icon on the working style) and press NEXT.

Installing Partition Master Free in screenshots. click






5. At the next vіknі enter your own Im'yaі Email. You can enter predictive data.

6. After the installation is on the press Finish.

The program may start. Interface rebuilt on English, ale vіn dosit simple and for the help of these instructions, split the disk from Partition Master Free not in a warehouse of special difficulties.

In the main program, the program displays Disk C, which needs to be divided. The basic information is also presented here: file system (NFTS), rozmіr - actual (465.27 GB) and victories (17.10 GB). Return respect to the graphic scale of the disc, ruffled in the lower part of the window. Pratsyuvati and vikonuvati commands, you can vikoristovuyuchi offending options. With a graphical scale, the work of the three is simpler and more precise.

Go to the section (click the left key), which is necessary to divide (in the form of which you need to select the area), and select the item in the list of commands (Change rozmіr).

At the vіknі, zaplyuєmo and ruhaєmo special bellow. Vіn vіdpovіdaє for rozmіr of the future distribution. It seems that we need to pinch the GB scalings. In my case, under the new distribution, 322.242 MB were selected (or 314.69 GB).

Give respect to the lower part of the window. The hour of the movement of the child, you are in the mode real time, Bachite, how will your disk be changed after the compression, and the link will be added to the new distribution.

I installed the new partition size of 314 GB, and the size of Disk C became 150 GB. Pіslya thogo onslaught OK.

Revealed unrecognized distributed (314 GB). Now, from this unrecognized space, it is necessary to expand it.

Click on the new bear and select the command in the menu (Create split).

At the new window, I should be asked to enter a partition label, give it a name (Partition Label). Let me call it Multimedia. You must provide the Drive Letter. Do not forget about the item Optimizefor SSD, ale just like you have SSD accumulator. If you win a great hard disk, this point is not visible. File system(File Systems) - NFTS. click OK.

We wonder what happened. System Disk For example, we provided approximately 150 GB and shared it for saving files (Multimedia). Not the final result yet, but such a little one. For the program to perform all operations, press the button apply at the top menu.

To show up as a conciliator, in which information about those operations will be entered, as if they will be victorious. Onslaught YES that program is more than vikonannya. The computer will be rebooted and launched in the capture mode. Check for the completion of the operation.

After the completion of the process, I will appear at the window with information that two operations have been successfully completed. As a guide, you can help the creations of a new division.

Now the files of the system and the files of the koristuvach will be saved okremo. Appointed vikonano. Like bachite, insulting the described methods of robots and allow you to split the disk without spending money. Which one of them is reversed - the skin is made by itself. I am sure that this article was corny and helped you to get enough knowledge in your diet.

How do you choose a computer and joke best prices for accessories, then option number one computeruniverse.ru Perevіreny chas nemetsky shop. Coupon for 5% euro. FWXENXI. Far picking!

© 2022 androidas.ru - All about Android