Why is there no disk on the computer d. Why is there no D drive on the computer? Causes of a disc or a logical partition

With a similar situation, there is a large number of koristuvachiv not only Windows 10, but th. Disk D just disappears and does not appear in the list local disks. The main part of the necessary important information, because of the great need to update disk D.

In this article, we know that you can try to rotate the D drive into My Computer on your own.

Why does Windows installation recognize drive D?

If you didn’t format and didn’t see the D drive for the first time, then the problem lies more in the “evil” letter of the local disk, as if for some reason it was not assigned to you when the OS was first taken. Tse mozhe statisya through poshkodzhennya file table or pardon, scho winkla pіd hour of system installation.

Naypriёmnіshe pіd hour tsgogo - given the problem is easy to fix.

How to rotate the D drive, what sign after installing Windows?

For this, right-click the mouse on the "Computer" icon on the desktop and select "Management".

You can also right-click on the mouse on the Start menu and select "Computer care".

Transition to keruvannya by computer

At the top of the screen, select "Disk Management".

Disk management

At the lower part of the vein, near the “Disk 0” row, give respect, because there is no division without a letter. Looking at the wines approximately like this:

We know a disk without a letter

Click on the new right mouse button and select "Change the drive letter or go to the drive."

Select a disk without a letter

Let's press the "Add" button.

There are situations, if after installation, updating, or just a Windows crash on the computer, it can be an abyss disk D. Physically wine, like before, to be in one’s own place, but the bachiti yoga system is guided, and different ways virishiti do not help the problem. What is the job of such a situation? For this material, I’ll tell you how to live it, like missing the D drive on Windows 7 and 10, I’ll dig up the causes of this dysfunction, and I’ll also explain how to fix it.

When looking at the causes of the problem, it’s important, first for everything, it’s important, why can’t we see it on the right - to the logical partition D on the hard disk of your PC (if the logical partitions C and D are located on one hard disk) or to the loss hard drive D (if C and D in the system are reserved for hard disks).

If there is a problem with the power supply, the causes of the problems in the circulation of disk D can be as follows:

How to fix the problem, like "Disk D missing"

Methods of solving the problem of the capacity of the disk D can be a sprat, but, again, I can lie in the fact that you have lost a logical partition on a hard disk or an okremic physical disk. Let's take a look at the solutions in order.

Missing logical disk D

Otzhe, let’s say you have a Winchester, on which it is traditional to add two logical splits - C and D. Once split D is just a sign. What do you need to grow?

1. Assign the letter of the given logical division. Finish off common cause loss of distribution D є loss of identification letter (for to this particular type"D").
2. To confirm, press the "Start" button, enter the following query in the row: diskmgmt.msc - and press the input.
3. You will see a menu of discs in front of you. If your daily disk appears in the list of disks, if it does not have an identifying letter (near the “Tom” column), then you need to enter such a letter.
4. Click on the empty space of the “Tom” column with the right mouse button on our unidentified disk, select “Change the drive letter or go to the disk” in the menu.

Select "Change drive letter..."

Let's click on "Append", then click on "Assign a drive letter" (choose, for example, "E"). After the introduction of these changes is embossed to “OK”, the indications of the disk may become available for review by the explorer.

Vykorist the functionality of the program Acronis Disk Director Get it installed danish tool, start yoga, select the launch of the Acronis Recovery Expert program from the menu, how to win for inspiration hard drives.

After starting this program, select the manual mode of renewal, pressing on the unoccupied space of the hard drive.

Then we will use the guess method (we choose the swedish method). The program looks for a found disk, and it is possible to reveal yoga. Click on the disk with a bear, and then click on "Dali". Program to renew Danish disk, and the problem of disk D on the computer will be fixed.

Znick hard disc D

If your HDD (SDD) under the letter D does not appear in the system, we recommend that you check the cable connection slots that go to it hard drive(reverse the connection gap like to the socket of the hard drive, so i maternity pay).

1. As everything is connected, the pro disk does not appear, then press the "Start" button, in a row, enter diskmgmt.msc and press the input.
2. At the top of the disk management, what did you see, take a look, what is shown here is a connection (but not visible in the system) disk.
3. It doesn’t seem to work, then the problem is in the operation of the highest disk (incorrect), otherwise it doesn’t work normally from the cables of the hard disk (possible, not strong connections to the second rose and so on).

Disk D can be displayed, but there are different statuses:

The disk will be initialized and will remove the status from the “not allocated” area (if not, the disk area may have such a status). Click again with the right mouse button on the given area, and select "Create a simple volume", after which assign to your letter, change that type of file system (NTFS).

Collected "Create a simple volume"

After the end of these operations, drive D is to appear in your PC's browser window.

Video solution

If you have known disk D on Windows 7 or 10, it is important, first for everything, to be assigned to the essence of the known disk D (logical chi physical), and, invariably, victorious tools, listed by me above. After the restoration of access to the disk, I recommend checking the system for a virus (for example, Dr.Web CureIt!), as much as possible, as the cause of the dysfunction was the malicious activity of virus programs.

In contact with

A lot of koristuvachivs are created on a hard disk - C, D and beyond the list. Unfortunately, one of the biggest non-receiving problems, for which a koristuvach can get stuck - he split a hard drive, and know not to go out.
It is impossible to overestimate the size of the divisions of the hard disc. For example, in one distribution you may have an operating system installed, and in another there is a large library of films and music. When re-installed operating system that split, scho Koristuvalnik files, maybe not stuck, but it means, files to navigate from new Windows get rid of for you.

It's a pity, the problem, if you split the zhorst disk raptly, it can be extended, and the reasons that can be thrown into the blame for this problem are also sufficient.

What work, how did the sign split the hard disk?

The first thing you need to do is to spend it in the "Disk Management" menu and see if it appears in a new logical division. If so, then the division must be assigned to the letter.

For which wiklichte menu "Control panel", and then go to the distribution "Administration".

At the vіknі, scho vіdkrylos, dvіchі click on the shortcut "Keruvannya computer".

A new window will appear on the screen; "Keruvannya with discs".

For a moment on the screen, the information is requested. Carefully review the distribution of discs. If you are working on your existing partition, you will need to insert a new drive letter. For whom, click on the section with the right button of the mouse and at the hung context menu sprobіr vibіr on the point "Change the drive letter or go to the drive".

At the new window, click on the button "Change".

The system is ahead of what programs installed on the whole disk can stop working. If you want to continue, press the button "So".

Porada 2: creation of a new branch with a distant yoga association

The essence of the problem may lie in the fact that the files are in the distribution, like before, є, but Windows does not bachel it, for example, through those that have been inserted into the file system. In this way, we will try to vicariously use third-party tools, so that we can split the spread, “split” the shmatochok into the split, creating a new file NTFS system, and then just combine them.

1. For this beast to the aid of the program Acronis Disk Director Advanced(Application for zavantazhennya є in kіntsi statti). You need to take advantage qiu program on the computer, and then create in it exciting disk or a Live-CD flash drive.

2. Exit the entry to the BIOS. As a rule, for whom, at an early stage, it is necessary to take advantage of the onslaught hot key – F2 or Del.

3. Install zavantazhuvalnu flash drive abo disk as the main zavantazhuvalny attachment. For whom you need to know the division "First Boot Device"(the name of the distribution can be changed separately), and then choose the flash drive or CD-ROM first after the list.

4. View from BIOS. The computer will start to take over, and then Acronis Disk Director Advanced will appear on the screen. The utility displays a list of essential partitions, among them, you can choose the one that you can not download Windows.

5. Vykoristovuyuchi utility tools, you need to vodkaremiti in the distribution of a small shmatochok (grab dekіlkom megabytes), setting yoma file system NTFS.

6. If the division will be done, then join the association of this problematic division. Save the changes, and then reset the system by entering the BIOS, and install the hard drive from the hard drive. After leaving BIOS system zavantazhitsya pіd Windows. Reverse the mill to divide the disk - the wines can be correctly displayed.

You can let it go, you can’t see it, or you can try to successfully restore the files to go to the new one. Our manager knows the Acronis Disk Director Advanced utility to help us.

1. Follow the steps described in the last paragraph, from the first paragraph to the fourth.

2. At the Acronis Disk Director Advanced menu, select the section "Innovation of distribution", then choose a disk, so you will move away from the robot and finish watching the program.

Please be aware that the triviality of the procedure for updating files from distribution can take up to three hours (everything should be stored depending on the number of files on the disk). So be prepared for the fact that the computer will last a long time.

4. After completing the update procedure, exit the Live-CD and start the computer under Windows.

Hopefully, the data given to the lungs from the Viconan recommendations helped to overcome the problem of fermentation. Krym tsgogo, as you have є vlasny svіd at virіshennі problems, share it in the comments.

After the installation of a new Windows 10, it may be out of the situation, if the Explorer has one of the hard disks, on which the files will be saved. This problem, obviously, will require a nega vyshennya. In the article, we can look at all the wider reasons for such a problem and that lady pokrokovі kerіvnitstva on її usunennya in dermal razі.

Why after installing Windows 10 may the disc

Before fixing the cause of the troubleshooting, it is necessary to understand, with some type of problem you have encountered. Zokrema, it is necessary to recognize what has come to light itself: a logical division on Winchester (like hard drive one, vin, as a rule, is divided into parts - systemic C: and koristuvalnitsky D:, although their number may be large) or an okrem hard disk (as you have two physical storage devices installed on your computer). Most often, the coristuvachi may be on the right with the first fall.

Depending on the type of malfunction, the causes can be as follows:

1. The cable of the hard disk is not connected to the socket or the wires. As a result, the system is simply not able to pump Winchester and show it all. This is the reason to go for another type of problem - a hard drive crash.
2. On the annex, there was a vipadkovy zbіy, which caused the logical structure of the expansion of the hard disk.
3. The structure of the hard drive was damaged by small software security that penetrated the computer.
4. The letter was distributed on the zhorst disk zletila: the won was assigned to the first OS after the installation. It may be called out to the file table, or by a pardon, which was blamed for the hour of installation.
5. Logical block D: (otherwise, be it some other letter) bv zahovany like a koristuvach.
6. Before system unit a new connection, a winchester purchase, which has not yet gone through the initialization and formatting procedures.
7. The motherboard drivers need to be updated.

How to restore a lost disk on Windows 10

Іsnuє kіlka vyhodіv іz situatsії z missing disk: vіd vіd reverіzіvі physical ііnіklіnі before іnnovlennіya іrіdіv і maternalії ї. Oskіlki vіdrazu vznachit the reason not to give in, it is necessary to act in sequence: zastosovuvat method by method.

Rechecking the physical connection

As if you have two physical storage devices, and the system does not know only one of them, it is necessary to reverse, as far as possible, the cable is installed as far as possible, which will plug the hard drive and the motherboard. Obov'yazkovo see electric lines and check all manipulations with the switched-on extension.

As for the connections, everything is good, go into the BIOS and see if you can start accumulating:

1. Rezavantage the computer: if you fix it more often than not, you need to press the key, so I will bring you to BIOS menu. The keys differ depending on the model of the PC maker. The most common is Escape, Delete, F2, F10 or F8. To go to the BIOS, press one of the buttons on the top of the PC capture: Escape, Delete, F2, F10 or F8
2. If you have spent time in the BIOS menu, under the Main tab, find the items Primary IDE Master and Secondary IDE Master, as your hard disks are equipped with an IDE interface. As well as typing mini-BIOS programs, assignments for testing hardware components, recognizing them at the moment, in the description of the accumulator there will be data about the manufacturer, model, as well as general information about memory. Maybe just the value of Hard Disk. On which point to pay attention to Secondary or Primary, lie down in order to which disk is installed on the system board.
   Opposite the item Primary IDE Master or Secondary IDE Master can be the name of the disk or the word Hard Disk
3. Like in the menu opposite one of the items cost not detected Otzhe, the yoga system did not show.
   If there is a Not Detected value in the box, the computer will not boot the disk to which box
4. If your hard drives have a SATA connection, look at the points with the name and wonder at their values. Ports, to which hard disks are connected, are not guilty of Not detected or Not Installed.
   
   The order of the SATA point, which shows the rose, before which hard disk is connected, is not guilty of Not Installed or Not Detected

If you didn’t know your accumulator from the “Explorer” in the BIOS, try this:

1. Once again, turn over the quality of the connected cables and loops. Everything must be properly connected, otherwise the system will not be able to display the disk.
2. Connect the Winchester to the next rose (maybe the cause of the breakage).
3. Put a hard drive on your other PC, so it's possible. So you change your mind, the problem is not in the new one.

Even though these did not give results and the Winchester does not work on another outbuilding, let me know for diagnostics in service center. Possibly, yoga can be inspired. On another occasion, you will come across a new one.

If the BIOS is able to install accumulators, but the Explorer still does not show up, go to other ways to solve the problem.

Convert old drive letter

If the reason for the error is that the letter that represents your local drive has gone bad, you just need to turn it to or recognize a new one in the system drive. vikni Windows"Disk Management":

1. Pressing the combination of keys Win + R. Tsim mi called out to the small end of "Vikonati", for the help of such a launch, we can use the Disk Management utility. At the entry row, you can either drive it in or paste it behind the copied command diskmgmt.msc. We click on OK or press the "Introduction" key (Enter) on the keyboard.
   Paste the command diskmgmt.msc in the field "V_dcriti"
2. Tse vikno can be found in another way. Click on the icon "Current computer" with the right mouse button. From the context menu, select the item "Management" with a shield of evil.
   From the context menu "Current computer" select the item "Keruvannya"
3. In the left part of the window, click on the "Disk Management" block - now you are in the required window.
   In the left part of the city, the window distributed “Keruvannya with discs”
4. In the lower region of the vein, there are known to be hoarders without a name.
   At the bottom of the window you can find the accumulator: if you can’t name the wine, assign a letter to it
5. Press on the new mouse with the right mouse button and select the third item in the menu - “Change the drive letter”.
   Press "Change the drive letter or the path to the drive"
6. Now the little one clicks on the “Add” button and in the menu I select the letter of the English alphabet. So that all the changes are successfully saved, we press OK.
   Choose a letter for your local drive

Video: how to assign a letter to a known local drive

Initialization and further formatting in the utility "Keruvannya disks"

Tsya world pidide, as in the "Keruvannya disks" your accumulated one of two statuses: "No data" or "No distributions". At the first stage, the procedure should be started with initialization. For another, it goes down - it is carried out once a format, tobto outside purification space for the possible local disk. Reportingly, we will analyze the details in the instructions:

1. Run the system window "Keruvannya discs" using one of the methods presented in the front section of the article.
2. In the lower region of the city, you can find a hoarder for the signature “No data”. Click with the right mouse button. The context menu may have the "Initialize Disk" option available. We select with the left button.
   Click on the "Initialize Disk" item in the context menu
3. At the next vіknі, check the box for zlіva accumulating. How to choose the GPT format, so you want to work only in "ten". For others Windows versions pidide MBR. Now tisnemo for OK and ochіkuєmo for the completion of the procedure.
   Choose a disc of that style of distribution, and then press OK
4. Go to another stage - formatting. As soon as you indicate that the disk was already written “Not split”, you should omit the initialization and immediately start formatting.
5. Again press on the accumulators with the right key. From the menu, select the option "Create a simple volume".
   Click on the option "Create a simple volume"
6. Choose among the available letters for the possible local disk and type "Dali".
   Select the letter for the local drive from the dropdown menu
7. In the next window, enter the format (best known as NTFS), as well as the volume of the disk. If you don’t write anything, the disc will be re-formatted and borrowed all the free space.
8. Start the formatting process and check it out.

Formatting and renewal in the command line

Outwardly clearing and further renovating the local distribution can be found in the classical Windows consoles"Command line". The method of milking folds, it is not recommended for beginners to cower with it. However, even though the PC’s hardcore students have already written different commands in the same editor, take the next instruction for review:

1. Start the command line with the rights of the administrator. For this click on the "hit" icon, right-handed view of the "Start" button on the "Taskbar". In the field, we type cmd and we know the results of the search for the file cmd.exe. Click on the new right mouse button, and in the menu select "Run as administrator".
   Click on the row "Start with the name of the administrator"
2. Click "So", to allow " Command row» make changes to the computer.
   Press "Yes" to allow the "Command Row" to make changes to the PC
3. At the editor on a black background, we will enter a sprat of codes. When writing, it is necessary to respect it, so as not to pardon. After entering the skin code, press the Enter button on the keyboard. More often than not, diskpart.
   Enter diskpart command and press Enter
4. We can check a few seconds. After that, write list disk. The editor will have a list of connections currently accumulating.
   Another code is list disk and we look at the disk number
5. Now it’s better to select disk N, where N is the number of the disk in the transfer, which we found for the additional code list disk in the front croc.
   Type the select disk N command, de N is the disk number
6. To see the entire disk space, drive in the word clean. Check for completion of the cleaning procedure.
   Enter the clean command to format the disk
7. If the disk is formatted, it is necessary to create a new local partition using the help code create partition primary.
8. We convert the disk to NTFS format using the format fs=ntfs quick command. Check the last hour until the procedure is completed.
   Enter format fs=ntfs quick to set NTFS as disk format
9. It is called by an English letter: another code is assign letter = G, de G is the letter you want to assign to the disk. Vaughn is not guilty of spivpadati with the names of other local disks on the PC.
   Paste the command assign letter=G, where G is the letter of the local drive
10. Looks like diskpart for the help of a simple exit code.

Please accept empty volumes

After installing the OS, disk D: is usually empty. Possibly, pіd hour Windows installation the option was enabled, which allows you to pick up empty accumulators from the “Providnik”. To disable this function, create this:

1. Start the "Windows Explorer" chat window, where all the accumulated accumulators will be displayed. At the top area of ​​the window, go to the "View" tab - an additional panel will appear. Find the “Parameters” button on it and press it with the left mouse button.
   
   At the "Explorer" find the "Parameters" icon at the "View" tab
2. From the menu, select "Change folder settings and ask."
   
   Press "Change folder settings and ask" to open an additional window
3. Go to the "View" tab and find the option "Pick up empty disks". Perekonaytes, scho levoruch vіd it does not cost a tick. Yakshko won є, take away її.
   Recognize the sign for the item "Collect empty wheels"
4. To save all the changes, press "Zastosuvati", and then OK, to close the additional window.

If the option is enabled for you, as a result, you will be able to access the previously known local disk in the "Explorer".

Motherboard driver update

The system may not be able to recognize the local disk, as the motherboard for the robot does not receive important updates. It is possible to update the hardware part of the computer from the standard window "Appliance Manager":

1. The easiest way is to launch the "Appliance Manager" window through the "Search" panel: click on the magnifying glass on the "Date panel" and enter the input. If you decide to take another word, the system will immediately name it, as if you want to see the required result. We start the system service for the dependent clacks.
   At the row, ask for the prompt "attachment manager"
2. Vіknі shukаєmo ob'єkt System attachments". Rozkrivaєmo yogo: here we are called points with the word Chipset.
   Expand the item "System attachments"
3. Clicking on the first right key - select the "Update driver" option from the context menu.
   Click "Update driver" in the context menu
4. The new window is pushing for a push to launch an automatic search for an available update.
   Click on the button "Automatic search for driver updates"
5. Check, if the search ends.
   Check it out, the docking system will know the available updates for you
6. As a result, the system either installs a new update, or reminds you that the current drivers are already on the PC.
   Click on "Close" to pick up the additional ticket
7. Automatic search can not always know the update, so for the residual verification, again click on the option "Update driver" and select the manual search on the PC once again. On the front side, press "Select from the list available on the extension."
   Click on the prompt "Select a driver from the list available on the device"
8. You can see with the left mouse button item h Intel Chipset and emboss "Dal". Now it is necessary to renew the system, docking the system, it is necessary to update for this reason.
   Select the motherboard model and press "Dali"
9. As a result, you will be informed that the driver installation was successful. We repeat the procedure for all other points at the “System Attachments” branch, in the names of which there is the word Chipset.
   The system will alert you when you finish updating the motherboard driver
10. Close all the windows and restart the PC, so that all the changes in the system have gained rank.
11. After repeated entrapment, we check the presence of a hard hard disk at the "Providnik".

You can update the drivers of the motherboard by manually downloading the update package on the website of the retailer of the computer or the motherboard. Let's look at the procedure from the butt Asus laptop X555UB:

1. Let's go to the official side of the ASUS company, we know the drivers for the X555UB model. At the top of the site, we press on the “Pidtrimka” tab.
   Click on the "Pidtrimka" tab on the right upper codend sides
2. On the next side, we switch to the "Drivers and Utilities" section.
   Go to the "Drivers and Utilities" tab
3. Now, at the menu that you see, we need to select Windows 10 as the operating system - it is installed behind the locks on the laptop of this model. Drivers are more suitable for each type for the "tens". If you have a different version, you will have to search for drivers on third-party resources. When choosing a site, remember about the security of your computer - trust us.
   Choose from the menu what you see, your operating system
4. Scrolling through the drivers for which I will build: we need to know the Chipset item. Having heard yoga, click on the blue button "Zaphantage".
   Click on the "Get" button to get the drivers for the Chipset
5. Take advantage of the archives from the motherboard driver. Launch yoga and vibrate under the clapping installation file with exe extensions. Close all active for the moment on the computer and press "Dal".
   Press "Dali" at the start of the driver installer
6. On the next side of the installer, "Accept" is pressed.
   Click on the "Accept" button
7. We start the installation for an additional help button. install installer required driver. Let's re-arrange the system and check it out, so that the local disk appears at the "Explorer".
   Click on the "Install" button to open the installation of the motherboard driver

Video: how robust, how can the system not pump hard drive

The appearance of a hard drive from the head window of the "Explorer" can be different: a physical failure of the nose, an inaccurate connection of loops in the middle of the PC, a pardon in the recognized letter at the first start of the OS, the day of renewal and more. To solve the problem, it is necessary to try method after method, so that you can’t figure out the reason at once.

You turn on the computer, and split D during the day, what work? Most of all, in this situation, do not panic and think through all your actions, even if you have thoughtless actions, you can spend all the money on a certain distribution.

How to restore disk D?

1. On the “My computer” icon, right-click on the mouse and open the “Keruvannya” menu.
2. At the left side of the “Keruvannya” menu, find “Keruvannya with discs” and open it.
3. At the right vіknі there are disks, marked with literal meanings. If there is no letter value on the disk space D, it is necessary to set it by right-clicking the mouse on the disk without a value and selecting the "change drive letter" menu. Be respectful, the space of 100 MB is not to blame for the mother letter, the region of the operating system is captivating.
4. If there is no space distribution on the D disk space, then we need the Acronis Recovery Expert program to enter the software package for working with Acronis Disk Director disk spaces. Come and take advantage of the program.
5. Starting the Acronis Disk Director software package, in the left part of it, Recovery Expert is known to start.
6. Select manual mode for pushing forward and pushing further

7. At the menu that hung, we choose not to occupy the space and embossingly far away.

8. Let's ask us to choose the method of poshuk, we'll be called a shvidky poshuk.
9. The program finds out information about disk D. It is necessary to see and press far.
10. The process of renewal will begin, which may be three hours a day. After the process is completed, you will get the result: It's on the verge of distance. Sweat at the onset of the future, press hard.