How to unplug the front soundbar on windows 7. Unplug the front panel jacks. Connecting a headset to a computer. Adjusting the sound driver on the VIA sound card application

Often the new OS is corrupted because the front panel for headphones on Windows 10 does not work and the laptop does not work with the connected add-on. Such a problem can be software or physical. If in the first turn it is possible to turn the rosette for the headphones on the front panel, then in the event of a physical breakdown, it will happen to service center.

Troubleshooting a non-working laptop front audio panel

In order for the front panel with sockets for connecting headphones to that microphone to work normally, on Windows 10 you can install the Realtek Manager. This icon can be marked on the taskbar or on the path "Start", "Control Panel", "Realtek Manager".

Since headphones are not working on the laptop and there is no Manager, you can go to the address "C: Program Files Realtek Audio HDA" and check the presence of the RtHDVCpl.exe file. As soon as you start it, you will see a new window with the adjustment of the audio equipment.

To make sure that the headphones on laptops with Windows 10 worked correctly, go to the “Dynamics” tab and press “ Dodatkovі nalashtuvannya outbuildings".

Seen a little window. Here it is necessary to put two signs: “Open all outside nests as independent entrances” and “Open the designated nests on the front panel”.

After setting up the headphones in Windows 10, they will work correctly. However, although the sound is still the same during the day, we can tell you about the availability of drivers or physical poshkodzhenni difference. AT to this particular type varto update audio driver or vodkotity yogo do early version. As if it is not possible to open the laptop or open the cover system unit(not recommended for uninformed koristuvs) and vikonati like this:

• We know about the hearing loss. Verify, chi vin arrivals before we need contacts on the maternity pay, and also chi is not deformed underwater darts. Two types of pads can be used to connect the front panel: AC'97 and HD Audio, separate connectors with precise markings. It is important to vrahuvati this moment.

• The AC'97 type is rarely used, and it is based on the HD Audio (High Definition Audio) standard, even though there are more extensions. On the motherboard, there is a rose for HD Audio, the front panel sound may letter designation for example, F_Audio.

• However, there is no such rose, because you have pads with different designations, in the instructions before you pay, or the laptop may have a connection diagram.

• Connection plan for four connectors before AC'97 attacks:

• If you correctly connected all the roses to the computer, the system is to blame for connecting the gadget.

Varto designate what is the best way to turn on the front sound roses through tweaking the BIOS. For this varto viskonati so dії:

• Reboot the computer and boot from the BIOS (press F1 + Del, there may be other combinations).
• We know the Advanced section, then the Onboard Devices Configuration item.

• Option soundbar, called "Front Panel Type". In other BIOS versions, it may be labeled as "Front Panel Support Type", "High Definition Front Panel Audio" or "Legacy Front Panel Audio". For locking, this option is set to HD Audio. You need to change to AC97.

• In order to save that re-adjustment of the system, it is necessary to change whether headphones or speakers are used, connected to the front panel.

IMPORTANT! If you have “AC97” set in BIOS, then go to “HD”.

Even after the above-described manipulations, the earphones do not work, the varto vikonativ sprat is fixed through the Control Panel.

• Tisnemo "Start", "Control Panel", "Sound".

• At the depositor's decision, it is verified that the Dynamics were put behind the locks. Also, the "Sound" depositor may have "Microphone" tasks for the lock.

• After that, press with the right button of the mouse on an empty space and put the signs “Show the removal of the extension” and “Show the removal of the extension”.

• At the "Vidtvorennya" tab, right-click on the active extension and select the "Power" item. At the "Zahalni" branch we marvel at the list of roses. The last one is the item “Front panel roses 3.5 mm”.

• Similarly, you work yourself with the "Microphone" at the "Record" depositor.

After making changes to the system settings, reconnect the headset to the PC.

Just the way you can, like connecting headphones to a Windows 10 laptop did not help solve the problem, but turn the socket to the right one. For this varto turn up to the master.

Even more often than not, Windows 7 is corrupt, so it’s the same as other operating systems of this family, after reinstalling Windows sticking with the problem of the front soundbar, which does not work. Wanting to reinstall the system won pratsyuvala.

In this article, we can look at a set of songs that will help you turn up the sound outputs on the front panel of the system unit on the Windows 7 butt.

Why can't you work through the front soundbar?

Sounds like the problem is blamed on two situations:

• Sound driver not installed (Realtek, IDT, VIA);
• AT custom BIOS cost is the wrong type of front panel view.

So, first of all, for everything that you need to work, that is installed on your motherboard computer, go to the official website of the compiler and get the sound card driver.

Download drivers for Asus motherboard from the official website

Let's install it later, restart the PC and check if the inputs on the front panel of the system unit were not ordered.

If not, then I'll re-install (UEFI).

Here you need to click on the "Front Panel Type" option. Depending on the BIOS version, you can change it on the Advanced tab of the distribution Onboard Device Configuration or I/O Device Configuration.

UEFI Front Panel Type option

Move the next parameter to the position " AC97«.

BIOS Front Panel Type option

Even though the last sound on the front panel is not fixed, it is necessary to adjust the sound. Ring the icon of the orange speaker for the anniversary.

Sound driver system tray icon

Here we press on the gear, the folder icon or the button from the images of the wrench, we switch the AC97 front panel robot mode.

I live. The front panel with USB outputs and sound is one of the most important parts of a computer for today's hard worker. Why? Well, think for yourself, it's not so easy to insert a USB flash drive into USB port If you are on the right side of the hull, then you can’t take it on the wrong side, then you simply can’t go to the port, scorched, some unhandedness.

With a sound, everything is simpler, but sometimes in the plugged-in headphones, you don’t hang up and down the length of the cord, as it is necessary for comfortable rotting at the work station. And here everything is under the arm, you need to plug in a flash drive, be kind, or maybe headphones or a microphone, that’s no problem. If you want, what I'm telling you, you yourself sing along, miraculously know about the large and fat pluses of the front panel.

What am I leading up to? On the right, in the fact that sometimes on some computers, a panel is given that works only half. Tobto, function less USB port, But there is no sound, it is necessary to connect both headphones and a microphone. In the aftermath of what are created by the very same unhandedness, about which I guessed dekilkom with propositions more.

Therefore, at once we will try to know the reason why, when headphones are connected to the front panel, there is no sound and we can correct it to restore the full working functionality of our panel.

Diagnosing why the sound is not working on the front panel

Otzhe, the first visnovok can be robiti once. If USB is working, it means the panel itself is correct. And, obviously, it’s not great, that once the connection port of the headset and microphone is burned out, it’s even more rare.

Well, we’re plugging in headphones or speakers in green roses, some sort of stitching on the back of the case and it’s possible that there is a sound. However, you may need to install a sound driver for your audio device and install it again (How to install the driver). Well, navpak everything is garazd, once we pass to the offensive krok.

Another reason, through which the sound on the front panel may not work, is incorrectly connected, or the connection is wrong. At this time, it is readable, how to connect the front panel and vikonuemo all the recommendations, as I gave in those articles.

One more thing, the connection connectors can be separated one by one, which can be used to determine the correctness of their connection. At such a time, you will have a chance to get a helper from work motherboard and from applications like pictures are connected to that order. Like what, write me in the comments, I can help you.

Also, the panel was connected, otherwise, if it was already connected, demo was given. Persh for everything, I will direct the butt for windows XP. We go to the "Control Panel" and we know how to adjust the sound "Sound and audio extension". Vіdkrivshi їх, go to the "Audio" tab, from the list of attachments that are used for locking, select "HD Audio" (or Realtek AC97).

Ale cey vybir mozhe deposits depending on what kind of connector you plugged in to the motherboard. If it is AC 97, then it is necessary to select such a driver itself, if it is signed by HD Audio, then it is necessary to select the driver with the given name.

Even if only one connector is connected, it means more for all HD Audio, so, in the application, I won the yoga itself. Those same, robimo and in the lower field, having chosen the main attachment for the record, and press "OK" to close the window.

In Windows 7, everything is simpler, here the driver is selected automatically, mainly Realtek HD AUDIO.

Having selected firewood, we start restarting the computer and then, we try to get to the BIOS by pressing the F2 or DEL keys. On the Advanced tab, select Onboard Device Configuration. In the menu, going to the "High Definition Audio" item, the "Enabled" value is set, And in the "Front Panel Type" row, "HD Audio" is selected (or AC97, which is windows fixed buv obrany same vin), so we installed such a driver in the system.

The main principle of using the settings is that windows and BIOS have the same type of software installed. Well, if there are differences, then you yourself will understand that there will be a system conflict as a result of which there is a problem with the sound on the front panel.

I’ll signify those that you don’t have these points in the BIOS - it means that you don’t need to do anything in the new one. In such cases, even if you do not work the sound on the front panel, check again whether the driver is connected to your sound device and the correct connection of the connectors on the motherboard.

Well, and pіdbivayuchi pіdbags, I want to say that if you install the same driver in both modes, everything is pratsyuvatime as required. So, sometimes it can be adjusted at the same time from the system hour through those that the battery vibrates in the computer, as it supports the hour of the switched off PC mode. How, how її replace You can recognize the axis here, with the details and butts at the sight of the pictures.

infocomp.com.ua

How to turn on the audio on the front panel

Front panel audio problems are most often caused by incorrect settings. At the time, if there is a sound on the front panel, robimo takes ...

These recommendations are for the rest of windows operating systems - XP, 7 and 8. Correctly pratsyuvati the soundbar is to blame for the presence correctly installed driver to match Realtek sound. Even though you have є і lashtovannye, then on the panel zavdan tse may be hung.

If the driver icon is not visible on the Start panel, go to Start, go to the Recovery Panel, and find "Realtek Dispatcher".

Likewise, the wine is available and there, it is possible, the wine is in the folder C: Program Files - Realtek - Audio - HDA. Run the RtHDVCpl.exe file. After the launch, you may have a smut of the Realtek dispatcher. The presence of the Realtek folder in the Program Files folder is confusing updated version sound card driver. You can do this on the official Realtek website. After the driver is downloaded, install yoga on the computer.

After starting the Realtek driver, press the Dynamics button. Why click the folder in the right upper codend. See the "Nest parameters" window.

The computer is obliged to see you ahead of time "If the designated front panel socket is not working properly, set this ensign to the item" Remove the designated front panel socket". Mark the item with a checkmark. Dali - Ok.

If you got everything right, then the front audio panel can be repaired. Something that does not seem to be, perhaps, an incompatibility with the computer. Return to the specialists.

SovetClub.ru

Do not use headphones and microphone on the front panel - Audio and video

On the back of the mustache, it’s normal for headphones and the microphone works. When connected to the front panel, it's quiet, so the sound jacks on the front panel are not connected to the motherboard, although everything is fine there and everything works wonderfully in Windows XP (I have to use a different system). How to solve this jamb and fix the sound on the front panel

Thank you very much. Everything ordered. True, the microphone was at the included outbuildings, but after raising the point that shows the outbuildings, everything went well.

z tsim pratsyyuyut all roses in the "sіmtsі" Official company certification sound driver - sigmatel-IDT High Definition Audio Driver (WinXP/Vista/Win7_x32_x64) windows XP 64bit version; windows vista 64bit; windows vista 32bit; windows 7 32bit; windows 7 64bitarchives: zipStatus: Freesize:25.7MB often joked like SigmaTel STAC9221 A2 @ Intel 82801GB ICH7 - High Definition Audio Controller

I also installed qi drivers. But then it turned out that I just did not connect the front rose to the motherboard when the computer was folded. And besides, as I plugged in the darts and the front and back roses worked normally. Also, the drivers are normal, robots. But I give respect to koristuvachivs, so don’t read those until the end - only drivers on sound cards with a Sigmatel chip

Discussing tsієї those ZDIY

rhpc.ru

[deleted] Headphones on the front panel do not work

Even more often sound the situation, if there are roses on the front panel of the system unit for connecting headphones and a microphone, but there is no sound and there is no stink. So it seems that the system block hacks don’t forget to plug in the roses, zmushyuyuchi koristuvach independently crawl into the system unit. If you want to, it would be better if you tried it - if you already made a lot of roses for navigation to improve the competitiveness of your product, then you can turn it on! Ale, don't be so hard on yourself. That's why the roses for the headphones on the front panel are connected to the motherboard, and the reason is in the fittings.

Naturally googling and knowing the different options for solving the problem, I have robbed the attack of the problem:

Best parts of the cause sound in the headphones on the front panel:

However, the main universal solution to the problem is to buy a headphone jack for headphones with a rose of 3.5mm, connect it to the rear, replace the front panel and use it in a new speaker, then headphones. Put some podovzhuvach here behind the monitor, so that if you could, you could reach out with your hand.

Earmuff holder 3.5 mm

Also, in our days, it is already possible and inexpensive to equip bluetooth headsets, which allow you to use the wires with different headphones. I bought a Sony-Ericsson MW-600 and am more than satisfied.

In the comments, you can ask or describe your mood, in this way you will help other bad guys.

stepasyuk.org.ua

Not working front panel for headphones in windows 10

Often, the new operating system is corrupted, because the front panel for headphones on Windows 10 does not work and the laptop does not work with the plugged-in add-on. Such a problem can be software or physical. If in the first place it is possible to turn the handset of the rose of the headphones on the front panel, then in case of physical damage, you will have to go to the service center.

Read also: Why don't headphones work in Windows 10 and how to fix them?

Troubleshooting a non-working laptop front audio panel

If the front panel with sockets for connecting headphones and a microphone worked normally, on windows 10 the Realtek Dispatcher was to be installed. This icon can be marked on the taskbar or on the path "Start", "Control Panel", "Realtek Manager".

Since headphones are not working on the laptop and there is no Manager, you can go to the address "C: Program Files Realtek Audio HDA" and check the presence of the RtHDVCpl.exe file. As soon as you start it, you will see a new window with the adjustment of the audio equipment.

So that the headphones on laptops with Windows 10 worked correctly, go to the “Dynamics” tab and click on “Additional adjustment of attachments”.

Seen a little window. Here it is necessary to put two signs: “Open all outside nests as independent entrances” and “Open the designated nests on the front panel”.

After this, the headphones are fixed in windows 10 to work correctly. However, although the sound is all the same during the day, it can be evidence about the presence of drivers or the physical failure of roses. If you want to change the audio driver, or roll it back to an earlier version. If you don’t use roses on the front panel, as before, if you don’t recognize the system, you can unlock the laptop or open the rear cover of the system unit (not recommended for under-informed coristuvachs) and vice versa:

• We know about the hearing loss. It is verified that the number of connections to the required contacts on the motherboard, as well as the fact that the underwater rods are not deformed. Two types of pads can be used to connect the front panel: AC'97 and HD Audio, separate connectors with precise markings. It is important to vrahuvati this moment.

• The AC'97 type is rarely used, and it is based on the HD Audio (High Definition Audio) standard, even though there are more extensions. On the motherboard, the front panel is equipped with a rose for HD Audio, for example, F_Audio.

• However, there is no such rose, because you have pads with different designations, in the instructions before you pay, or the laptop may have a connection diagram.

• Connection plan for four connectors before AC'97 attacks:

• If you correctly connected all the roses to the computer, the system is to blame for connecting the gadget.

There is another way to turn on the front sound roses through the BIOS setup. For this varto viskonati so dії:

• Reboot the computer and boot from the BIOS (press F1 + Del, there may be other combinations).
• We know the Advanced section, then the Onboard Devices Configuration item.

• The option that goes behind the front soundbar is called Front Panel Type. In other BIOS versions, it may be labeled as "Front Panel Support Type", "High Definition Front Panel Audio" or "Legacy Front Panel Audio". For locking, this option is set to HD Audio. You need to change to AC97.

Few people don’t know about current devices, how to connect headphones to a computer, but solve problems that are blamed for connection, not everyone’s power. Let's take a look at the nuances of adding and adjusting headphones for their work on different operating systems.

Connecting the headphones to the computer is not foldable on the right, but sometimes it is difficult to blame when setting up the control. Practically for all PC models sound card. It can be built into the motherboard, or it can be connected to it through a special socket. For whatever reason, the gadget can be plugged either to the back panel of the computer, or to the front panel (for example, it's a double jack).

Marveling at the little ones below, you can understand how to connect headphones with a microphone to the computer.

The headset input is always green, and the microphone input is rozhevy. Oskelki plugs of gadgets are also pofarbovani at vіdpovіdnі colors, then have mercy and insert them into other roses even more smoothly. It is necessary to insert a green plug into a green socket, and an erysipelas plug - obviously, into an erysipelas one. At the socket of an erysipelatous color, you can connect a microphone to the computer from headphones, or a third-party one. If you need to set up a plug-in for additional special software security (for Windows 10, as well as for versions 8 and 7, it can be set in automatic mode).

Gadgets are connected to a laptop in the same way. Virobnik can place roses on front panel device chi evil.

Sometimes in laptops, headset jacks are tight to shorten the term of service. To that it is not varto to lakatis, that the plug is rotten to enter at the nest.

It should be noted that the very plugs of the headset, recognized for computers, may be color-coded, as if the microphone was transferred to the headphones. Don't mix the plugs of the headset according to the colors. Іsnuє headset, for example, for phone, that there are not 2 plugs, but one, in which the contacts for the microphone and audio channels will be combined. On the new good, 3 females are visible, which separate the contacts. Two contacts serve for connecting audio channels and one for a microphone.

For new laptop models, combined nest up to which you can plug the headphones with a microphone, which can be one plug.

For such a rose, a special marking should be put. Since there is no such socket, and there are 2 standard ones, then such a headset can be connected via special adapter.

In this rank, we will understand how to connect headphones to the telephone to the computer. Headphones on the front panel are connected according to the same principle: like a microphone on the headphones, they are connected to the erysipelas socket, and to the green audio channel.

Headset connection to PC

Now you know how to connect the headphones to the computer. Ale tsієї dії is not enough for a proper robotic gadget, although most of the time you should start working on it, and you don’t need to do anything. Ale traplyayutsya vpadki, if the gadgets do not work, then it is necessary to work deaky diy.

Headset connection on Windows 7

Before that, how to fix the headphones on a Windows 7 computer, it is necessary to connect them to the back or front panel of the device to the appropriate roses (you know how to connect correctly). Then we need to run the creation of the music file. If there is a sound є in the headset, then on which connection you can finish it. At different times the sound is heard, at the headphones on the computer it is necessary to do this (this instruction should be used to set up the gadget on the laptop).

You can set the specified settings for the Windows 10 (Windows 10) operating system, as you do not know how to turn on the gadget without intermediary in it.

Microphone adjustment

Before that, how to tweak the microphone in Windows 7 or 8, as well as in Windows 10, it is necessary to fix it.

Also, use headphones with a microphone, so you can connect to your computer via USB sockets. In most cases, after their connection, the connection is made automatically.

The new operating system from Microsoft is good. Por_vnyano s earlier versions, Windows 10 is better and more stable. To a good shvidko zvikaesh, to that new problems from this OS coristuvachi react painfully. One of these inaccuracies is the lack of sound from the headphones after the installed or upgraded operating system. Call out the reason for crying out in the case of the inconsistency of the drivers, so it’s not a mistake for the retailers of the new OS. Let's take a look at how to adjust the headphones on a computer with Windows 10 and turn the music to the speakers of the headset.

Rechecking the parameters of the physical connection

In some cases, for the liquidation of the problem, do not shy away especially. Wart to reconsider the first causes of the problem - it is possible, the decision to lie on the surface.

Respect! After installing the software for the chipset, reinstall the audio driver.

Ways to adjust the headphones

Use two methods to adjust the headphones.

Driver update

Tse main method. 90% of all sound problems are due to a problematic driver package.

Realtek dispatcher upgrade

Since updating the drivers did not help, let's move on to another method.

1. Number of codecs for creation music files high vigor. You can take advantage of them.
2. Physically poor nest or sound card. At this point, it is necessary to return to the service center.

From i all. Now you know how to fix the headphones in Windows 10 and diagnose the cause of the problem.

Headphones are essential accessories, which are actively used when connected to a computer. Not surprisingly, earplugs can significantly expand your functionality. Due to the presence of the microphone, such an attachment will become indispensable when calling in Skype or other services. Not less colorful headphones for those who regularly play in computer games through the mesh, to that they allow the stench to get in touch with their comrades from the forest.

Navit is a standard function for headphones - playing music, merits for respect from the side of coristuvachiv, more so, as there is no possibility of hearing music behind the help of speakers, through the rizik to get someone.

Briefly about roses and come out

The design of most computer models conveys the presence of a sound card. As a rule, there is a sound card built into the motherboard, otherwise it is connected directly. To connect headphones with a microphone on your computer or laptop, there may be two options: one for sending sound to the headphones, the other for the microphone.

As a rule, headphones come out marked with a green color, at the same time, as for a microphone - erysipelatous, prote not rarely can be connected linearly. On the panels of the computer, sound the symbols, which will help you not to have mercy on what kind of rose you need to insert.

Headphones, like vikoristovuyutsya on computers, more precisely їх plugs, are also marked with more significant colors. This is why it’s worth considering these kinds of great headphones for music players, so there’s no way to find out about marking.

One more thing about computer headphones is their durability. Zavdyaki podovzhenuyu that tovstіshomu cable, so the headphones can serve significantly longer than the best ones, and for the most part, the stink of the best ones.

To connect headphones, it is enough to correctly insert them at the roses of the computer: a green plug for green roses, an erysipelas plug for erysipelas roses. After that, you need to adjust the headphones for help with a special program.

Connecting headphones on laptops is absolutely identical. As a rule, the roses for headphones and the microphone are placed either on the left side panel of the laptop, or on the front panel, which is placed on the opposite side of the case. Before speech, as headphones do not fit easily at the laptop socket, do not think that the stench does not fit. Most of the makers of their products are specially robbed of roses with tight headphones, so that the stench will last longer.

New models of laptops can be combined with roses, for the help of which they connect headphones with a microphone. The stench can be not marked with more colors, the proteo of roses will be roztashovuyutsya symbols, yak help to orientate, where to know the necessary roses.

Connecting headphones to a computer

Since you have inserted the headphone plugs into the different sockets of your computer, it is necessary to check what the stench is. For more fluctuations, after the procedure, the sound will already play in the headphones, and the headphones will not be forced to close.

However, there are fluctuations that after the correct connection of the headphones to that computer, the sound does not sound. In my opinion, the next thing to do is:

1. Verify that the headphones themselves work. The problem may lie with their non-practice. For re-verification, it is recommended to use a vicorist, whether it be a working device with the output of headphones: a TV set, an MP3 player, a video-programmer, a tablet.

2. Another reason, through which the headphones do not produce sound, is the lack of necessary drivers. To check the availability of drivers, you need to turn it on sound file on the computer through the stovpchiki. If the speakers work, then the drivers on your computer are installed, and the problem is in another.

I guess, as there are no drivers on your computer, next go "Appliance manager" through the keruvannya panel.

Dali next to know the rows "Sound Outbuildings"і "Audio output and audio input". On the contrary, it is not their fault that there are signs at the sight of signs of a call or a cross. If you are looking for such symbols in the opposite rows, you need to reinstall the drivers on your computer.

3. You may have messed up with the fact that everything is normal with the drivers and headphones on your computer, it is possible that the minimum volume is set on the computer. To fix it, you need to know the speaker icon in the lower right corner. A mixer will appear on the screen, which allows you to control the level of sound.

You can also change the sound without setting the sound to a minimum "Control panel" in retail "Sound", send "Adjustment of density".

The varto also means that for additional indicators, which are displayed in the sound mixer, you can indicate that the sound is being played by a computer. If the current sound file does not work, the mixer does not crash.

For those who use headphones with a microphone, it’s also worth knowing about those who can use the microphone’s work at the depositor "record", as to be known in the distribution "Sound" in the panel keruvannya.

If there is no sound in the headphones on your computer, it is necessary to be aware of the possible reasons for the presence of the sound. Of course, the reason for the presence of the sound may be the inadequacy of the sound card, and even then the computer needs a specialist.

Connect headphones and speakers to the computer in parallel

It’s not alone, if the computer can only have one rose for connecting both speakers and headphones. Obviously, it’s not so easy to change the outbuildings, it’s more, if you wear roses from time to time, and wines will be better practiced. One of the ways to solve the problem is to connect the headphones to the speakers, which, in turn, are connected to the computer. However, such a decision is only possible for the best headphones, as the microphone cannot be used.

The optimal solution to the problem is in the parallel connection of headphones and speakers to one computer jack. Which way to do it handy, so that the sound is practical like that of speakers and headphones, and at that moment, if you need to use only headphones, you can easily turn on the speakers with the power button.

The Danish method is only possible for the availability of a special rozdviyuvach, which you can get at the radio store or cable store. The price of such a cord is between 100-150 rubles.

Video on connecting speakers and headphones one hour for Windows 7

How to connect headphones with a microphone

It was more obvious that the headphones with a microphone could be specially marked, and that two plugs could be used - one green (headphones) and the other erysipelas (no middle microphone). Such marking is on the majority of models of headphones with a microphone, and it is necessary for it to be able to run without problems and connect to a computer attachment.

As a rule, it looks like this:

First of all, it is necessary to insert the headphone plug into the main sockets at the computer panel, and the same plug into the microphone. Since you have installed the headphone plugs at the main socket of the computer, you need to step forward:

1. For koristuvachіv Windows XP: go to control panel, select item "Sounds and audio equipment", select item "Mova"

2. For shortlisted Windows 7: go to the control panel, go to the distribution "Sound" and choose option "Revival".

If your headphones are connected to the computer correctly, on the contrary, green icons stand in the same row. Here you can adjust the earphones at the appropriate outlets.

USB works, the "rear" rose (on the motherboard) creates sound, but in the front panel - silence. It’s not easy for me to climb up and down steel, so try and forgive me, you know you can cause why you can’t make a sound!

Cause

Scheme of the rose front panel on the motherboard

Note:
є 2 audio standards:

AC "97 (abbreviated as Audio Codec "97) - the standard for audio codecs created in 1997. This standard is played out in motherboards, modems, sound cards and cases with an audio output on the front panel. AC "97 supports a sampling rate of 96 kHz with a 20-bit stereo sampling rate and 48 kHz with a 20-bit stereo sampling rate for rich-channel recording. Intel technology® High Definition Audio (HD Audio).

HD Audio

The sound may not work through those that simply do not have a driver for your sound card. Otherwise, the software is installed incorrectly on your audio device.

Go, Start -> Control Panel -> Sound ->

Realtek HD Dispatcher --> Rose Parameters -->

Not long ago, having taken all his own new building. The case has a front panel with USB outputs and sockets for a microphone and headphones. Ale axis bad luck: the sound on the front panel does not work! USB works, the "rear" rose (on the motherboard) creates sound, but in the front panel - silence. It’s not easy for me to climb a pid steel, for that way I tried and pardoned a mustache possible reasons why can not pratsyuvati sound!

Cause why can not pratsyuvati sound:

There is still no sound on the front panel of the case, for which there may be a few reasons and it is possible to resolve:

Solution 1: Check if the front panel roses are connected correctly to the motherboard.

Note:
є 2 audio standards:

AC "97 (abbreviated as Audio Codec "97) - the same standard for audio codecs, created in 1997. This standard is played out in motherboards, modems, sound cards and cases with an audio output on the front panel. AC"97 supports 96kHz sampling rate at 48kHz at 20-bit stereo sampling rate and 48kHz at 20-bit stereo for rich channel recording. In 2004, AC"97 was replaced by Intel® High Definition Audio (HD) technology

HD Audio
The Intel® High Definition Audio Sound Subsystem is based on a specification issued by Intel Corporation in 2004 that ensures sound performance more quantity more channels high quality sound, which was ensured when using integrated audio codecs, like AC "97. Hardware features based on HD Audio support 192 kHz / 32-bit sound clarity in dual-channel and 96 kHz / 32-bit in rich-channel modes (up to 8 channels).

Microsoft Windows Vista podtremue less acoustic peripheral outbuildings High Definition (for example, front panel audio solution).

Solution 2: Update sound driver.

Get the driver from the realtek official website or the maker of your soul.
You can also speed up the program automatic update drivers.

The sound may not work through those that simply do not have a driver for your sound card. Or not installed correctly software security to your audio device.

Solution 3: Correctly configure the software (driver) to the sound setup.

If the sound does not work on Windows 7, try:
Go, Start -> Control Panel -> Sound -> Digital Audio Select Locked.

Realtek HD Manager --> Socket Options --> check the box next to "Turn off front panel jack"

Check the box to disable the front panel socket.

4. Other solutions:

Customized BIOS

In the BIOS "e, you can try to enable AC" 97 override HD Audio or otherwise.

Replacement (soldering) of the front panel

You can try plugging the audio output directly to the motherboard.

pinout on the motherboard (see Intel standard)

pinning at the dermal fungus of the corpus is seen, to marvel at the sites of the vibrator.

As an option, know the front panel of another picker :)

Change the body

As a radical way - change the case to the firm of another breeder. On Thermaltake cases, the sound on the front panel is definitely working! Confirmed by practice.

• Be kind, explain why I have to reinstall Windows 7 sound realtek card, sound drivers installed from the motherboard CD, Realtek Manager installed and in operating system sound e. And I connect the headphones to the front panel, and there is no sound, until the operating system is reinstalled, the sound is buv. George.
• Sheet No. 2 Give me a hint on this power supply, recently I reset my BIOS to default (for locking) and now I have not working front soundbar, If you want to say it is necessary to install the Realtek dispatcher, but I didn’t have it, it means on the right in some other way, singsongly in the BIOS settings. Anton.
• Sheet No. 3 Why in me no sound in headphones in Windows 7 when connected to the front panel? Realtek sound card. On one of the forums on the Internet, I was encouraged to go to the annex building and just turn on the headphones, but I can’t go out, as it says on them Attachment from support High Definition Audio Not connected And if you click on them with the right mouse, then you will see the same menu and you can turn them off, but not turn them on. I read it on one site that you need to go to Start->Control Panel->Sound - on the tabs Reopening abo Record choose the correct attachment and press For promotions, but also do not help. Kristina.

Front soundbar not working

there is no yoga there, go to Start - Control panel- Realtek Dispatcher. Windows 7

how is it there vin tezh vіdsutnіy, try to know yoga from daddy

bachimo advance If the designation of the front panel nest is not correct, set the ensign on the item., check the box next to this item and emboss OK .

After that, the front soundbar can be ordered.
In the operating room Windows systems The Realtek XP Manager looks a little different, but the essence is the same. Press the left bear on the button with a wrench

and in the window, which is marked with a tick Unplug the front panel socket ta ok,

the front soundbar can be replaced.

Can we still press the button Dodatkovі nalashtuvannya add in this vіknі and vіdreguluvat everything that we need, for example, point out -. This means that when the headphones are connected to the front soundbar, the speakers are connected to the motherboard in the back, it will turn on again.

Windows 7

Now I'm moving on to another sheet. Friends, the drivers for the sound card are installed and the sound is present in the system, but the front sound bar does not work, causing two to sound.

First of all: the front sound panel you have is working for three years old with the AC "97 standard and the cable that goes in it goes to the socket on the AAFP analog audio front panel motherboard ( appointments especially for the reception of audio roses in the front panel).

• AC'97 is already an outdated standard audio codec, a veteran can be said to have been developed by Intel in 1997, it is found in motherboards, as well as cases with an audio-enabled front panel. And from sound subsystem, built into your motherboard, working on the new standard - High Definition Audio or HD Audio, You can't go through the front soundbar. Intel High Definition Audio - a notably new specification for audio codecs, expanded by Intel in 2004, which is supported by a reduced quality of digital sound, which has increased the number of channels, more high frequency bandwidth at the port of AC "97.

And choose the option that goes for the Front Panel Type sound panel, it can also be called like this:
Front Panel Support Type, High Definition Front Panel Audio Legacy Front Panel Audio

rearrange її to the position, take the change of settings and probably from the BIOS. After re-adjusting the front soundbar is to be repaired.

So just as you have the front panel working in HD Audio, then in the BIOS you need to switch from the position to the HD Audio position. Have some vipadku experiment.
Friends, please plug the AC "97 front soundbar to the AAFP socket on the motherboard of the High Definition Audio specification,

Then everything is miraculous with you, only in some kind of fluctuations, when you put the headphones up to the front sound panel, in the sound speakers sound will not turn on navіt yakscho you іklyuchat in the settings of the dispatcher Realtek item Turn off the sound of the rear external speaker.

All in all, the front sound panel jacks should use a simplified wiring diagram for the cable and outputs of the AC97 front panel.
There are two options here, the first one is soldering (not so easy), the other one is to buy a new case, for an additional HD Audio front sound panel, and when you get a new computer, check everything with the seller, do not be surprised, as when buying a new system unit in an unspecialized supermarkets, zіtknetesya with the total lack of information of consultants with whom food.
Well, the rest is necessary to be confused in that case, as you don’t have a front sound bar, it’s plugged out to the mother’s pay for an additional cable, sometimes you just forget to come with the computer folded, like on this bug.

The AC "97 front sound panel cable was plugged into the AAFP analog audio front panel socket on the motherboard.

Well, Christina from the third sheet we put new version drivers from the official website and patched the front soundbar in Dispatchers Realtek, everything is written in our article How to install sound driver report.